for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Roof Rack Side Rail Gasket for the rear roof rack side rail mounting, right-hand side. This gasket seats between the rear roof rack side rail and ...
View full detailsRoof Rack Side Rail Gasket for the front roof rack side rail mounting, right-hand upper position. This gasket seats between the front roof rack si...
View full detailsRoof Rack Side Rail Gasket - the rear sealing gasket for the roof rack side rail, part of the roof rack mounting assembly. It sits between the rea...
View full detailsRoof Rack Side Rail Gasket for the front roof rack side rail mounting, right-hand lower position. This gasket seats between the front roof rack si...
View full detailsClip for exterior body trim and accessory fittings. The clip retains body mouldings, side steps, mudflaps and related exterior trim to the body, p...
View full detailsWheel Centre Cap is the press-fit cap that covers the central hub bore of a factory alloy road wheel, concealing the hub and wheel fixing. Finishe...
View full detailsSpare Wheel Cover - a moulded vinyl cover that fits over an externally-mounted 16" spare wheel to shield the tyre and rim from dirt, moisture and U...
View full detailsSpare Wheel Cover for Discovery 1 and Discovery 2, sized to fit a 255mm-wide tyre on a 16- or 18-inch wheel. The cover has a rigid backing panel a...
View full detailsWheel Centre Cap for the road wheel, fitting into the centre bore of the rim to cover the hub. Finished in silver with a black logo. The cap conce...
View full detailsMulti-Height Tow Bar is a towing assembly for the high-capacity pick-up and crew cab body styles, mounting to the rear of the chassis. The multi-h...
View full detailsHandbrake Cable Bracket that locates and guides the handbrake cable on the Defender 90/110 chassis underside. This bracket mounts to the chassis a...
View full detailsTow Bar Kit - a bolt-on rear towing bracket assembly supplied with wired-in trailer electrics rather than a plug-in socket connection. It provides...
View full detailsTowing Bracket that mounts to the rear chassis crossmember, providing the main tow point for fitting a tow ball or coupling for trailer use.
Body Side Step is a folding side step for the Defender, mounting to the body sill to provide a step for vehicle entry and exit. The step folds fla...
View full detailsRear Step Assembly – Retractable, a folding step mounted at the rear body to give a low-height step for access to the load area and roof. It compr...
View full detailsTow Hook Protective Cap is a cover for the towing eye aperture in the bumper. It closes off the tow hook mounting point when not in use, keeping o...
View full detailsRoof Rack Fitting Kit - the mounting hardware that secures a roof rack system to the vehicle's longitudinal roof rails. It supplies the fixing par...
View full detailsSide step insulator - a moulded pad that sits between the side step mounting bracket and the vehicle body, within the deployable side step mounting...
View full detailsRetainer Clip for the pin of a rotating towing pintle, part of the towing hitch assembly. The clip passes through the drilling in the pintle pin a...
View full detailsTowing lighting board mounted at the rear of the vehicle as part of the towing electrics installation. The board carries stop, tail and direction ...
View full detailsSwitch Assembly - Battery Isolation
Mat - Front Floor
Kit - Mudflap - Rear
Headlamp Guard - Left-Hand - protective guard fitted over the left-hand front headlamp. It shields the headlamp lens from stone chips and debris t...
View full detailsRubber Floor Mat Set - Front for the front footwells, supplied as a matching pair. The mats are moulded in rubber to protect the front floor area a...
View full detailsHolder - Cup
Wiring Harness for the power deployable running board (side step) accessory, part of the lower body guards and shields installation. The harness l...
View full detailsHolder - Cup
Tow Bar Mounting Bracket is a structural component of the towing installation, providing the fixing point that locates and supports the towing elec...
View full detailsTow Bar Fitting Kit
Rear Mudflap Kit mounts at the rear of the vehicle to reduce road spray and protect the lower bodywork and rear window from mud and debris. Intend...
View full detailsRear Mud Flap Pair - standard-pattern rear mudflaps in the exterior body protection assembly group. The flaps mount at the trailing edge of the re...
View full detailsFront Mud Flap Pair - standard-pattern front mudflaps in the exterior body protection assembly group. The flaps mount at the trailing edge of the ...
View full detailsFixed Side Steps, a body-mounted step accessory running along the lower body. Of non-deploying (fixed) design, they provide a solid tread to aid e...
View full detailsDifferential Lock Instruction Label, a self-adhesive label applied to the fuse box cover showing the operating instructions for the differential lo...
View full detailsRear Mudflap Set - Classic pattern, part of the exterior body protection assembly group. The mudflaps mount at the trailing edge of the rear wheel...
View full detailsFront Mud Flap Kit for the front wheel arches. Mounted behind the front wheels, these mud flaps deflect road spray, mud and stone chips thrown up ...
View full detailsFront Mudflap Set - Classic pattern, part of the exterior body protection assembly group. The mudflaps mount at the trailing edge of the front whe...
View full detailsDifferential Lock Instruction Label, a self-adhesive label applied to the fuse box cover showing the operating instructions for the differential lo...
View full detailsBracket - mounting bracket supplied as part of an electrical accessory installation kit. It provides the fixing point that locates and supports th...
View full detailsLockable Retainer Handle for the detachable tow bar system. It secures and locks the removable tow bar neck into the receiver, and is supplied wit...
View full detailsRubber Floor Mat Set - four-piece moulded footwell mat set, covering both front and both rear footwells. Each mat is deep-moulded with a raised pe...
View full detailsMats - Floor - Rubber - Set
Front Fog Lamp Assembly, left-hand side, part of the front lighting circuit. Mounted low in the front bumper, it provides supplementary forward il...
View full detailsFloor Mat Set - carpet contour mats that lie over the fitted floor covering, shaped to follow the footwell contours so they sit flat and stay in po...
View full detailsFloor Mat Set - Rubber for the front and rear footwells, supplied as a set of four black rubber mats. Waterproof and cut to the footwell shape, th...
View full detailsRubber floor contour mat set for the front and second-row footwells, part of the interior protection range. The mats are moulded to the contours o...
View full detailsMats - Floor - Rubber - Set
Collection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026