for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Side Sills Pair - Silver - 110 S Wagon
Halo & Bar LED Light Kit - 73mm with 95mm Fog and Reverse - Clear - a complete front and rear exterior lighting kit built around the 73mm lamp ...
View full detailsFixed Side Steps - a pair of body-side access steps that mount to the lower body at the sill on dedicated mounting brackets. The steps give a fixe...
View full detailsHeadlamp Guards for the front lighting assembly, supplied as a pair covering the left- and right-hand headlamps. The guards locate over the headla...
View full detailsSingle Jerry Can Holder - roof rack mounted carrier for one 20 litre jerry can. The holder bolts to the rack platform and retains the can upright ...
View full detailsFixed swan neck towbar kit for the rear towing mounting points on the chassis. The swan neck design combines the neck and tow ball into a single c...
View full details18" Single-Row LED Light Bar - an auxiliary forward-facing light bar for roof, A-bar or bumper mounting. Sixteen 10W LEDs sit in a single row behi...
View full detailsStay dry in style with the Range Rover Automatic Golf Umbrella from the Land Rover Gear collection. - Spring-loaded automatic opening mechanism fo...
View full detailsHi-Lift Jack - X-Treme - 48 in - all-cast high-lift jack on a 48 in (122 cm) standard bar, used for lifting, winching, clamping and spreading durin...
View full detailsShort Frame Strap, 50 mm wide and 450 mm long, rated at 5,000 kg. It creates a winching or recovery point on a roll cage bar, chassis member or sim...
View full detailsHeavy Duty Storage Box - Large - 160 litre load-carrying box for equipment stowage, used in the load area or mounted externally on a roof rack. Mo...
View full detailsSwivel Winch Hook is the replacement rope-end hook for the T1000 hand pulling tool, and forms the connection point for straps, shackles and recover...
View full detailsExtreme Rear Body Corners - Pair - 90
Tow Bar Kit - fixed flange-type towing bracket for the rear chassis mounting points. The bracket bolts to the vehicle's designated rear towing att...
View full detailsLED Driving Round MX260-CB - Twin Pack
LED Driving Light Bar - 1000 mm auxiliary light bar with a combination beam covering both the near and far field. 36 high-performance LEDs produce...
View full detailsFuel Filler Surround Plate - a chequer plate panel framing the fuel filler aperture in the rear body side, within the exterior body protection asse...
View full detailsExtreme Rear Body Corners - Pair - 110
Wing Top Protectors - chequer plate covers for the upper surfaces of the front wings, within the exterior body protection assembly group. The wing...
View full detailsFixed Side Steps - body-mounted running boards in the exterior styling and access group. The steps give an intermediate foothold for entry to and ...
View full detailsHard Case LED Awning - 2.5m x 2.5m, a vehicle-mounted roll-out awning housed in a black powder-coated aluminium hard case. The grey 400D ripstop c...
View full detailsHi-Lift Jack Mounting Kit - bumper and flat-surface mount for stowing a high-lift jack on the vehicle. The jack is clamped against the mounting su...
View full detailsHoodie, size XX-Large. Double-fabric hood with a contrast inner, and a kangaroo pouch pocket with a hidden opening for an earphone cord feed plus ...
View full detailsTow Bar Bracket - Flange Ball
Fuel Tank Guard in 6 mm alloy - underbody protection panel for the fuel tank. The fuel tank sits low under the rear overhang, one of the most expo...
View full detailsRear Door Antenna and Work Light Mounts, supplied as a pair. The brackets locate in the gap alongside the rear door and provide a mounting point a...
View full detailsLED Driving Lightbar SX300-CB
Rear Step Tow Bar with 2" Receiver Hitch - a combined rear step, towing bracket and receiver hitch that bolts to the rear cross member as a single ...
View full detailsDouble can mounting bracket with an integral triangular-pattern lock, for securing two flat-sided fuel or water cans to a flat mounting surface. T...
View full detailsTerradactyl Awning Pole - a single replacement pole for the Terrafirma 2.5 m 270-degree Terradactyl awning (TF1704). The Terradactyl is a side-mou...
View full detailsRear Corner Kit - Silver - 110 - Pre-07
Quick Strap - a polyester hook-and-loop strap for securing luggage, equipment and loose cabling in or on the vehicle. 600 mm long by 25 mm wide. T...
View full detailsNeoprene Bottle Carrier - an insulated neoprene sleeve that holds a drinks bottle and slows heat transfer to its contents. Supplied as loose exped...
View full detailsLED Driving Lightbar FX500-SP
Wading Kit - 2.4 Puma
LED puddle lamp pair for door-mounted courtesy lighting. Each lamp carries the Land Rover logo within the LED lens and is wired to switch with the...
View full detailsScrolling LED Indicators - 95mm - Rear - Clear - a set of 95mm scrolling indicator lamps for the rear indicator positions in the exterior lighting ...
View full detailsExtended Winch Power Cables - 25mm² battery-to-winch leads with an in-line isolator switch, forming the high-current supply side of the winch elect...
View full detailsSpare Wheel Cover, semi-rigid moulded construction, matt black. The cover fits over the rear-mounted spare wheel and holds its own shape rather th...
View full detailsAir conditioning front grille surround in matt black - the front-end panel that spans the area between the headlamp apertures and carries the front...
View full detailsRound LED work lamp from the LEDriving Value (VX) range, using a spot beam pattern. Supplied as a matched pair. A spot reflector focuses the outpu...
View full detailsSingle aluminium clamp set - roll-cage accessory mount used to fix equipment such as a roof rack, snorkel or aerial to external cage tubing. The c...
View full detailsSecurity Cubby Box - steel, black. Lockable centre console storage box fitted between the front seats. Powder-coated steel construction with a loc...
View full detailsOff-Road Jack Base is a wide-footprint base for the hydraulic climbing jack (TF3370), spreading the jack load over a larger contact area. The stan...
View full detailsSet Split Rear Seat Covers
Inclinometer - dash-mounted gauge showing the angle of climb, the angle of descent and the angle of side slope while the vehicle is driven off-road...
View full detailsWaterproof Seat Covers - universal-fit covers supplied as a pair for the front seats. Made from polyester with an EVA waterproof layer, the covers...
View full detailsUndertray
Collection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026