for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Tow Bar Electrics - a vehicle-specific wiring kit that connects a towing socket into the vehicle's electrical system. The kit provides a 13-pin so...
View full detailsDifferential Guard - Salisbury - Rear for Land Rover Defender 110 and 130 (up to 2002). This zinc-plated steel skid plate bolts beneath the Salisb...
View full detailsFront Axle Support is a structural mounting component for the front axle case (differential housing). It locates and secures the front axle casing...
View full detailsTow Ball & Pin Hitch Assembly for the towing system, mounting to the rear towing bracket. The assembly combines a tow ball for standard ball-c...
View full detailsTowing Pin provides a centre towing and recovery attachment point on the front bumper. The pin mounts at the centre of the bumper to give a fixed ...
View full detailsBumperette - Rear - LH - Black is the left-hand rear bumperette, a corner protection unit mounted at the rear of the chassis. It bolts to the rear...
View full detailsBumperette - Rear - RH for the rear bumper assembly. This right-hand rear bumperette bolts to the outer end of the rear bumper cross-member, provi...
View full detailsRear Door Protection Plate - an exterior protection plate fitted to the rear (tail) door to shield the door skin from abrasion and impact. This ve...
View full detailsProtection Plate Rear Door
Rear Door Protection Plate - an exterior protection plate fitted to the rear (tail) door to shield the door skin from abrasion and impact. This ve...
View full detailsRear Door Protection Plate in chequer (tread-pattern) plate, fitted to the rear end door as exterior body protection. Shields the rear door panel ...
View full detailsTow Bar Wiring Kit (N-Type) for the towing electrical system. This plug-and-play kit provides the 7-pin 12N 'N-type' trailer connection, feeding th...
View full detailsBumper Moulding - the anthracite-finished trim panel that fits to the rear bumper assembly, closing off the towing eye aperture. It locates into t...
View full detailsWireless Winch Remote Control - 12 V wireless control unit for operating an electric winch from a distance. Includes two handheld transmitters and...
View full detailsSide Protector Steps in stainless steel, mounting along the sill below the doors. They provide a step for entry and exit while shielding the lower ...
View full detailsWinch Bumper is a single-piece galvanised steel replacement front bumper with an integral winch mounting, allowing a winch to be carried at the fro...
View full detailsLoadspace Boot Mat is a semi-rigid protective liner for the rear loadspace, shaped to sit on the boot floor and guard the carpet and trim against d...
View full detailsSand Ladders are recovery boards used to regain traction when a vehicle becomes bogged down on soft ground. Positioned under the driven wheels, the...
View full detailsSand Ladders are recovery boards used to regain traction when a vehicle becomes bogged down on soft ground. Positioned under the driven wheels, the...
View full detailsSteering & Sump Guard - Left-Hand Drive is an underbody protection plate that shields the steering linkage and engine sump from impact and debr...
View full detailsRoof Rack Floor Section - a marine plywood load platform for a roof rack. It fits into the companion DA4732 roof rack frame to provide a solid, we...
View full detailsBonnet Protector - a natural-finish aluminium chequer plate panel that shields the top surface of the bonnet against stone chips, scuffs and abrasi...
View full detailsKinetic Recovery Rope - an octoplait nylon rope used to recover a bogged or stuck vehicle. Under load the rope stretches and stores energy, then re...
View full detailsRock Sliders mount along the sills to protect the lower bodywork and chassis from rocks and obstacles during off-road use, and give a bearing point...
View full detailsRear Mud Flap - spray-suppression flap for the rear wheel arch. Mounted behind the rear wheel, it deflects road spray, mud and stone debris thrown...
View full detailsWinch Oil Seal - a rotary shaft oil seal measuring 22.22 mm inner diameter × 38.1 mm outer diameter × 6.35 mm width. Fitted to the winch drive ass...
View full detailsSide Steps are an exterior bolt-on accessory fitted along the lower body beneath the door openings. They provide a raised tread to ease entry and ...
View full detailsWinch Rope Retainer is a nylon webbing device that secures the winch rope to the base of the winch drum. Fitted when the rope is wound on, it reli...
View full detailsWading Kit for the drivetrain and engine breather system, extending the breather points of the axles, gearbox and engine to a higher level. Raisin...
View full detailsRock guards, rock sliders (pair) galvanised. Fits Discovery 1 and Range Rover Classic (except LSE)
Rock Sliders
Differential Guard - a wrap-around steel guard that shields the front or rear differential housing from impact and debris during off-road use. Des...
View full detailsRear Wing Protector - a protective panel fitted over the rear wing to shield the bodywork from scratches, denting and wear during loading and off-r...
View full detailsProtector Top Wing - Series
Rock Guards - exterior body protection that mounts along the lower sill line to shield the sill panels and lower bodywork from impact damage during...
View full detailsFuel Tank Guard - an aluminium underbody skid plate that shields the fuel tank from impact and debris during off-road use. It bolts beneath the rea...
View full detailsSnow chain pair sized for tyres with a 205mm section width on 16-inch rims. Supplied as a pair for a single axle. Provides additional traction on ...
View full detailsSeat Belt Anchorage Frame is a front seat belt mounting bar for Soft Top vehicles, providing secure anchorage points where the open body offers no ...
View full detailsWing Mirror Covers are a pair of chromed upper caps for the exterior door mirror assembly. Each cover fits over the upper section of the existing ...
View full detailsFront Lamp Guards are protective covers that fit over the front headlamp units to shield the lenses from stone chips, flying debris and impact dama...
View full detailsRear Lower Light Guards are protective covers that fit over the lower rear lamp units to shield the lenses from stone chips, flying debris and impa...
View full detailsUpgrade your Range Rover L322 (2002-2012) with these high-quality Stainless Steel Side Tubes, designed to make entering and exiting your vehicle ea...
View full detailsSide Protection Tubes - a pair of tubular side rails in stainless steel that mount along the lower body beneath the doors. They provide a step to ...
View full detailsEnhance the functionality and look of your Range Rover Evoque with these Stainless Steel Side Protection Tubes. Technical Specifications: Mater...
View full detailsSpring Dislocation Cones - Front are fitted inside the front coil springs to prevent spring dislocation under maximum suspension droop. During extr...
View full detailsWinch Bumper - Pro Taper Small Frame is a steel front winch-mounting bumper that replaces the standard front bumper to carry a recovery winch, supp...
View full detailsSide Sill Tread Plate Set - a set of four polished stainless steel tread plates that protect the door sill scuff areas against scratching and wear ...
View full detailsSide Sill Tread Plate Set - stainless steel entry sill protectors. A set of four stainless steel tread plates covering the front and rear door sil...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026