for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Hand Throttle Cable is the secondary throttle control cable, operated by a hand control rather than the accelerator pedal. It holds the throttle l...
View full detailsTrailer Plug - a 7-pin towing connector that links the towing vehicle's electrical circuit to a trailer or caravan. It carries the supply for the t...
View full detailsAlloy Wheel, 16 x 7 inch, finished in gloss black. The wheel has a positive offset of ET+11 (11 mm) and a rated load capacity of 1,400 kg per whee...
View full detailsBow Shackle - 1" Pin - CE Approved for use in 4x4 recovery applications. This D-bow shackle features a 1" (25.4 mm) screw pin and is CE marked to ...
View full detailsSeat Heater Pad - Single - Seat Base Only by Exmoor Trim, for the Defender heated seat system on vehicles from 2000 onwards. This is the base pad ...
View full detailsRear Step Bumpers - a pair of skeleton-style rear corner bumperettes that bolt to the rear cross member. Each corner is built from mandrel-formed ...
View full detailsElectronic Fan Conversion Kit for the cooling system. It replaces the engine-driven viscous fan with a thermostatically controlled electric suction...
View full detailsDoor strengthening brackets for the rear door, reinforcing the door frame where a rear-mounted spare wheel carrier is bolted on. The brackets stif...
View full detailsRadiator Grille - Santorini Black - Front for the front body panel and front-end cooling assembly. The grille sits in the front panel ahead of the ...
View full detailsImprove your driving comfort with this high-quality wind deflector kit, custom-designed for the Land Rover Freelander 2. These deflectors help redu...
View full detailsProtect your Land Rover Discovery 4's front seats with this premium waterproof seat cover set, designed to fit vehicles with side airbags. Made fro...
View full detailsToastie Maker is a cast iron toasted-sandwich press for cooking over the coals of an open fire or a portable burner. It is built from two hinged c...
View full detailsShock absorber rear Pro-Comp gas 0-25 mm (+1")
Electric Winch is a 12V recovery winch for off-road and utility use, mounting to the vehicle's winch plate or bumper. The M12.5S develops a 12,500...
View full detailsFront Lamp Guards - protective guards that fit over the front lamps to shield the lenses from stones, branches and impact damage. The guards are hi...
View full detailsUpgrade your vehicle's lighting with these 8-inch black halogen driving lights. High power 100W lamps with universal fitting, plastic stone guards,...
View full detailsChecker Plate - Station Wagon - Rear Lower
Upgrade your Range Rover Sport (2010-2022) and Range Rover (2010-2023) with EBC Yellowstuff performance front brake pads, designed for heavy-duty b...
View full detailsBonnet Stay 12 CM & Holder 2pcs Blister
Polyurethane bush kit RRclassic up to '86
JATE Ring Recovery Points - heavy-duty steel rings that replace the original chassis lashing eyes to provide rated vehicle recovery points. The JA...
View full detailsRaised Air Intake relocates the engine's induction intake point from the inner wing up to roof-line height, drawing intake air from above the bonne...
View full detailsTubular Winch Bumper with A-Bar with Air Con for Terra Firma - Defender
Expedition Awning - a 2.5m vehicle-mounted awning providing quick shade and shelter along the side or rear of the vehicle. The grey 400D water-res...
View full detailsThe ultimate diagnostic tool for DIY use offering functionality previously only available in equipment many times more expensive. Standard diagnos...
View full detailsRear Drawer System Push Lock From - Defender 90 HD
Roof Rack - a full-length roof rack in heat-treated aluminium extrusion, giving a low-profile, low-noise platform. A groove (slot) system runs alo...
View full detailsRoof Rack - a tubular roof rack made from CNC-bent, laser-notched steel tube, finished in satin black powder coat. It is designed to fit vehicles ...
View full detailsAlloy Expedition Roof Rack for the Land Rover Defender 90. This aluminium alloy roof rack measures 1.8 x 1.4 m and weighs approximately 35 kg. A c...
View full detailsTree Strap - 5 m x 80 mm - 12000 kg - winch anchor strap for the recovery equipment set. 5 m long, 80 mm wide, rated to 12,000 kg, with reinforced ...
View full detailsPanel - 8 Way Switch System From
Extreme Shackle From
Bow Shackle connects recovery straps, ropes and winch lines to a rated recovery point during vehicle recovery. Bow (anchor) form with a threaded 2...
View full detailsSoft Shackle connects recovery straps, ropes and winch lines to a recovery point, serving as a lightweight synthetic alternative to a steel bow sha...
View full detailsShock Absorber Boots are protective covers that fit over the shock absorber body to shield the shaft and seal from mud, grit and debris. Supplied ...
View full detailsLED Work Lamp rated at 50W with a red rim, an auxiliary lighting unit for vehicle-mounted use. It provides high-output LED illumination for work a...
View full detailsSpare Wheel Cover is a rigid cover that fits over an externally mounted spare wheel. Moulded in hard plastic with a gloss black finish, it shields...
View full detailsSpare Wheel Cover - hard-shell cover for a rear-mounted external spare wheel. Sized for a 17-inch wheel, the rigid moulded shell shields the spare...
View full detailsSteering Wheel Boss - the mounting hub that adapts an aftermarket steering wheel to the steering column splines. Compatible with the BA 150 and BA...
View full details3 man seat Techno Exmoor trim EX4188 EXT006-TC
Raised Air Intake (Snorkel) - relocates the engine air intake from the inner wing up to roof height, drawing induction air from above the bonnet li...
View full detailsAdjustable Tow Hitch STC8060AB BA186
Weathershield - Rear Door - a pair of window wind deflectors for the rear door window openings. The in-channel design allows the rear side windows...
View full detailsWeathershield is a front door wind and rain deflector, supplied as a pair. Each shield mounts along the top of the door window aperture and deflec...
View full detailsWeathershield - a set of window wind deflectors that mount above the door window openings. The in-channel design allows the side windows to be lef...
View full detailsWaterproof Seat Cover Set for the front seats, supplied as a pair. Tailored to fit over the standard front seats and protect the original upholste...
View full detailsWaterproof Rear Seat Cover Set (Black) - tailored covers for the 60/40 split rear bench seat. Manufactured from hard-wearing woven polyester with ...
View full detailsWaterproof Rear Seat Cover Set (Grey) - tailored covers for the 60/40 split rear bench seat. Manufactured from hard-wearing woven polyester with a...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026