for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Portable Solar Panel - 100W foldable monocrystalline panel for off-grid and outdoor charging. Two-section, self-supporting design built around mon...
View full detailsLED Shower Awning - vehicle-mounted privacy enclosure for showering or changing, opening to 1m x 1m x 2m. Fold-out arms lock out to support 600D O...
View full detailsCamping Table - fold-out aluminium table for expedition, camping and outdoor use. Aluminium fold-out design carried on sturdy 22mm box-section all...
View full detailsFolding Camping Stool - compact fold-flat stool for camping, motorsport, fishing and general outdoor use. Steel-legged construction standing 42cm ...
View full details270° Awning - wrap-around 2.0m Terradactyl awning that opens around the side and rear of the vehicle. Five triangulated 2.0m aluminium arms fan ou...
View full detailsNumber Plate Mounting Plinth for use with a front winch bumper. Winch bumpers often have no dedicated number plate location, as the fairlead and w...
View full detailsSpot Light Bar mounts auxiliary driving and spot lamps across the front of the vehicle on a conventional, non-winch bumper. Formed from 2.5" diame...
View full detailsLamp Guard Set - a hinged pair of protective guards that fit over the rear lamp units to shield the lenses and bodies from impact, branches and loa...
View full detailsRear Lamp Guard - protective guard that mounts over the rear lamp unit as part of the vehicle's exterior protection. The hinged guard sits over th...
View full detailsFront Mudflap Set mounting behind the front wheels to deflect road spray, mud and stone debris away from the lower body, sills and following traffi...
View full detailsAuxiliary Lamp Switch Facia-mounted switch for the auxiliary driving lamp circuit, part of the interior lighting control electrics. The switch ope...
View full detailsLamp Guard - Rear Bumper Protective guard for a rear bumper lamp, forming part of the exterior lighting protection assembly. The guard mounts over...
View full detailsHalf-Height Dog Guard for the loadspace, mounting behind the rear seats to separate the cargo area from the passenger compartment. The grey mesh p...
View full detailsAdjustable-Height Tow Bar mounting to the rear cross-member to provide the vehicle's towing attachment point. The drop-plate design allows the hit...
View full detailsKIT - STRIPE DECAL STC50061
Fog Lamp Set is a matched pair of rectangular front fog lamps with black housings. The lamps mount above or below the front bumper to improve forw...
View full detailsRoll Cage Eight-point full external/internal bolt-in roll cage, built to the European NAS specification. It mounts at six external points with two ...
View full detailsDriving Lights – a twin pack of Lightforce Lance 140mm round driving lights for auxiliary forward lighting. Each 140mm lamp operates on a 12V supp...
View full details110"" daklengte (2.8 mtr) met zowel full rail als 3/4 rail standaard dak zwart
Rear View Camera supplied with a display monitor - a reversing and parking aid. The camera mounts at the rear of the vehicle and feeds the include...
View full detailsFront Style Bar styled on the 60th Anniversary Defender. An externally-mounted tubular bar fitted across the front of the vehicle as an exterior s...
View full detailsRoll Cage Full internal weld-in roll cage, fitted inside the cab to provide occupant protection. The cage is built from CDS (cold-drawn seamless) ...
View full detailsRoll Cage Six-point full external bolt-in roll cage for the truck cab body configuration, for right-hand drive applications. The cage is built fro...
View full detailsEnhance the safety and performance of your Defender 110 with this 10-point multi-point bolt-in roll cage. Designed with NAS front underwing mounts,...
View full detailsRoll Cage Ten-point full external bolt-in roll cage built to NAS specification for the crew cab / double cab pick-up body configuration, with an in...
View full detailsRoll Cage Internal roll cage built around hoops at the B-post and D-post positions, with external front legs and short stays. The B and D hoops si...
View full detailsHook
Side footstep mounted along the sill, providing a step for entry and exit and for reaching the roof line.
Bumper End Covers fit over the exposed outer ends of the front bumper to protect and finish them. Manufactured from 2mm chequer-plate aluminium, g...
View full detailsFreelander lampguard set 4 pcs STC7960 BFA 3001 LG321
Water Tank 40-litre water storage tank for in-vehicle mounting, shaped to sit in the footwell area behind the front seats. Fitted with two outlets...
View full detailsTyre Pressure Monitoring System is a universal Bluetooth system that reports live tyre pressure and temperature to a smartphone app. Four sensor ca...
View full detailsLuggage Rack mounts on the vehicle roof to carry luggage and equipment, keeping the cabin clear for occupants. It provides a secure platform for st...
View full detailsMudflap Kit - Rear - Black Rear mudflap kit for the lower bodywork, forming part of the underbody protection and trim. The moulded black flaps mou...
View full detailsMat Set Disco
Front Mudflap Kit - Hatton Grey mounts behind the front wheels as part of the vehicle's exterior protection. Each flap hangs at the rear of the fr...
View full detailsSnorkel Head is the 3.5" ram-air intake head that fits to the top of a raised air intake tube, forming the forward-facing scoop that feeds cool, cl...
View full detailsRear Mudflap Kit - Hatton Grey mounts behind the rear wheels as part of the vehicle's exterior protection. Each flap hangs at the rear of the rear...
View full detailsWaterproof Grey One Seat Cover
Rubber Mat Set of 4 RR - P38
Arch Kit - LWB - Set Of 4 is a set of four wheel arch trims for long-wheelbase models, providing one arch for each of the four wheel openings. The...
View full detailsM16 x 50 Bolt for the towing system. This flanged, dacromet-coated bolt secures the towing bracket assembly to the chassis, with the corrosion-resi...
View full detailsTow Ball Washer - a load-bearing washer for the tow ball mounting. It fits beneath the tow ball securing bolts where they pass through the towing ...
View full detailsMudflap Stiffener Bracket for the front mudflap assembly. The bracket mounts behind the front mudflap to hold it rigid and maintain its shape, pre...
View full detailsBadge Tape - a self-adhesive vinyl body tape forming part of the factory exterior decal and trim scheme. Supplied as an 83 cm length, it bonds dir...
View full detailsTapered Front Bumper is a heavy-duty 5mm steel replacement for the standard front bumper. The tapered profile improves the front approach angle. T...
View full detailsChequer Plate Sheet - a 2mm aluminium chequer (tread) plate sheet measuring 125 x 250 cm. Supplied as raw stock for cutting and forming custom bod...
View full detailsThe Hook - Slidetite BA 2950
Collection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026