for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
FBH Controller (GSM) is a remote control and monitoring module for the Webasto fuel-burning auxiliary heater used on TDV6 diesel applications. It a...
View full detailsElectric Window Kit - Rear Door
Hood Stick Kit - the framework of bows and sticks that forms the skeleton of a canvas soft top (tilt), carrying and tensioning the fabric over the ...
View full detailsPlain Mudflap (No Logo)
Mudflap Assembly - Rear - Mudfla
Dog Guard - a half-height mesh guard that fits across the loadspace to separate it from the passenger cabin, keeping pets or cargo behind the rear ...
View full detailsRear Mudflap - exterior splash guard that mounts behind the rear wheel to deflect mud, water and road debris away from the underbody and following ...
View full detailsSide Step Set - a pair of rubber-topped side steps with a chevron tread surface, mounted along the lower body to provide a foothold when entering a...
View full detailsDog Guard for the Station Wagon, forming a full-height barrier between the rear load area and the passenger cabin to restrain animals or loose carg...
View full detailsAcrylic Front Lamp Guard Set for the headlamp units, supplied as a pair of clear acrylic protectors. Each guard clips over the headlamp without mo...
View full detailsFront Lamp Guard Set for the headlamp units, supplied as a matched pair for the left and right front lamps. Each guard fits over the headlamp to s...
View full detailsWinch Bumper Fitting Kit - the mounting hardware set for installing the DA5621 steel winch bumper. Supplies the fixings needed to attach the bumpe...
View full detailsFront Lamp Guard Set - protective guards that mount over the front headlamp units as part of the vehicle's exterior protection. The moulded guards...
View full detailsRear Mudflap Kit mounts behind the rear wheels at the lower edge of the body, deflecting road spray, mud and stones thrown up by the tyres away fro...
View full detailsSide Steps with Mudflaps are a bolt-on exterior accessory fitted along the lower body sides, supplied as a matched left-and-right pair. Each step ...
View full detailsMudflap Retention Bracket - the mounting bracket that secures the rear mudflap to the underbody. It holds the flap square and rigid behind the whee...
View full detailsRecovery Tracks supplied as a pair - rigid plastic traction boards used to regain grip when a vehicle is bogged down in sand, mud, snow or other so...
View full detailsSpare Wheel Carrier Cable - the replacement cable stay for the swing-away rear-mounted spare wheel carrier. The cable tethers the swing-away carri...
View full detailsSide Step - a fixed running board set that mounts along the lower body to provide a step for entry and exit and to shield the lower sill area. Thi...
View full detailsNAS LED Rear Lamp Kit upgrades the rear exterior lighting to LED lamps in the North American Specification (NAS) style, with coloured lenses. The ...
View full detailsProtect the loading compartment of your Range Rover Evoque (2012-2018, 3 & 5-door) with this high-quality rubber mat. Designed to perfectly fit...
View full detailsLockable Tow Ball Handle Assembly for the detachable tow ball system. It locks the removable tow ball into the receiver to secure it against remov...
View full detailsStainless Steel Door Thresher D
Wheel Arch Chequer Plate - front, left-hand. A Safari-style chequered aluminium protection plate fitted over the front wheel arch. The plate cover...
View full detailsFront Wing Protector - Rear Section, part of the exterior body protection panel set for the front wings. The panel covers the rear portion of the ...
View full detailsWheel Arch Chequer Plate - front, right-hand. A Safari-style chequered aluminium protection plate fitted over the front wheel arch. The plate cove...
View full detailsSingle Roof Bar - a roof-mounted cross bar that provides a load-carrying and mounting point across the vehicle roof. The bar weighs 4 kg and carri...
View full detailsAdhesive Tape is a self-adhesive exterior decal tape, light grey. It is applied to the body as exterior lettering or decal trim.
Loadspace Mat - ribbed rubber drop-in mat for the rear floor of the 7-seat configuration. Protects the rear load floor from dirt, moisture and wea...
View full detailsFiller Plug is a red anodised aluminium replacement filler plug for the radiator and thermostat housing filler points. Machined from anodised alum...
View full detailsLoadspace Mat - moulded rubber luggage-compartment liner. Fits the boot floor to protect the load area from dirt, moisture and wear. The rubber co...
View full detailsTow Hitch for the towing system, rated to a maximum gross towing weight of 3,500 kg. The hitch bolts to the tow bar and carries the tow ball, prov...
View full detailsDecal - TDi - a self-adhesive "TDi" engine decal for the front wing, in black. The decal reproduces the original "TDi" wing marking that identifie...
View full detailsRear Step Tread - Rubber - Tyre Pattern is a replacement rubber top for the folding rear step, moulded with a tyre-tread pattern for grip. It fits...
View full detailsRadiator Muff - Black is a fabric cover that fits over the radiator grille to control airflow through the radiator. Restricting cold air across th...
View full detailsRear Mud Flap Kit - spray-suppression flaps for the rear wheel arches. Mounted behind the rear wheels, the flaps deflect road spray, mud and stone...
View full detailsHawse Fairlead - guides the winch cable into the drum, mounted at the front of the winch. Steel construction. Mounting hole spacing 255 mm; apertu...
View full detailsWaterproof Front Seat Cover Set (Black) - tailored covers for the two front seats. Constructed from hard-wearing woven polyester with a PVC backin...
View full detailsRear Mud Flap Assembly - spray-suppression flaps fitted at the rear wheel arches. Mounted behind each rear wheel, the flaps deflect road spray, mu...
View full detailsWinch Remote Control - Wireless is a 12-volt wireless remote control for operating an electric recovery winch at a distance. It drives the winch i...
View full detailsNumber Plate Lamp - Chrome is the rear licence plate illumination unit within the rear lighting circuit. It mounts above the licence plate at the ...
View full detailsTowing Socket - N-Type for Discovery 2, providing a single-socket electrical connection for trailer lighting. The N-type socket connects to the ve...
View full detailsFront Grille Assembly in a silver grey finish - the centre radiator grille panel of the front-end body assembly. The grille sits in the front bump...
View full detailsService Kit Sticker - adhesive service label, supplied in a pack of 25.
Rubber loadspace mat for the rear loadspace floor, part of the interior protection range. Shaped to the loadspace floor and laid directly over the...
View full detailsMud Flap - a moulded rubber rear mud flap with a ribbed face, hung behind the rear wheel to intercept water, mud and stones thrown up by the tyre. ...
View full detailsRear Mud Flap Pair - standard-pattern rear mudflaps in the exterior body protection assembly group. The flaps mount at the trailing edge of the re...
View full detailsFront Grille Assembly - the radiator grille that sits in the front bumper aperture ahead of the cooling pack. The grille locates on the front bump...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026