Allmakes4x4 Parts

Window Channel

Window Channel

Window Channel, 26.5 in (673 mm), a felt-lined glass run channel for the rear body side sliding windows. The glass slides within the channel, whic...

Bracket

Sliding Window Catch for the front door sliding window assembly on Series Land Rover models. This black plastic catch secures the sliding window p...

Instrument Cover is the trim cover for the instrument pack within the facia assembly, enclosing the main gauge cluster. It is also used as the cov...

Dashboard Assembly Plate is a structural panel within the facia assembly, forming the mounting base onto which the instrument panel and dashboard t...

Air Vent Mechanism - operating mechanism for the dash-mounted fresh-air ventilator. Controls the opening and closing of the bulkhead air vent flap...

Headlamp Guard in galvanised steel. A protective grille fitted over the headlamp lens to shield it from stone chips, debris and impact damage. The...

Interior Mirror for Series Land Rover models. Direct-fit interior rear-view mirror providing rearward visibility from the driver's position inside...

Spare Wheel Bonnet Strap, the retaining strap for a bonnet-mounted spare wheel. Secures the spare wheel in the bonnet-top carrying position, holdi...

Door lock RH

Seat Belt Bracket for the front seat belt, lower mounting, left-hand side. This bracket bolts to the seat box and provides the lower anchorage poi...

Transfer Gear Lever Gaiter for the high/low ratio selector lever on the Series Land Rover transfer box. This rubber gaiter seals around the transf...

Handbrake Gaiter for the L-shaped handbrake lever on late Series IIA and all Series III models. Fits the oval aperture through which the lever pass...

Mounting Stud

Side Panel Buffer, a rubber buffer fitted at the rear body side panels. Sits between the upper and lower rear quarter panels, cushioning the joint...

Cab Body Panel Mounting Bracket - a body bracket that locates and secures a cab panel to the surrounding body structure. It provides the fixing po...

Window Channel - Front Door

Turnbuckle is the semi-circular catch that fastens the seat box and rear tub locker lids down. It rotates over the mating hasp to hold the lid shu...

Hasp for the seat box and rear locker lid. The hasp fastens the lid closed, engaging the turnbuckle on the box body to hold the lid down and seal ...

Rubber Seal fits along the joint between the truck cab base and the rear body, sealing where the cab meets the tub. It forms a continuous barrier ...

Hood Fixings - hood stick set for the full canvas hood on Long Wheelbase Series vehicles. Hood sticks are the metal bows that form the internal st...

Tailgate Hook for the lower hinged tailboard, right-hand side. This pigtail (spiral) hook mounts on the body and retains the tailgate support stra...

Pillar seal

Rubber Mat - ribbed rubber loadspace mat for the rear floor of short wheelbase (88-inch) models. Measuring 1177 × 920 × 3mm, the mat covers the re...

Steering Box Cover - LHD - inner wing mudshield for the steering box. This pressed cover fits over the steering box on the inner wing panel, shiel...

Wing Panel (Aluminium, Front Outer, Right-Hand) is the outer front body panel covering the right-hand front wheel arch. It forms the visible body ...

Sill Panel (5" Deep, Rear, Left-Hand) is the lower body panel that runs along the left-hand rear body side beneath the rear body aperture. It form...

Sill Panel (5" Deep, Rear, Right-Hand) is the lower body panel that runs along the right-hand rear body side beneath the rear body aperture. It fo...

Sill Panel (5" Deep, Front, Left-Hand) is the lower body panel that runs along the left-hand front body side beneath the door aperture. It forms t...

Sill Panel (5" Deep, Front, Right-Hand) is the lower body panel that runs along the right-hand front body side beneath the door aperture. It forms...

Door Cap (Galvanised, Left-Hand) is the capping rail that forms the top edge of the left-hand front door frame around the window aperture. The gal...

Castle Nut (castellated nut) used to retain halfshafts, output shafts and differential pinion shafts in Land Rover axle and drivetrain assemblies. ...

Track Rod End with left-hand thread, part of the steering linkage. The track rod end connects the track rod to the steering arm through a ball joi...

Track Rod End (Right-Hand) is the ball-joint connector at the end of the steering track rod, linking the track rod to the steering arm. It transmi...

Rear Bench Seat Assembly in grey vinyl, comprising a cushion, backrest, frame, and fitting kit for direct installation in the rear load area. The ...

Front Mudflaps, supplied as a pair. The mudflaps mount behind the front wheels to deflect road spray, mud and stones thrown up by the tyres, prote...

Rear Mudflaps - a pair of rear mudflaps for the 88in short-wheelbase, fitted behind the rear wheels to deflect road spray and debris thrown up by t...

Floor Panel Screw with a mushroom head profile, used to secure floor plates and lower rear body panel assemblies on the Defender. The low-profile ...

Door Clevis Pin for the door check strap mechanism. The pin locates the check strap to its mounting bracket, forming the pivot the strap works aga...

Rear Quarter Seal - the rubber glazing seal that secures the fixed rear quarter window into the hard-top body aperture. Sized for 5mm glass, it be...

Gear Lever Gaiter for the transmission tunnel. This flexible boot fits around the base of the gear lever where it passes through the tunnel, sealin...

Bonnet Canvas Rest Strip for the front body assembly. This canvas strip mounts across the top of the radiator/front panel, forming the surface the ...

Brake Rear Drum Sprite 1-3 & Midget 1&2