for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Rear Side Window Storage Panels for the load space, supplied as a left- and right-hand pair. The panels fit against the rear side window area of t...
View full detailsCompressor guard for the air suspension system, part of the underbody protection group. The guard shields the air suspension compressor and its mo...
View full detailsXL Security Wheel Clamp - an anti-theft device that locks onto a fitted road wheel to immobilise the vehicle. Sized for oversized off-road wheel a...
View full detailsRear Access Ladder - a bolt-on ladder for reaching the roof and any roof rack or roof tent, mounting to the rear of the body on the left-hand side....
View full detailsChequer Plate Wing Tops fitted over the top surface of the front wings, providing a protective and decorative aluminium covering for the wing panel...
View full detailsFixed Side Steps - body-mounted running boards in the exterior styling and access group. The steps give an intermediate foothold for entry to and ...
View full detailsFront Floor Mats - moulded rubber mats supplied as a pair for the driver and passenger footwells. The mats are shaped to the contours of the footw...
View full detailsTrack Rod Guard is a bolt-on guard that shields the steering track rod within the front steering linkage. The track rod runs low and exposed acros...
View full detailsSnorkel Mount is a 3" stainless steel raised air intake that routes engine induction air to a high mounting point, protecting the engine during dee...
View full detailsRock Sliders with Tree Bars - Heavy Duty - chassis-mounted side protection for the sills and lower body, supplied as a pair. This heavy-duty versi...
View full detailsHook & Loop Fastening Strap for securing and bundling loose items within the vehicle interior, cargo area, or workshop. The strap wraps around ...
View full detailsSnorkel Head is the 3" ram-air intake head that fits to the top of a raised air intake tube, forming the forward-facing scoop that feeds cool, clea...
View full detailsSteering Boss Adaptor - a mounting adaptor between the steering column boss and an aftermarket steering wheel. It adapts the fixing pattern of the...
View full detailsWinch Accessory Kit supplied in a heavy-duty black nylon storage bag with internal compartments, for off-road vehicle recovery. The kit gathers th...
View full detailsWinch Cable Damper is a safety accessory placed over the winch line during vehicle recovery operations. By adding weight to the cable or synthetic ...
View full detailsWireless Remote Control replacement transmitter for the Terrafirma winch wireless control system. Provides hands-free winch operation via radio sig...
View full detailsRaised Air Intake relocating the engine air intake to an elevated position at the A-pillar, drawing clean air from above the standard bonnet-level ...
View full detailsSwing Away Spare Wheel Carrier for the Discovery 3 and 4, providing an external spare wheel mounting position at the rear of the vehicle. The carr...
View full detailsNutsert, M8 blind rivet nut for use where a permanent threaded insert is required and access to the reverse face of the panel or bracket is not pos...
View full detailsRadiator Muff in black, by Exmoor Trim, for the classic Defender radiator protection system. This cover fits over the front grille and radiator on...
View full detailsSpare Wheel Door Bracket - right-hand - for the Defender rear door spare wheel carrier. This pressed steel strengthening bracket reinforces the re...
View full detailsSpare Wheel Door Bracket - left-hand - for the Defender rear door spare wheel carrier. This pressed steel strengthening bracket reinforces the rea...
View full detailsAir Intake Grille for the right-hand front wing, covering the air intake aperture in the wing top. Finished in black with a silver mesh insert, in ...
View full detailsWheel Nuts - set of five, sufficient to secure one wheel. The nuts are sized for the MaxXtrac Mach 5 alloy wheel, giving the correct seat and thre...
View full detailsM16 Hex Nut is a plain hexagonal fastening nut used across the towing and body hardware. It is most commonly used to secure the tow ball to the to...
View full detailsAnti-Roll Bar Spacer Kit - 2-Hole for Land Rover Defender. These spacers are used to correct the anti-roll bar drop link geometry on lifted Defend...
View full detailsFloor Mat Set — moulded rubber floor mats for the front footwells, protecting the cabin floor and carpet. The tailored rubber mats sit in the driv...
View full detailsJack Adapter that provides a secure jacking point for a recovery jack. Bolts into the existing holes under the front bumper and rear crossmember t...
View full detailsLED Work Lamp rated at 48W, an auxiliary lighting unit for vehicle-mounted use. It provides high-output LED illumination for work and off-road app...
View full detailsSill Protector Pair - aluminium sill guards that mount along the lower body sills beneath the doors. They shield the sill panels from stone chips,...
View full detailsShock Absorber Boots are protective covers that fit over the shock absorber body to shield the shaft and seal from mud, grit and debris. Supplied ...
View full detailsPoly Bush Set A front and rear set of polyurethane suspension bushes that replace the original rubber bushes on the chassis and suspension. Polyure...
View full detailsTow hitch 110 TD5 adjustable
Waterproof Rear Seat Cover Set (Black) - tailored covers for the 60/40 split rear bench seat. Manufactured from hard-wearing woven polyester with ...
View full detailsBody Side Steps - a matched pair of fixed side runners for the lower body sides. Mounted along the sill line to the body and chassis fixing points...
View full detailsRear Bumper Corners are a pair of heavy-duty wraparound bumperettes that protect the vulnerable rear corners and sill ends of the bodywork. The po...
View full detailsTerrafirma discrete winch mount Discovery 3
Rear Step Fixing Kit supplies the fixings required to mount the rear step to the vehicle. It provides the hardware that secures the rear step asse...
View full detailsRear Step is a retractable step mounted at the rear of the vehicle. It provides a foothold for access to the rear door, load area and roof, and fo...
View full detailsRear Folding Step Mat for the rear bumper-mounted folding step assembly on the Land Rover Defender 90 and 110. This rubber anti-slip mat fits the ...
View full detailsWinch Bumper for the Land Rover Defender, in the non-air conditioning configuration. The bumper replaces the standard front bumper assembly and in...
View full detailsSide Steps - a matched left- and right-hand pair of tubular side runners that bolt to the sill and chassis mounting points, forming a continuous no...
View full detailsTow Hitch Locking Pin (R-Clip) is the spring-steel retaining clip that secures the tow pin in an adjustable tow hitch. It pushes through the hole i...
View full detailsTowing Bracket Assembly Front-mounted detachable towing bracket that bolts to the front chassis to provide a towing and recovery point at the front...
View full detailsQuarterback chassis for Serie 2/3 88" military, including Lightweight. The rear spring leaf supports are included, as well as the support of the fi...
View full detailsSill Protector - Aluminium Chequer Plate for the Defender 90. This aluminium chequer plate protector bolts over the door sill to shield it from sc...
View full detailsWing Protector - Long - 3mm Aluminium for the Defender front wings. Aluminium chequer-plate protector that mounts over the front wing tops of the ...
View full detailsRope Hook - a securing hook for the canvas hood (soft top). It provides an anchor point around which the hood tie-down rope is passed, holding the...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026