Collection Scope What this collection covers
The Discovery 3 (internal code L319) was produced from 2004 to 2009 and sold in North America as the LR3. It replaced the Discovery Series II and introduced a new Integrated Body Frame platform shared with the Range Rover Sport L320. In EU markets the dominant engine was the 2.7 TDV6 diesel (engine code 276DT), producing 190 PS. The 4.4 V8 petrol (engine code 448PN) was available as an alternative in lower volumes.
This collection covers replacement parts for the L319 generation. Some parts are shared across generations. Where fitment spans multiple generations, product descriptions state this clearly.
Parts available in this collection include: air suspension components, propshaft and driveline parts, engine service parts, EGR system components, brake system parts, cooling system components, chassis hardware, interior trim fasteners, and drivetrain seals and gaskets.
Engine Variants Engine variants and fitment
Confirming your engine variant before ordering is important, as the 2.7 TDV6 and 4.4 V8 have different requirements for many components including cooling, intake, and drivetrain parts.
The two main configurations in EU-market Discovery 3 vehicles are:
- 2.7 TDV6 diesel (276DT): the primary EU-market engine, introduced with a timing belt service interval. A six-speed ZF automatic or six-speed ZF manual transmission was available depending on specification.
- 4.4 V8 petrol (448PN): fitted to a smaller portion of the EU fleet, with different cooling and intake requirements.
A minority of vehicles received the 4.0 V6 Cologne petrol engine (406PN), available in certain markets including Europe in lower volumes.
If you are unsure which engine or specification your vehicle carries, your VIN (Vehicle Identification Number) is the most reliable reference. Budget Parts offers a parts catalogue reference page and a contact option for fitment queries before ordering.
How to use this collection Use the engine variant, year, and category filters above the product grid to narrow this collection to parts that match your specific Discovery 3.
High-Demand Categories High-demand part categories for the Discovery 3
The following categories account for a consistently high proportion of orders for the L319 generation. This reflects the known wear profile of the model across its age and typical mileage range in the EU fleet.
Air suspension components are among the most ordered parts for the Discovery 3. The Electronic Air Suspension (EAS) system fitted to higher-trim L319 vehicles uses an air compressor, air springs (airbags), and height sensors. These components have a finite service life, and age-related degradation is common in vehicles now 15 to 20 years old. Both full air suspension service kits and individual replacement components are available.
Propshaft and driveline parts are a frequent requirement on higher-mileage Discovery 3 vehicles. The centre bearing, universal joints, and differential output seals are the most commonly replaced driveline components on this generation.
EGR system components including EGR valves, EGR coolers, and related gaskets are a regular service requirement for the 2.7 TDV6 diesel. Intercooler hoses and boost pipe components are also stocked for this engine.
Engine service parts for the 2.7 TDV6 include timing belt kits, water pump components, thermostat and housing assemblies, oil seals, and gasket sets. The 2.7 TDV6 uses a timing belt (not a chain), and this is a scheduled replacement item. The timing belt service guide for this engine is linked in the Technical Guides section below.
Brake system parts including discs, pads, caliper components, and brake line hardware are held in stock for the L319. As a heavy SUV with a kerb weight in the region of 2,400 to 2,540 kg depending on engine and specification, the Discovery 3 places significant demand on its braking system.
Chassis hardware including fasteners, mounting hardware, and suspension arm components rounds out the most frequently ordered categories for this generation.
VIN Guidance Using your VIN to confirm fitment
The Discovery 3 was built across several model year variants and trim grades. Some parts are specific to model year, engine variant, or trim specification. If you have any doubt about fitment, use your VIN before ordering.
Your VIN is a 17-character code found on the driver's door frame (LHD or RHD depending on market variant), on the dashboard visible through the windscreen, and on your vehicle registration document. The VIN encodes the model year, engine code, and build specification. The Budget Parts parts catalogue page provides VIN-based reference support, and the contact page is available for fitment queries.
Technical Guides Technical guides
The following guides provide diagnostic and service depth for the Discovery 3. These are separate from this parts collection and are published on the Budget Parts blog.
2.7 TDV6 timing belt service
The 2.7 TDV6 diesel is the dominant engine in EU-market Discovery 3 vehicles. This guide covers the correct replacement interval, what to replace as part of the job, and what happens when the belt is left beyond its service life. Relevant if you are ordering timing belt components from this collection.
2.7 TDV6 timing belt Driveshaft and propshaft diagnosis
Driveline wear is common on higher-mileage Discovery 3 vehicles. This guide explains how to identify which driveline component is failing before ordering parts, reducing the risk of ordering the wrong component or replacing a part that does not solve the problem.
Land Rover driveshaft problems Cooling system diagnosis
Cooling system faults on the Discovery 3 can originate from several components. This guide helps identify the root cause before parts are ordered, covering thermostat failure, water pump wear, and related cooling circuit components.
Land Rover overheating diagnosis Related Categories Related parts collections
For parts organised by component type rather than by model, the following category collections are relevant to Discovery 3 owners.
Discovery 3 driveshaft and propshaft parts
Centre bearings, universal joints, and driveline components for the L319.
Land Rover driveshaft parts Discovery 3 2.7 TDV6 timing belt kits
Timing belt kits and ancillaries for the 276DT engine.
Land Rover timing belts Does this collection cover the Discovery 4 or only the Discovery 3?
This collection is scoped to the Discovery 3 (L319), produced from 2004 to 2009. The Discovery 4 (2009 to 2016) shares the L319 platform but is a separate generation with different engine options, revised electronics, and updated components. Some parts fit both generations and product listings state this where relevant. For Discovery 4 parts, a separate collection is available.
What engines did the Discovery 3 use?
The primary EU-market engine was the 2.7 TDV6 diesel (engine code 276DT), producing 190 PS. The 4.4 V8 petrol (engine code 448PN) was also available. A small number of vehicles received the 4.0 V6 Cologne petrol. Engine-specific parts such as timing components, cooling parts, and EGR components are labelled by engine fitment in product listings.
Does the 2.7 TDV6 in the Discovery 3 use a timing belt or a timing chain?
The 2.7 TDV6 diesel (276DT) uses a timing belt, not a chain. This is a scheduled replacement item with a defined service interval. Timing belt kits and associated water pump components for the 2.7 TDV6 are available in this collection. The Technical Guides section links to the full service guide for this engine.
How do I confirm which parts fit my specific Discovery 3?
The Discovery 3 was produced across several model years with different trim grades and engine variants. Your 17-character VIN is the most reliable way to confirm fitment. It encodes the model year, engine specification, and build details. The Budget Parts parts catalogue page provides VIN reference support. For specific fitment queries, the contact page is available before you order.
Are Discovery 3 parts in stock in the EU?
Budget Parts is an EU-based Land Rover parts specialist operating from the Netherlands. Current availability for each part is shown on the individual product page. Trade account holders receive correct EU VAT invoicing. Volume and wholesale pricing is available through the wholesale portal for qualifying workshop buyers.
Can I order Discovery 3 parts for trade or workshop use?
Yes. Budget Parts operates a wholesale portal for trade and workshop customers. Account holders receive volume pricing and correct VAT documentation for business purchases. Creating a trade account is available through the account registration link in the site header.
