for Discounts / VAT
for Discounts & Correct VAT
Delphi suspension and steering components are trusted by mechanics and Land Rover specialists for their durability, handling performance and reliable engineering. Known for producing high quality control arms, ball joints, sensors and braking components, Delphi parts are widely used on Land Rover vehicles that require dependable performance both on road and off road.
Fuel Filter - the primary fuel filter in the low-pressure supply circuit of the 3.0L V6 diesel engine. Positioned between the fuel tank delivery l...
View full detailsUpgrade your braking performance with this OEM Delphi brake pad and caliper kit, specifically designed for Discovery 4, Range Rover Sport (2010-202...
View full detailsBrake Pad Wear Warning Wire for the rear brake pad wear-indication circuit. The sensor wire is routed into the friction material of the rear brake...
View full detailsSteering Track Rod is part of the steering linkage, connecting the steering gear to the road wheels. It transmits steering input from the rack to ...
View full detailsRear Brake Disc - vented. Part of the rear brake discs and calipers assembly. The disc mounts to the rear hub flange and provides the friction sur...
View full detailsSuspension Arm - front lower arm, rear position, left-hand side. Part of the Front Suspension Lower Control Arm assembly. The arm locates the lowe...
View full detailsSuspension Arm - front lower arm, rear position, right-hand side. Part of the Front Suspension Lower Control Arm assembly. The arm locates the low...
View full detailsFront Brake Pad Kit for vehicles built with the size 20 front disc and caliper package, supplied as a complete front axle set. The pads work in th...
View full detailsFront Brake Pad Set - the friction pads for the front-axle disc brakes. The pads sit in the caliper and are clamped against the brake disc by the c...
View full detailsMaintain reliable handbrake performance with this OEM handbrake shoe & lining kit, designed for Land Rover models requiring a 1-wheel applicati...
View full detailsBrake Pad Set - Rear - friction pad axle set for the rear disc brake assembly. The pads locate in the rear caliper carriers and clamp against the ...
View full detailsBrake Pad Kit - Front - front axle set of disc brake pads for the 19-inch front brake disc and caliper installation. The pads are clamped against ...
View full detailsAnti Roll Bar Link
Rear Brake Disc - vented. Part of the rear brake discs and calipers assembly. The disc mounts to the rear hub flange and provides the friction sur...
View full detailsRear Brake Disc - a vented rear-axle brake rotor forming part of the rear disc-brake assembly. The disc is bolted to and rotates with the rear whe...
View full detailsFront Brake Disc - a vented front-axle brake rotor forming part of the front disc-brake assembly. The disc is bolted to and rotates with the front...
View full detailsBrake Disc - front vented brake disc forming part of the front braking assembly. The disc provides the friction surface against which the front br...
View full detailsFront Brake Pad Kit for vehicles built with the size 20 front disc and caliper package, supplied as a complete front axle set. The pads work in th...
View full detailsRear Brake Disc - a vented disc from the rear brake disc and caliper assembly. The disc is mounted on the rear hub behind the road wheel and rotat...
View full detailsRear Brake Disc - a vented disc from the rear brake disc and caliper assembly. The disc is mounted on the rear hub behind the road wheel and rotat...
View full detailsBrake Disc - Front - ventilated front brake disc for the front brake discs and calipers assembly. The disc measures 380 mm in diameter by 34 mm th...
View full detailsBrake Disc - Front - ventilated front brake disc for the front brake discs and calipers assembly. The disc measures 363 mm in diameter by 33 mm th...
View full detailsFront Brake Disc - vented cast iron disc for the 18-inch front brake package. Mounts to the front hub behind the road wheel and provides the frict...
View full detailsBrake Pads - Front - friction pads for the front axle of the uprated Brembo front brake assembly. The pads sit in the fixed Brembo caliper and cla...
View full detailsFront Brake Pad Kit - friction pad set for the front disc brake assembly, for the 380 mm front disc and size 20 caliper configuration. The pads lo...
View full detailsFront Radius Arm - LH is a suspension linkage in the front suspension assembly. It connects the front subframe to the wheel knuckle and controls th...
View full detailsFront Radius Arm - RH is a suspension linkage in the front suspension assembly. It connects the front subframe to the wheel knuckle and controls th...
View full detailsBrake Pad Set - friction pads for the rear axle, part of the rear disc brake assembly. The pads sit in the rear caliper either side of the disc an...
View full detailsBrake Pad Caliper Kit
Suspension Arm - upper front control arm for the left-hand side, 247 mm between pivot centres. The arm ties the top of the front wheel knuckle to t...
View full detailsSuspension Arm - upper front control arm for the right-hand side, 247 mm between pivot centres. The arm ties the top of the front wheel knuckle to ...
View full detailsBrake Disc for the rear axle. This disc is the rotor that the rear caliper clamps to slow the wheel. Sized for the 20-inch brake disc and caliper ...
View full detailsFront Suspension Arm is a lower control arm in the front independent suspension, locating the wheel hub carrier relative to the chassis subframe an...
View full detailsFront Suspension Lower Arm - RH for the front axle suspension assembly. This right-hand lower control arm connects the front subframe to the wheel...
View full detailsInner Track Rod Ball Joint is the inboard steering joint that connects the steering rack to the track rod. With an M16 thread, it threads into the...
View full detailsBrake Disc - front axle, vented, 360mm - operating in the hydraulic disc brake circuit at the front wheels. The internally vented construction cha...
View full detailsAnti-Roll Bar Link - Front connects the front anti-roll (stabiliser) bar to the suspension, forming part of the front anti-roll bar assembly. The ...
View full detailsSteering Track Rod is part of the steering linkage, connecting the steering gear to the road wheels. It transmits steering input from the rack to ...
View full detailsBrake Disc is a rear vented brake disc, part of the rear braking system. It provides the friction surface the rear brake pads clamp against; inter...
View full detailsFront Brake Pad Set - the friction pads for the front-axle disc brakes. The pads sit in the caliper and are clamped against the brake disc by the c...
View full detailsFront Brake Pad Set for the front axle. Supplied as an axle set of disc brake pads for the front calipers. The pads use a ceramic friction compoun...
View full detailsRear Brake Pad Set for vehicles built with the size 19 front and rear disc and caliper package, supplied as a complete rear axle set - one kit cove...
View full detailsRear Brake Pad Kit for the rear axle. This kit supplies a complete axle set of disc brake pads for both rear calipers. The friction pads clamp the...
View full detailsBrake Disc for the rear axle. This disc is the rotor that the rear caliper clamps to slow the wheel. Sized for the 19-inch brake disc and caliper ...
View full detailsSteering Gear Ball Joint is the articulating joint in the steering linkage that connects the track rod to the steering arm. Its ball-and-socket co...
View full detailsLining Brake Kit /
Yes. Delphi manufactures automotive components that meet strict engineering standards and are widely used in both original equipment and aftermarket applications. Read more about Delphi. OE quality here: https://www.delphiautoparts.com/resource-center/article/delphi-technologies.-oe-quality-guaranteed.
Yes. Delphi suspension and steering components are widely used in vehicle servicing and repair and are trusted by many professional mechanics.
Common Delphi components include ball joints, control arms, steering parts, sensors and braking components.
Yes. Worn suspension or steering components can affect vehicle stability, tyre wear and braking performance.