for Discounts / VAT
for Discounts & Correct VAT
Replacement parts for every Land Rover Discovery generation, from the Series I (1989 to 1998) through to the Discovery 5 (L462) and Discovery Sport (L550). Genuine, OEM, and aftermarket components stocked in the Netherlands for EU delivery, with fitment matched to your exact model and year. The Discovery 4 parts collection is one of our most active if you own an L319-platform vehicle.
Quick answer: The Discovery 3 (2004 to 2009) and Discovery 4 (2009 to 2016) share the L319 platform, so some components cross over between the two generations. Always confirm your production year via VIN before ordering suspension, driveline, or engine parts. If you own a Discovery Sport, it sits on a separate platform from the main Discovery line and parts are not interchangeable.
Oil Filter for Land Rover petrol and diesel engines, part of the engine lubrication circuit. This screw-on canister filter threads onto the filter...
View full detailsSwivel Housing Grease for the front axle swivel assembly, supplied as a single pre-measured one-shot sachet. The sachet delivers the correct charg...
View full detailsJoint washer exhaust TD5
Nyloc Nut with a 3/8" UNF thread, used to secure propshaft flange bolts. A nylon insert set into the crown of the nut deforms over the bolt thread...
View full detailsPropshaft Bolt - a fastener that secures the propshaft universal-joint flange to the differential drive flange within the driveline. It clamps the...
View full detailsTransfer Box Output Flange Oil Seal is a radial shaft seal fitted at the output flange of the LT230 transfer box, sealing between the rotating outp...
View full detailsBrake Caliper Bolt - M12 x 35mm threaded fastener securing the brake caliper to its mounting on the hub carrier. It holds the caliper in correct a...
View full detailsCrankshaft Spigot Bush is the clutch pilot bush that presses into the rear face of the crankshaft, between the engine and the clutch. It supports ...
View full detailsFuel Injector Harness for the Td5 fuel injection system, carrying the electrical connection between the engine wiring loom and the electronic unit ...
View full detailsClutch Release Bearing installed within the Clutch & Flywheel Assembly, operating between the clutch release fork and the clutch cover diaphrag...
View full detailsFront cover oil seal
Major Service Kit for the 2.5L Td5 engine, containing the filtration and service consumables for a full scheduled service. Kit contents: 1 x oil f...
View full detailsOil Filter for Land Rover petrol and diesel engines, part of the engine lubrication circuit. This screw-on canister filter threads onto the filter...
View full detailsHylomar Hylosil 100 is a neutral-curing RTV silicone sealant for gasketing, sealing and bonding in automotive and engineering applications. It cure...
View full detailsOil Filter for Land Rover petrol and diesel engines, part of the engine lubrication circuit. This screw-on canister filter threads onto the filter...
View full detailsFront Driveshaft Oil Seal located at the differential housing output in the Front Axle Assembly, sealing around the front halfshaft where it exits ...
View full detailsOil Seal for the LT230 transfer box input shaft. Part of the transfer box gear train. The seal fits around the rotating input shaft where it enter...
View full detailsTurbo Drain Gasket for the Td5 turbocharger oil drain. The gasket seals the joint where the oil return (drain) pipe meets the underside of the tur...
View full detailsStop/Tail Light Bulb - 12V 5/21W (trade reference 380) for rear lamp assemblies. This dual-filament bayonet bulb (BAY15d base) provides 5W tail li...
View full detailsFront Camshaft Oil Seal for the Td5 2.5L 5-Cylinder Turbo Diesel engine, fitted at the timing end of the camshaft within the cylinder head. Seated...
View full detailsOil Filter Rotor is the rotating element of the centrifugal oil filter on the Td5 2.5L 5-cylinder turbo diesel engine. Mounted within the centrifu...
View full detailsCam Cover Gasket for the 2.5L Td5 5-Cylinder Turbo Diesel engine. This gasket seals the camshaft cover to the top of the cylinder head, preventing...
View full detailsInjector Sealing Washer seals the base of the fuel injector into the cylinder head on the Td5 2.5L 5-cylinder turbo diesel engine. The washer sits...
View full detailsNyloc Nut with a 3/8" UNF thread and a 12 mm across-flats hex, in the full-height (thick) form. A nylon insert set into the crown of the nut defor...
View full detailsExhaust Manifold to Turbo Gasket seals the joint between the exhaust manifold outlet and the turbocharger inlet within the exhaust manifold and tur...
View full detailsOil Filter for the Td5 2.5L five-cylinder turbo diesel. Part of the engine lubrication system. The filter is a replaceable cartridge element that ...
View full detailsGasket and Seal Kit for the LT230 transfer box, supplying the gaskets and seals needed to reseal the casing on overhaul. Used when the transfer bo...
View full detailsNyloc Nut with an M20 thread, used across suspension and driveline flange fastenings. A nylon insert set into the crown of the nut deforms over th...
View full detailsDifferential Pinion Oil Seal with a double sealing lip, for the front and rear differentials. It is press-fitted into the differential housing aro...
View full detailsFront cover oil seal
Clutch Release Staple is the spring retaining clip that secures the clutch release bearing assembly to the clutch fork, holding the bearing in posi...
View full detailsExhaust Manifold Gasket for the Td5 2.5L 5-cylinder turbo diesel engine. Seals the joint between the exhaust manifold and the cylinder head, preve...
View full detailsFuel Injector Harness for the Td5 fuel injection system, carrying the electrical connection between the engine wiring loom and the electronic unit ...
View full detailsHylomar Universal Blue is a non-setting gasket jointing compound for use on gaskets and machined metal joint faces in automotive and engineering ap...
View full detailsCamshaft gasket TD5 1A622423 on
Inlet Manifold Gasket for the V8 petrol engine, forming the seal between the central inlet manifold casting and the cylinder head intake faces. It...
View full detailsExhaust Gasket - V8 for the exhaust downpipe assembly on V8 petrol engines. This gasket seals the flange joint at the exhaust downpipe, maintainin...
View full detailsFuel Connector Block Strainer O-Ring for the Td5 2.5L 5-Cylinder diesel engine. This O-ring seals the strainer within the fuel connector block, pr...
View full detailsReverse Lamp Bulb - a 21W 12V single-filament incandescent bulb (type P21W) with a BA15s single-contact bayonet cap, fitted to the rear lamp assemb...
View full detailsRear Wiper Blade, 14 inch, for the tailgate wiper system on the Discovery 2. This blade fits the rear wiper arm and provides the rubber wiping con...
View full detailsDiesel Fuel Filter - Inline for the 2.5L TDi and Td5 2.5L 5-Cylinder diesel fuel system. Fitted at the sedimentor position in the fuel supply line...
View full detailsMajor Service Kit for the 2.5L Td5 engine, containing the filtration and service consumables for a full scheduled service. Kit contents: 1 x oil f...
View full detailsFir Tree Fastener in light grey, for the roof trim and headlining assembly. Push-fit fastener that secures roof trim panels and headlining ancilla...
View full detailsClutch Clip - Push Rod to Lever for the hydraulic clutch actuation system. This spring clip secures the clutch slave cylinder push rod to the clut...
View full detailsSplit Pin locks a castellated (slotted) nut in place, passing through the nut slots and a cross-drilled hole in the shaft to stop the nut working l...
View full detailsDoor Casing Stud for the interior door casing assembly. Locating stud onto which the door casing mounts, retaining the trim panel and holding it i...
View full detailsOil Filter Housing Gasket for the Td5 2.5L five-cylinder turbo diesel engine, sealing the oil filter housing/adaptor to the cylinder block. It sea...
View full detailsUniversal Joint for the propshaft, transmitting rotational drive between shaft sections while accommodating the angular movement of the driveline. ...
View full detailsParts for every Land Rover Discovery generation, from the original 1989 Discovery 1 to the current Discovery 5 (L462) and Discovery Sport (L550). Genuine, OEM, and aftermarket components in stock, dispatched from the EU. Select your generation below to find parts matched to your exact model.
The Land Rover Discovery family spans six distinct generations, each with its own platform, engine range, and fitment boundaries. Choosing the correct child collection ensures you find parts matched to your specific model, not just the Discovery name.
| Generation | Chassis Code | Production Years | Platform Notes |
|---|---|---|---|
| Discovery 1 parts | No L-code | 1989 to 1998 | Body-on-frame, shared chassis architecture with Range Rover Classic and 90/110 Defender. Marketed at launch as Discovery Series I. |
| Discovery 2 parts | L318 | 1998 to 2004 | Body-on-frame, extended rear overhang, coil springs all round. Marketed as Discovery Series II. |
| Discovery 3 parts | L319 | 2004 to 2009 | Independent air suspension, Integrated Body Frame architecture |
| Discovery 4 parts | L319 | 2009 to 2016 | Shares L319 platform with Discovery 3, revised engines and interior |
| Discovery 5 parts | L462 | 2017 to present | New aluminium-intensive platform, separate from all previous generations |
| Discovery Sport parts | L550 | 2014 to present | Compact crossover, JLR D8 then Premium Transverse Architecture, related to Range Rover Evoque |
The Discovery 3 and Discovery 4 share the L319 platform designation, which means some structural, driveline, and suspension components overlap between the two generations. Where cross-generation fitment applies, part listings will confirm compatibility. If you are unsure of your exact model, use the identification guidance below before ordering.
Vehicle IdentificationThe Discovery name covers vehicles built between 1989 and today across multiple distinct platforms and engine families. Ordering by model name alone is not sufficient for fitment accuracy. The correct identification method depends on the generation.
Discovery 1 (1989 to 1998): chassis number stamped on the right-hand side of the bulkhead, with a duplicate plate in the engine bay. Pre-1996 vehicles use a 17-character VIN format introduced in 1980 for export markets, while early UK-market cars may carry an 11-digit chassis number on the plate. Cross-reference with the V5C or registration document if the plate is corroded.
Discovery 2 (1998 to 2004): 17-digit VIN stamped on the right-hand bulkhead and on a plate visible through the windscreen base. The 10th character identifies the model year.
Discovery 3, 4, 5, and Discovery Sport: standard 17-digit VIN on the windscreen base plate, on the driver-side door jamb sticker, and in the V5C. The 10th character identifies model year. For Discovery 3 and Discovery 4 in particular, confirm model year via VIN before ordering suspension, engine, or driveline components, as both share the L319 platform code but have different engine variants, transmission options, and calibration specifications.
For Discovery 1 vehicles where the original documentation is missing or the chassis plate is unreadable, the British Motor Industry Heritage Trust holds factory build records and issues Heritage Certificates confirming original specification and production date. See britishmotormuseum.co.uk/archive/heritage-certificates. For Discovery 2 onward, the standard Land Rover Workshop Manual for the relevant model contains the full VIN decoding reference.
Budget Parts stocks over 3,900 parts across the full Discovery family. Coverage spans suspension and steering, braking, cooling and heating, engine and ancillaries, driveline and propshafts, electrical and sensors, chassis and body, and clutch and transmission. Each category collection below filters parts across all compatible Discovery generations. If you know the component type you need, start there. If you are working on a specific generation, start with the relevant model collection from the generations table above.
Air springs, shock absorbers, control arms, bushings, and steering components across the Discovery range.
Suspension and steering parts →Discs, pads, calipers, hoses, and hydraulic components for every Discovery generation.
Brake system parts →Radiators, thermostats, water pumps, expansion tanks, and coolant hoses for petrol and TDV6 Discoveries.
Cooling and heating parts →Propshafts, driveshafts, CV joints, and universal joints across body-on-frame and IBF Discoveries.
Drive mechanism parts →Belts, pulleys, gaskets, sensors, and engine service components for the 200Tdi, 300Tdi, Td5, TDV6, SDV6, and petrol V6/V8 Discoveries.
Engine parts →Ignition components, sensors, switches, wiring, and electrical service parts across the Discovery range.
Electrical parts →Structural repair sections, crossmembers, body panels, and chassis fasteners, including Discovery 2 rear crossmember repair sections.
Chassis and body parts →The Discovery range covers thirty-seven years of production, and parts supply differs sharply between early Series-era models and current Discovery 5 vehicles. Three quality tiers run across the catalogue, and the right choice depends on the generation, the system, and how long you intend to keep the vehicle.
Genuine parts are boxed under the Land Rover or Jaguar Land Rover part number, produced to factory specification. For Discovery 3, 4, 5, and Discovery Sport, Genuine supply remains active and is the appropriate tier for warranty-sensitive repairs, air suspension components, and turbocharger or EGR replacement on the TDV6. For Discovery 1 and Discovery 2, Genuine supply has been thinning since 2010 and is restricted to selected service items.
OEM parts come from the same suppliers Land Rover uses on the production line, sold in the supplier's own box rather than the JLR box. ZF for automatic transmissions, Bosch for ignition and injection, Pierburg for EGR coolers and vacuum pumps, Delphi for diesel injection on the TDV6, and Valeo for clutch components are all present in the Discovery parts catalogue. OEM matches Genuine specification at a lower price.
Aftermarket parts come from third-party manufacturers to a functional specification. For older Discoveries where Genuine has been discontinued, aftermarket is often the only available tier and covers the practical bulk of restoration and DIY repair work. Quality varies by brand. Each product listing on this site states the tier and, where relevant, names the OEM supplier so the choice is explicit before purchase.
EU Stock and DispatchAll Discovery parts are stocked and dispatched from the Netherlands. Orders placed before 15:00 CET on working days ship the same day. Standard delivery within the EU is two to four working days for most member states, with no customs paperwork or import VAT between EU destinations. UK orders are dispatched under standard post-Brexit customs procedures with VAT and duties handled at delivery. For workshop and trade customers placing regular orders, contact Budget Parts directly for account terms.
Technical GuidesThe guides below cover the diagnostic and replacement decisions that come up most often on Discovery vehicles. Each one is generation-specific and identifies the parts that actually fix the underlying fault, not just the symptom.
For Discovery 4 TDV6 owners experiencing reduced power or limp mode. Covers the upstream causes of DPF blockage including EGR faults and failed sensors, with guidance on the correct parts to address the root cause before replacing the filter.
Discovery 4 DPF parts guide →For Discovery 2 (L318) owners facing APK or MOT structural failure due to crossmember corrosion. Explains how internal corrosion develops, how to inspect correctly, and which repair section to select for a long-term solution.
Discovery 2 crossmember repair guide →For Discovery 3 and Discovery 4 owners with electronic parking brake warnings. Covers the common misdiagnosis of actuator failure, explains why worn brake shoes and cable resistance are typically the root cause, and identifies the parts required for a correct repair.
Discovery EPB failure guide →Identification depends on the generation. For Discovery 1 (1989 to 1998), check the chassis number stamped on the right-hand bulkhead or on the plate in the engine bay, and cross-reference with the V5C. For Discovery 2 (1998 to 2004) and all later generations, use the 17-digit VIN on the windscreen base plate or the driver-side door jamb sticker. The 10th character of the VIN identifies the model year. Discovery 1 covers 1989 to 1998, Discovery 2 covers 1998 to 2004, Discovery 3 covers 2004 to 2009, Discovery 4 covers 2009 to 2016, Discovery 5 covers 2017 to present, and the Discovery Sport has been produced since 2014. For Discovery 1 vehicles with missing documentation, the British Motor Industry Heritage Trust issues Heritage Certificates confirming factory build specification.
Partially. The Discovery 3 and Discovery 4 share the L319 platform designation, which means some structural, driveline, and suspension components are common between the two generations. However, the Discovery 4 introduced revised engine variants, updated transmission calibrations, and different electrical specifications compared to the Discovery 3. You cannot assume full cross-compatibility. Always check the part listing for confirmed fitment before ordering. Where a part fits both L319 generations, the product listing will state this. If you are uncertain, filter by your specific model within the Discovery 3 or Discovery 4 collection pages.
Genuine parts carry the Land Rover or Jaguar Land Rover part number and are manufactured to the original factory specification. OEM parts are produced by the original component supplier, often the same manufacturer that supplies the Genuine range, but sold under the supplier's own brand. In most applications, OEM quality is equivalent to Genuine at a lower price. Aftermarket parts are produced by third-party manufacturers to a functional specification and vary in quality by brand and application. For critical systems such as braking, steering, and air suspension on a Discovery 3 or Discovery 4, Genuine or OEM is the recommended tier. For wear items, fasteners, and filters, quality aftermarket parts are an appropriate and cost-effective choice.
Yes. Budget Parts stocks components for all six Discovery generations, including the Discovery 1 (1989 to 1998) and Discovery 2 (L318, 1998 to 2004). For these older generations, some Genuine Land Rover supply has been discontinued, and stock consists of OEM-equivalent and aftermarket components that meet the original specification. For the Discovery 3, Discovery 4, Discovery 5, and Discovery Sport, both Genuine and OEM supply remains active alongside aftermarket options. If a specific part is not listed, contact Budget Parts directly with your part number or chassis number for availability.
No. The Discovery Sport and the Discovery 5 are separate vehicles on distinct platforms. The Discovery Sport (L550) is a compact crossover produced from 2014 and is based on the JLR D8 architecture, later updated to the Premium Transverse Architecture shared with the Range Rover Evoque. The Discovery 5 (L462) is a full-size SUV produced from 2017 on a separate aluminium-intensive platform. The two models share no platform or major mechanical components. Parts for each model are listed in separate collections and are not interchangeable.
All Discovery parts are dispatched from the Netherlands. Orders placed before 15:00 CET on working days ship the same day. Standard delivery is two to four working days to most EU member states, with no customs paperwork or import VAT between EU destinations. UK orders ship under standard post-Brexit customs procedures with VAT and duties applied at delivery. Tracking is provided on every shipment. For trade and workshop accounts placing regular orders, contact Budget Parts directly for account terms.