for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Foam Air Filter Eqv LR129322
Raised Air Intake - Top Section, the replacement upper section of the Terrafirma raised air intake. This is the head of the intake: the part that ...
View full detailsOff-Road Foam Air Filter Element for the air box in the engine induction system, dimensioned to sit in the standard housing in place of the paper e...
View full detailsSafari Raid Grill
Snorkel Pre-Filter Sock - a fabric sleeve that fits over the head of a raised air intake, upstream of the intake duct and the air box. It works as...
View full detailsSnorkel Pre-Filter Sock - a fabric sleeve that fits over the head of a raised air intake, upstream of the intake duct and the air box. It works as...
View full detailsStorage Box Lid & Clips - Low
Receiver Hitch Pin - the retaining pin for the integrated 2" receiver hitch on the TF883NAS rear step tow bar assembly. The pin passes through the...
View full detailsFuel Cooler Guard - an underbody protection plate for the diesel fuel cooler in the fuel supply and return circuit. The fuel cooler is mounted ben...
View full detailsTRED Bumper Spot Light Brackets - stainless steel spotlight mounting brackets, supplied as an optional extra for the TRED winch bumper range. The ...
View full detailsRecovery Point Trims - finishing trims for the rear bumper recovery point apertures, supplied as a pair. The trims fit around the bumper openings ...
View full detailsFuel Filler Surround Plate - a chequer plate panel framing the fuel filler aperture in the rear body side, within the exterior body protection asse...
View full detailsFuel Filler Surround Plate - a chequer plate panel framing the fuel filler aperture in the rear body side, within the exterior body protection asse...
View full detailsMirror Head Chequer Plate Panels are moulded plastic trim panels fitted to the door mirror housings. Flat aluminium chequer plate cannot follow th...
View full detailsFront Wing Corner Chequer Plate Panels are moulded plastic trim panels fitted to the front wing top corners. Flat aluminium chequer plate cannot f...
View full detailsRatchet Guy Ropes are a pair of tensioning lines for anchoring a vehicle awning, tent or canopy to the ground. Each line is 3 m of 6 mm cord fitte...
View full detailsSnatch Ring rated at 15 tonne minimum breaking strength (MBS), used to redirect the winch line or to double the effective line pull. A soft shackl...
View full detailsTactical Winch Hook forms the load-bearing termination at the working end of a winch rope, giving the connection point for shackles, soft shackles,...
View full detailsQuick Strap - a polyester hook-and-loop strap for securing luggage, equipment and loose cabling in or on the vehicle. 300 mm long by 25 mm wide. T...
View full detailsCargo Net - an elasticated securing net for the load space, roof rack or trailer. The net measures 1 m x 1 m unstretched and carries eight perimet...
View full detailsBumper Tread Plates - tread panels for the upper faces of the front bumper, supplied as a pair. They provide a non-slip standing surface when work...
View full detailsWinch Kit Bag - a carry bag for winching and recovery accessories, keeping shackles, straps, gloves and similar loose gear stored together in the v...
View full detailsRucksack Cooler Bag - a 25 litre insulated backpack-style cool bag for expedition and outdoor use. Constructed from waterproof 900D Oxford fabric ...
View full detailsScrolling LED Indicators - 95mm - Rear - Smoked - a set of 95mm scrolling indicator lamps with smoked lenses for the rear indicator positions in th...
View full detailsDifferential Guard - 5 mm steel underbody guard that shields the differential housing and nose-piece from impact damage on rock and rutted ground. ...
View full detailsSnatch Block - pulley block for the winching and recovery rigging kit, used to double a winch line or to redirect the pull around an obstacle. Swi...
View full detailsAwning Brackets - mounting brackets that secure an awning to a T-slot expedition roof rack. The brackets locate into the T-slot channels at the fr...
View full detailsLight Mounting Bracket Kit for T-slot expedition roof racks - mounting hardware for auxiliary lighting carried on the rack. The brackets locate in...
View full detailsFront Bumper Tread Plates - chequer plate covers for the upper face of the front bumper, within the exterior body protection assembly group. Suppli...
View full detailsMetal Badge - self-adhesive badge with a metal face and pre-applied adhesive backing. Fits to any clean, flat painted or plastic panel; no drillin...
View full detailsRoof Rack Sliding Nut Plate - 8 mm T-slot nut plate for aluminium expedition roof rack platforms, supplied in packs of ten. The plate slides into ...
View full detailsDry Bag - 80L - a waterproof stowage bag from the Terrafirma expedition and camping accessory range, finished in black. 80 litre capacity, sized f...
View full detailsDry Bag - 80L - a waterproof stowage bag from the Terrafirma expedition and camping accessory range, finished in red. 80 litre capacity, sized for...
View full detailsMud Deflector Set - four moulded deflectors covering the front and rear arches of a short-wheelbase body. Each deflector closes the open gap betwe...
View full detailsChequer Plates for the rear body corners, supplied as a left and right pair. The panels are cut to the profile of the rear corner and fix over the...
View full detailsLED light bar from the LEDriving Value (VX) range of auxiliary driving lights, built around a combo beam pattern. A combo reflector blends a spot ...
View full detailsSingle-point spare wheel mounting bracket for carrying one flat-sided fuel or water can on the spare wheel, moving can storage off the roof and out...
View full detailsMarshal Shelter - a 2.4m x 2m weatherproof shelter that can be pitched free-standing or attached to the side of a vehicle. The polyester flysheet ...
View full detailsDash Storage Unit - moulded storage compartment that fills the empty void below the top dash panel on the passenger side, above the grab rail. The...
View full detailsFront Mudflap Brackets - a pair of stainless steel brackets that carry the front mud flaps at the rear of the front wheel arches, forming part of t...
View full detailsRear Corner Kit - Black - 110 - Pre-07
Rear Mudflap Brackets - Pair - 90
Fuel Filter Relocation Kit - bracket kit that repositions the diesel fuel filter and eases the fuel pipe routing where the standard filter location...
View full detailsHazard 24 Amber Warning Light is a surface-mounted amber LED warning head, used as a directional warning lamp on recovery, highway maintenance, hau...
View full detailsWind Deflectors - Set of 4 - P38
Rear Quadrant Chequer Plate, Pair - protective body panelling for the rear quadrant panels, supplied as a matched left and right pair. Manufacture...
View full details11.4 litre fuel and water can in red, moulded in LLDPE for use with petrol, diesel or water. The flat-sided body sits flush against a mounting fac...
View full detailsTread Plates - Front Bumper - punched and serrated alloy plates for the top faces of a Terrafirma front bumper. Supplied as a pair. Part of the fr...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026