for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Tow Hook Cover is a protective cover for the 50mm tow hook. It fits over the towing hook to protect it when not in use and to give a finished appe...
View full detailsARB Track Shelter Hybrid Walls (Series II) - a two-panel wall set for the ARB Track Shelter. The pack contains two 2000 x 3000mm hybrid wall panel...
View full detailsAwning is a 2000mm x 2500mm side awning that mounts to a roof rack or awning brackets and extends out to provide shade and weather cover, with an i...
View full detailsARB Awning W Light 2500 x 2500
Awning Bracket mounts an awning to a vehicle's roof bars, with welded gussets that add strength for off-road and extreme-duty use. The 50mm-wide b...
View full detailsAwning Alcove — an enclosure that attaches to a 2.5m (2500mm) vehicle awning to create a fully walled, weatherproof room alongside the vehicle. It...
View full detailsRear Ladder Extension - an add-on section that extends a rear-mounted access ladder to give additional reach for access to the roof or roof rack. ...
View full detailsTrailer Electrics - 13-Pin connect the towing vehicle's lighting and power circuits to a 13-pin trailer socket. Through the single 13-pin connecto...
View full detailsTrailer Electrics – 13-Pin provides the 13-pin towing electrical connection, supplying power and signal from the vehicle wiring to a trailer or tow...
View full detailsARB Camper Tumbler is an insulated drinking tumbler designed for use on camping trips and off-road adventures. The inner is constructed from 304 s...
View full detailsRoof Tent Bracket - a mounting bracket for securing a roof tent to a vehicle's roof rack or load rails. Provides a fixed attachment point for roof...
View full detailsTow Ball & Pin is a towing coupling component that mounts to the tow bracket or drop plate. The ball provides the coupling point onto which a ...
View full detailsARB Baserack Aux 2.8 20W
BASE Rack T-Slot Adaptor - supplied as a pair. Allows T-slot compatible accessories to be mounted to the ARB BASE Rack modular roof rack system. Th...
View full detailsMultilock Plug - For Geasr2
Pump-Up Kit - US Standard fittings, High Temperature, Version 2. A portable tyre inflation accessory kit rated to 150 psi for use with ARB on-board...
View full detailsDifferential Breather Kit for venting pressure build-up from drivetrain assemblies, including differentials, the transmission, and the transfer cas...
View full detailsAir Locker Bulkhead Kit - 5mm to 3.5mm, O-Ring Type. This fitting kit provides the hardware required to pass the pneumatic airline through the diff...
View full detailsARB Pinnacle Camp Chair
ARB Base Camp Chair
ARB Stretcher Quick Fold
ARB Compact Directors High/B Directors Chair
Cargo Organiser in heavy-duty PVC with a clear top, for storing and separating loose items in the load space. The organiser has rubber grip feet t...
View full detailsARB Cooler Bag - Series II
Snorkel - a raised air intake that relocates the engine's air inlet from the standard wing position up to roof height, drawing air from a higher, c...
View full detailsSide Steps - a matched left- and right-hand pair of tubular side runners that bolt to the sill and chassis mounting points, forming a continuous no...
View full detailsThermostat Kit for Electric Fan Kenlowe
Towing Bracket Slider Lock Pin is the pin that locks the vertical slider of a Dixon Bate adjustable-height towing bracket at the selected height. ...
View full detailsSide Steps - a matched left- and right-hand pair of fixed tubular side runners that bolt to the sill and chassis mounting points, forming a continu...
View full detailsFront Winch Bumper is a steel front bumper that replaces the standard front bumper to carry a recovery winch. It incorporates integral recovery ey...
View full detailsFitting Kit for TF1040
8 Driving Lamps In Black
Rock Sliders with Tree Bars - Heavy Duty - chassis-mounted side protection for the sills and lower body, supplied as a pair. This heavy-duty versi...
View full detailsRaised Air Intake Fitting Kit - fitting hardware for the Terrafirma raised air intake, supplied separately from the intake itself. The raised air ...
View full detailsSoft Shackle - Heavy Duty - synthetic rope shackle for the recovery rigging kit, connecting a winch hook, strap or vehicle recovery point in place ...
View full detailsFitting Kit for Pacet Fan
Bump Stop Tube - Weld On - Short is the short universal weld-on mounting tube for the TF140 hydraulic bump stop. It is welded to the chassis to ho...
View full detailsBump Stop Spacer sets the clearance between the axle and the TF140 hydraulic bump stop. The spacer adjusts the gap at the bump stop contact face s...
View full detailsEyebrow Moulding
Roof Rack Fitting Kit - the mounting hardware required to fit the tubular roof rack to the vehicle.
Front Winch Bumper replaces the standard front bumper with a heavy-duty steel structure that integrates a recovery winch mounting and swivel recove...
View full detailsWinch Spare Wheel Including Anti-Theft
Plate - 2" Receiver Drop for TF876 877
Safari Door Glazed
Rubber Mat
Mud Flap Kit - Front is a set of two front mud flaps that shield the lower body, sills and paintwork from stones, spray and mud thrown up by the fr...
View full detailsRear Wing Protector in aluminium chequer plate, guarding the rear wing top and corner - one of the most exposed panels on the body. Fits over the ...
View full detailsTow Bar Electrics with 13-pin socket for the Freelander 2 tow bar system. This wiring kit provides a 13-pin trailer electrical connection, supplyi...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026