for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Towbar Socket, the 12N (ISO 1724) seven-pin trailer electrical socket. It mounts at the rear towing point and feeds the trailer or caravan road-lig...
View full detailsTowbar Harness for the vehicle towing electrical circuit. It connects the trailer towing socket into the vehicle wiring, providing the electrical ...
View full detailsTowbar assembly Defender 90 XA onwards
Fixed Towbar Assembly - rear towing equipment. This fixed (non-detachable) towbar bolts to the rear chassis members to provide a permanent towing ...
View full detailsEnhance your Land Rover Defender's off-road capability with the Terrafirma Swing Away Spare Wheel Carrier, designed for Defender 90 and 110 Station...
View full details8" Spotlight Kit is a pair of 8-inch 55W halogen auxiliary driving lamps supplied with a wiring kit for installation. The lamps provide additional...
View full detailsFront Spring - +50mm - Off-Road - Pair is a pair of front coil springs for the front suspension, wound to a raised free length that lifts the front...
View full detailsSpotlight Bar - Without Lights is a roof-mounted bar for carrying auxiliary driving and spot lamps. It fixes across the front of the roof on four ...
View full detailsRange Rover P38 Tow kit with electrics
Cup Holder is a fold-away drinks holder for the vehicle interior. The holder folds flat against its base when not in use and extends to receive a ...
View full detailsFront Seat Cover Set (Sand) - tailored covers for both front seats, including headrest and armrest covers. Constructed from hard-wearing woven pol...
View full detailsFront Coil Springs for the front suspension, raising ride height by approximately 50mm over standard. Supplied as a pair. The raised height increa...
View full detailsWaterproof Seat Cover Set for the front seats, supplied as a pair. Tailored to fit over the standard front seats and protect the original upholste...
View full detailsBattery Carrier is the mounting tray that holds and locates the battery, supporting it and retaining it against movement and vibration. It forms t...
View full detailsFront A-Bar for the front of the vehicle, non air-conditioning specification. The A-bar mounts across the front of the vehicle to provide frontal ...
View full detailsSpotlight - a 5 inch auxiliary driving lamp for supplementary forward lighting. Typically mounted to a bull bar, A-frame or roof rack, it projects...
View full detailsJack Rack. A mounting rack that stows and secures a jack to the vehicle, holding it firmly in place for transport.
Dog guard Range Rover L322
Rear Light Guards are protective covers that fit over the rear lamp clusters to shield the lenses from stone chips, flying debris and impact damage...
View full detailsFront Lamp Guards are protective covers that fit over the front lamp units to shield the lenses from stone chips, flying debris and impact damage d...
View full detailsTow Bar Electrics Kit - a vehicle-specific wiring kit that connects a tow bar's electrical socket into the vehicle's wiring. The kit provides a 13...
View full detailsFridge Protection Jacket for the Terrafirma 45-litre portable fridge freezer (TFFR01). A snug-fitting insulated cover that fits over the unit to a...
View full detailsSteering Guard - an alloy underbody guard that protects the steering linkage and the front of the chassis from impact and debris during off-road us...
View full detailsDifferential Guard - a bolt-on guard that protects the rear differential housing of the Salisbury axle from impact damage during off-road use. The...
View full detailsGearbox Guard - an aluminium underbody skid plate that shields the gearbox from impact damage during off-road use. Manufactured from aluminium for...
View full detailsGearbox Guard - a steel underbody skid plate that shields the gearbox from impact damage during off-road use. Manufactured from steel, it bolts be...
View full detailsTransmission Guard - an aluminium underbody skid plate that shields the gearbox and transfer box from impact damage during off-road use. Manufactu...
View full detailsTransmission Guard - a steel underbody skid plate that shields the gearbox and transfer box from impact damage during off-road use. Manufactured f...
View full detailsFitment: Defender 110 &: 130 the Wolf or P38 type axle (short nose diff) 2002 on
Fitment: Defender van 1994 tot 2007 Discovery 1 van 1989 tot 1994 Range rover Classic
Terrafirma alloy fuel tank guard 110/130 98-
Terrafirma diff guard 90/110/130/D1/RRCFront for RHD & LHD vehicles
Rock Sliders - bolt-on side protection bars that run along the lower body beneath the doors, sized for the 130-inch wheelbase. The sliders mount t...
View full detailsRock Sliders with Tree Bars for the Land Rover Defender 130. Constructed from steel box section with a black powder coat finish, these sliders bol...
View full detailsRock Sliders - bolt-on side protection bars that run along the lower body beneath the doors, sized for the 110-inch wheelbase. The sliders mount t...
View full detailsTerrafirma rock sliders with tree bars Discovery II Extra verzendkosten!
Rock Sliders with Tree Bars - bolt-on side protection bars that run along the lower body beneath the doors, sized for the 90-inch wheelbase. The s...
View full detailsKinetic Recovery Rope, 9 m long and 22 mm in diameter, rated at 13 tonnes. The rope recovers a stuck vehicle by stretching under load: it stores e...
View full detailsWading Kit with 4-Into-1 Connector for the axle and transmission breather circuit. The axle, gearbox and transfer casings vent to atmosphere throu...
View full detailsTerrafirma discrete winch mount Discovery 3
Discrete Winch Mount mounts a recovery winch behind the standard front bumper, allowing a winch to be carried without fitting a dedicated winch bum...
View full detailsWinch Bumper - Pro Taper Large Frame is a steel front winch-mounting bumper that replaces the standard front bumper to carry a recovery winch, supp...
View full detailsFront Winch Bumper is a steel front bumper that replaces the standard front bumper to carry a recovery winch. It incorporates integral recovery ey...
View full detailsRear Lamp Guard Set is a pair of protective guards for the rear lamp units. The guards fit over the rear light clusters to shield the lenses from ...
View full detailsTow Bar Wiring Kit wires the towing electrical circuit to a 12N 7-pin single socket. It connects the vehicle road-lighting circuit through to the ...
View full detailsFog Guard Switch for the rear fog lamp circuit. Mounted in the dashboard, this switch turns the rear fog guard lamp on and off.
Bumper Protection Bar - front underside protection bar fitted to the front bumper. The bar mounts beneath the front bumper to shield the underbody...
View full detailsTow Hitch - NATO Pintle is a rotating military-pattern towing hook that mounts directly through the rear crossmember. The pintle rotates to allow ...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026