for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Body Side Sill Finisher with Rear Mudflap - the lower bodyside sill trim incorporating the rear mudflap, fitted to the left-hand side. This finish...
View full detailsDriving Light Wiring Harness - a 12V wiring loom for connecting auxiliary driving lamps to the vehicle's electrical supply.
Grille - Matt Black
Body Side Sill Finisher with Rear Mudflap - the lower bodyside sill trim incorporating the rear mudflap, fitted to the right-hand side. This finis...
View full detailsLogo Tape is a self-adhesive exterior logo decal, black, 27 cm in length. It is applied to the body panel as exterior lettering.
Decal Tailgate Range Rover Mid Silver
V8 Badge in silver lettering on a black background, an exterior identification badge for the front wing denoting the V8 engine. Measures approxima...
View full detailsMud Flap Stay is the steel support bracket that braces a rear mud flap and holds it in position behind the wheel. It fixes the mud flap to the bod...
View full detailsAluminium Gauge Surround Set - a set of four machined aluminium bezels that fit around the instrument gauges as a finished interior trim upgrade. ...
View full detailsTailgate Body Tape - a self-adhesive decal fitted to the tailgate as part of the exterior body trim.
Stowage Cage Shelf
Wind Deflectors - front door window wind deflector set, supplied as a pair. The deflectors fit to the tops of the front door window openings, allo...
View full detailsHydraulic Gas Strut for the swing away spare wheel carrier assembly on the Discovery 3, providing assisted opening and controlled closing of the ca...
View full detailsLED Light Kit is a complete rear LED lamp upgrade set in NAS specification with clear lenses. It replaces the rear halogen lamp cluster with LED u...
View full detailsRaised Air Intake relocates the engine's air induction point from the inner wing up to roof height, feeding the air cleaner through a raised snorke...
View full detailsLight Bar Pedestal Mounting Kit is a mounting kit for the ARB Intensity LED light bar. It allows the light bar to be fitted to the pan of a bull b...
View full detailsStowage Cages convert the inner wing-arch voids in the rear load area into secured storage, reclaiming space that is otherwise dead. Raised over ea...
View full detailsTurbocharger Decal in a silver finish, an identification decal applied to the turbocharger on Tdi diesel engines.
Waterproofing Kit - V8 seals the ignition system of the V8 petrol engine against water and damp. The kit waterproofs the distributor and ignition ...
View full detailsTTI TCB-770 4W Mobile CB Radio for in-vehicle installation. This compact CB transceiver operates on all 40 CEPT channels in the 27 MHz CB band wit...
View full detailsRaised Air Intake relocates the engine air pickup from the standard inner-wing position to roof height. Run up the A-pillar, it draws intake air f...
View full detailsLoad Luggage Carrier - a Mantec-manufactured carrier for stowing luggage and equipment. It provides a dedicated load-carrying platform, expanding ...
View full detailsAluminium Decal - 15cm nameplate for the exterior body. This aluminium nameplate measures 15cm in length and is applied to the exterior body as a ...
View full detailsRear Corner Kit - Black - 110 Defender 07 On
X4000 12V Electric Winch is a compact self-recovery and utility winch for mounting in the load space of a pick-up, on a trailer bed, or on a utilit...
View full detailsLashing Eye - 102 x 95mm - Flush-Mount is a heavy-duty tie-down anchor point designed for flush installation into a load bed or cargo floor. The e...
View full detailsRoof Light Bar is a straight tubular steel mounting bar that attaches to the vehicle's roof rain gutters. The bar features four lamp mounting brac...
View full detailsHard Case Awning Room for the 2.0m x 2.5m hard case LED awning, enclosing the sides of the deployed canopy to form a sheltered room. The room is s...
View full detailsHeadlight anti-theft bracket for the front lamp assembly mounting. The bracket shields the headlight securing tag so it cannot be prised up from t...
View full detailsCan Cooler - an insulated holder that takes a standard beverage can and slows the rate at which its contents warm. Supplied as loose expedition an...
View full detailsNumber Plate Lamp - LED is the rear licence plate illumination unit within the rear lighting circuit. It mounts above the licence plate at the rea...
View full detailsExternal Roll Cage - 6 Point is a full external roll-over protection system that mounts to the outside of the body and braces the cab structure acr...
View full detailsRemote Control - T1000 - replacement remote control for the T1000 portable pulling tool (TF3335). It operates the tool's raise, lower, pull and re...
View full detailsRear Side Window Storage Panels for the load space, supplied as a left- and right-hand pair. The panels fit against the rear side window area of t...
View full detailsWinch Solenoid Pack - the high-current switching assembly for the M12.5s 12V electric winch, housed in the control box on the winch body. The pack...
View full detailsSpare Inflatable Tube for TF1710
LED Driving Lightbar FX500-CB
Storage Bag for webbing tool holder panels, retaining smaller tools and loose items within the panel's webbing loops. External dimensions are 220 ...
View full detailsScrolling LED Indicators - 95mm - Amber are direct-replacement 95mm indicator lamps for the rear lamp positions, operating within the exterior ligh...
View full detailsDouble Jerry Can Holder - roof rack mounted carrier for two 20 litre jerry cans. The holder bolts to the rack platform and retains both cans uprig...
View full detailsFull External Roll Cage - 8 Point - eight-point roll over protection system combining an external cage with an internal B post hoop, chassis mounte...
View full detailsWheel Arch Protector Set - four wheel arch extensions (wheelhouse extensions) forming part of the exterior body protection assembly group. Each pr...
View full detailsScrolling LED Indicators - 73mm - Front and Rear - Smoked - a set of 73mm scrolling indicator lamps with smoked lenses for the front and rear indic...
View full detailsBanner - a Terrafirma-branded printed banner for display use at shows, events, workshops and stockist premises.
Webbing Tool Holder Panel - MOLLE-pattern webbing panel that turns the inside of a small storage box lid into organised tool stowage. The canvas p...
View full detailsChequer Plate - Rear Cross Member - Silver 3 mm five-bar anodised aluminium chequer plate that covers the face of the rear cross member, protecting...
View full detailsTow Bar Electrics Kit - the 13-pin electrical interface between the vehicle and a towed trailer or caravan, forming the electrical half of the tow ...
View full detailsLED Driving Lightbar SX180-SP
Collection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026