for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Rocksliders Barbarian - Defender 130
Winch Bumper - Air-Conditioning Compatible - a heavy-duty front replacement bumper with an integrated winch mounting cradle. It is profiled to ret...
View full detailsLoad Area Protection - a protective covering for the rear load area that shields the load floor from abrasion and impact. It takes the wear of car...
View full detailsRear Wing Protector - an exterior body protection panel fitted over the top surface of the rear wing. It shields the wing bodywork from scuffing, ...
View full detailsSill Protector is an aluminium protective panel for the body sill (rocker) beneath the doors. It fits over the sill to shield it from stone chips,...
View full detailsSill Protector - chequer plate panel set for the outer sill panels, part of the exterior body protection group. The plates mount along the outer s...
View full detailsRear Door Protection Plate mounts on the exterior of the rear door to shield the panel from stone chips, scuffs and impact damage during loading an...
View full detailsSteering guard Series LHD & RHD
Sill Protector in aluminium, fitted over the outer sill panel below the door apertures to shield the original sill from stone chips, mud abrasion a...
View full detailsCover roof rack slat black LH
Roof Rack Slat Cover in black, for the right-hand side roof rail. This trim cap fits over the roof rail slat channel, concealing the rack mounting...
View full detailsTow Hook Cover for the front bumper assembly. This is the removable cover that conceals the threaded towing-eye aperture in the front bumper. It c...
View full detailsRear Lamp Guards fit over the rear lamps to protect the lenses from impact and debris. Supplied as a guard set.
Headlamp Guards fit over the front headlamps to protect the lenses from stone chips and impact damage. Supplied as a front guard set.
Rear Step Assembly – Retractable, a folding step mounted at the rear body to give a low-height step for access to the load area and roof. It compr...
View full detailsRear Seat Protection Cover in Sand, a waterproof tailored cover that fits over the rear bench to shield the upholstery. It guards the seat cushion...
View full detailsSteel Snorkel Kit (raised air intake) from the Mantec range, forming part of the engine air intake system. Relocates the air intake from the stand...
View full detailsLumbar Support is a pneumatic, air-adjustable lumbar support fitted within the seat back. Inflating and deflating the support varies the firmness ...
View full detailsLoadspace protector 6"" deep sides. Semi-rigid Disco 3 / 4
Towing Eye Cover for the rear bumper, finished in anthracite black. The cover fits over the rear bumper towing eye aperture to complete the bumper...
View full detailsTowing Eye Cover - an anthracite, textured-finish trim cover for the lower front bumper. It clips into the bumper to conceal the front towing-eye r...
View full detailsElectric Winch, 12V, for light vehicle recovery, trailer and utility use. Rated for a 2,000 lb (907 kg) single-line pull. Driven by a 1.0 kW (1.5 ...
View full detailsWinch Rope - 11mm synthetic rope for recovery winches, a direct replacement for steel winch cable. The rope is constructed from 12-strand Dyneema ...
View full detailsDog Guard Divider is a vertical divider that splits the loadspace into two compartments behind the dog guard. It fits the Travall dog guard system...
View full detailsRoof Access Ladder - a bolt-on ladder for reaching the roof and roof rack, mounted on the left-hand side of the body. It clamps to the rain gutter...
View full detailsUpgrade your Range Rover P38 with this heavy-duty Tow Bracket Kit, designed for secure and reliable towing. This kit includes the necessary bracket...
View full detailsTow Hitch Locking Pin (R-Clip) is the spring-steel retaining clip that secures the tow pin in an adjustable tow hitch. It pushes through the hole i...
View full detailsProtect your Land Rover Discovery 2 with these heavy-duty Rock & Tree Sliders, designed to shield your sills and lower body panels from off-roa...
View full detailsFixed Swan Neck Tow Ball Kit - a European-style fixed towing bracket with an integral swan-neck tow ball, mounting to the rear of the vehicle to pr...
View full detailsDog Guard - a rear load-area divider that separates the boot from the passenger cabin, retaining a dog or luggage behind the rear seats during tran...
View full detailsGearbox Guard is an underbody protection plate that mounts beneath the gearbox and transfer box, bolting to the chassis. It shields the gearbox an...
View full detailsFuel Cooler Guard is a bolt-on protective guard that shields the fuel cooler from impact and debris. Mounted over the fuel cooler beneath the vehi...
View full detailsFuel Tank Guard - an underbody protection plate that bolts beneath the fuel tank. It shields the tank from impact and abrasion by rocks, ruts and ...
View full detailsTow Rope - a vehicle recovery rope for towing or recovering a stranded vehicle. 4.5 m length, rated to 10 tonnes.
Winch Solenoid - 12V is a 12-volt solenoid for the electrical control circuit of an electric recovery winch. The solenoid acts as a high-current c...
View full detailsWading Kit for the Td5 engine, part of the driveline breather system. The kit uses extended breather pipes to raise the breather points on the axle...
View full detailsSill Protector Pair - exterior body protection panels that fit along the lower sill (rocker) sections beneath the doors, formed from 2mm aluminium....
View full detailsSill Protector is an aluminium 5-bar chequer plate guard that protects the sill panel beneath the doors from stone chips, scuffs and impact damage....
View full detailsWing Protector is a 3mm aluminium chequer plate that protects the top of the rear wing from scuffs, dents and loading damage. It covers the upper ...
View full detailsLamp Guard Set protects the exterior lamp units from impact damage, fitting over each lens to shield it from knocks by branches, debris and shiftin...
View full detailsWing Top Protector, a 3mm black plate that mounts across the top of the front wing to shield the panel from scuffs, tool marks and load damage. Su...
View full detailsRock Sliders - bolt-on sill protection bars that run along the lower body between the wheel arches, shielding the sills and lower chassis edge from...
View full detailsRear Lamp Guard protects the rear lamp cluster from impact and debris damage. It mounts over the rear lamp unit to shield the lens and housing aga...
View full detailsRear Lamp Guard protects the rear lamp cluster from impact and debris damage. It mounts over the rear lamp unit to shield the lens and housing aga...
View full detailsDog Guard Kit installs behind the rear seats to separate the load area from the passenger cabin, keeping pets and shifting luggage out of the occup...
View full detailsRear Lamp Guards - a pair of steel guards fitted over the rear lamp assemblies to protect the lenses and lamp bodies from stone chips, branch strik...
View full detailsRear Lamp Guards - a set of four steel guards fitted over the rear lamp assemblies to protect the lenses and lamp bodies from stone chips, branch s...
View full detailsSoft Top Finisher - LH is the left-hand rear bodyside capping fitted to soft-top configurations, finishing the upper edge of the rear bodyside pane...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026