for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Wind Deflector Set - a set of four channel-mounted deflectors for the front and rear door windows. Each deflector locates in the top of the door w...
View full detailsDoor Handle Bowl is the recessed surround that frames the exterior door handle where it sits in the door skin. Finished in chrome as an exterior s...
View full detailsLoadspace Boot Mat protects the loadspace floor from dirt, spills and wear. The semi-rigid mat has an anti-slip surface that holds cargo in place ...
View full detailsDocking station for a quick-release steering wheel swivel lock, providing a fixed stowage point for the lock when it is not fitted to the steering ...
View full detailsRear Mudflap Kit is a pair of rear mudflaps supplied complete with their mounting brackets, carrying the yellow logo. The kit contains two mudflap...
View full detailsFront Mud Flap Pair - standard-pattern front mudflaps in the exterior body protection assembly group. The flaps mount at the trailing edge of the ...
View full detailsFits Range Rover P38 for a perfect cargo area fit Semi-rigid construction with 75mm deep sides to keep spills and dirt contained Durable, high...
View full detailsBoot Liner - a tailored load-space liner for the 110 body, shaped to fit the rear cargo area and protect the boot floor from dirt, moisture and gen...
View full detailsLED Flood Light - a 32W auxiliary work lamp giving a wide flood beam for close-range area illumination, suited to load areas, work sites and revers...
View full detailsLED Light Bar - a 36W dual-row auxiliary driving lamp for mounting on bumpers, roof rails or A-frames to provide additional forward illumination. ...
View full detailsRear Corner Trims - chequer plate style protective trims fitted over the rear body corners to guard the panels against stone chips and abrasion. S...
View full detailsCentre Console Storage Box - a front centre console unit installed between the front seats to provide enclosed stowage. This is the Style 1 design;...
View full detailsMud Flap Brackets - galvanised steel brackets that secure the rear mud flaps to the vehicle, holding each flap behind the wheel to control road spr...
View full detailsRecovery Eye - a steel recovery attachment point used during vehicle recovery. It provides an eye to which a recovery strap or shackle is connected...
View full detailsWaterproof Seat Cover Set for the front seats, supplied as a pair. Tailored to fit over the standard front seats and protect the original upholste...
View full detailsBrushed Stainless Steel Door Thresher E
Rear mudflap assembly for the left-hand side, in the stiff NAS pattern - a rigid moulded flap rather than the flexible rubber type. Mounts behind ...
View full detailsAir Compressor Cap and Filter - a replacement top cap with an integral screw-in air filter for a portable 12V air compressor. The filter cleans the...
View full detailsBumper Top Chequer Plate in natural aluminium finish, supplied as a pair. The plates fit over the top faces of the front bumper, protecting the su...
View full detailsMudflap Kit Front Replacement
Defender Ladder - Rear
Rubber Floor Mat Set - four-piece moulded footwell mat set, covering both front and both rear footwells. Each mat is deep-moulded with a raised pe...
View full detailsXS LED Combo Beam Light
Door Handle Cover Set - chrome-finished covers that fit over the existing exterior door pull handles as a decorative overlay. Supplied as a set.
Drop Plate Strengthener for the towing equipment assembly. It acts as a spacer and strengthener for the towing jaw and the towing jaw/ball fixings...
View full detailsWing Top Protector - a treadplate panel that fits over the front wing top surface, protecting the paintwork from scratches, denting and wear during...
View full detailsUniversal Towing Electrics is a pre-wired trailer wiring kit that adds a towing socket to the vehicle's rear lighting circuit. It comprises a 12N ...
View full detailsMesh Dog Guard a partition panel that mounts against the full-height rear bulkhead to separate the cab from the load area. Fitted to the existing ...
View full detailsDog Guard - 90/110
Front Grille Assembly in a chrome finish - the radiator grille that sits in the front bumper aperture ahead of the cooling pack. The grille locate...
View full detailsRear Rubber Mat Set is a set of drop-in footwell mats that protect the rear floor from dirt, moisture and wear. Moulded to the contour of the rear...
View full detailsWheel Arch Extension Kit is a matched pair of rear wheel arch extensions that widen arch coverage by 30 mm, giving clearance for wider tyres or whe...
View full detailsDog Guard for the rear loadspace, forming a rigid partition between the load area and the passenger compartment. Fabricated from tubular steel wit...
View full detailsLoadspace Mat - moulded rubber mat for the loading compartment floor, part of the interior protection range. Lies over the loadspace floor coverin...
View full detailsQuick-Release Steering Wheel Boss mounts an aftermarket steering wheel onto a 48-spline steering column, forming the interface between the column a...
View full detailsSump Guard is an underbody skid plate that protects the engine sump and undercarriage from impact and debris, forming the front section of the vehi...
View full detailsChequer Plate Kit - a black satin aluminium chequer plate set for exterior body protection. The kit covers the bonnet, wing tops, sills and rear c...
View full detailsFixed Side Steps - a complete kit of body-side steps mounting to the sill and underbody attachment points as part of the exterior accessory install...
View full detailsDog Guard - a load compartment partition separating the loadspace from the passenger cabin. The guard mounts behind the rear seat backs and stops ...
View full detailsTowing Hook Mounting Kit
Side Step Runners – stainless steel tubular side steps, supplied as a pair with an integrated front mud flap. The runners bolt to the sill mountin...
View full detailsAdjustable-Height Towing Bar a rear towing attachment that bolts to the chassis towing points and carries the tow ball or coupling. The drop plate...
View full detailsWinch Bumper is a heavy-duty steel replacement front bumper with an integral winch mounting, allowing a winch to be carried at the front of the veh...
View full detailsSecurity Lock is a swivel locking cover that fits over a quick-release steering wheel boss to prevent the wheel being released and removed by an un...
View full detailsSidestep - Defender (Pair)
Rock Sliders mount along the sills to protect the lower bodywork and chassis from rocks and obstacles during off-road use, and give a bearing point...
View full detailsTow Bar - Flange Tow Ball - a tow bar assembly fitted with a flange-type tow ball, which bolts to the bracket and allows flange-mounted accessories...
View full detailsHalf-Length Rubber Loadspace Mat lines the floor of the luggage compartment. Moulded in rubber with a raised edge, it protects the loadspace floor...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026