for Discounts / VAT
for Discounts & Correct VAT
Replacement parts for every Land Rover Discovery generation, from the Series I (1989 to 1998) through to the Discovery 5 (L462) and Discovery Sport (L550). Genuine, OEM, and aftermarket components stocked in the Netherlands for EU delivery, with fitment matched to your exact model and year. The Discovery 4 parts collection is one of our most active if you own an L319-platform vehicle.
Quick answer: The Discovery 3 (2004 to 2009) and Discovery 4 (2009 to 2016) share the L319 platform, so some components cross over between the two generations. Always confirm your production year via VIN before ordering suspension, driveline, or engine parts. If you own a Discovery Sport, it sits on a separate platform from the main Discovery line and parts are not interchangeable.
Crankshaft Pulley mounts on the front of the crankshaft of the 2.0L 16V Ti-VCT turbocharged petrol engine (240PS). It transfers drive from the cra...
View full detailsAutomatic Transmission Fluid Change Kit for the ZF 8HP eight-speed automatic gearbox - transmission oil pan and fluid service. The eight-speed gea...
View full detailsCamshaft Sprocket is a timing-drive gear in the valve train of the 2.0L Ingenium diesel engine (AJ200D). Mounted on the end of the camshaft, it is...
View full detailsBrake Actuator - electric parking brake (EPB) actuator, part of the electronic parking brake assembly. The motor-driven actuator applies and relea...
View full detailsRadiator Assembly - the primary coolant-to-air heat exchanger of the engine cooling system, mounted in the front cooling pack. Hot coolant leaving...
View full detailsAir Conditioning Condenser for R134a refrigerant systems, mounted at the front of the vehicle ahead of the radiator. It rejects heat from the high-...
View full detailsCooler Assembly - Fuel No Gasket
Anti-Roll Bar - Rear - rear stabiliser bar from the rear suspension cross member assembly. The bar runs across the vehicle behind the rear axle, c...
View full detailsDrive Shaft - right-hand rear halfshaft in the rear axle driveline. It transmits drive from the rear differential to the rear wheel hub, using con...
View full detailsAutomatic Transmission Fluid Change Kit for the ZF 6HP six-speed automatic gearbox - transmission oil pan and fluid service. On this gearbox the f...
View full detailsRadiator Assembly for the engine cooling system, fitted to V6 and V8 petrol applications. The radiator dissipates heat from the engine coolant int...
View full detailsTransmission Fluid Change Kit - a service kit for a fluid change on the 6-speed automatic transmission. It provides the components required to dra...
View full detailsFuel Pump and Sender Unit - combined in-tank fuel pump and fuel level sender, part of the fuel tank pump, sender and mountings group. The electric...
View full detailsFront End Assembly is the structural front-end panel (slam panel) that forms the forward face of the body. It carries the bonnet lock platform and ...
View full detailsCrownwheel and Pinion Set - 3.54:1 final drive ratio (13-tooth pinion, 46-tooth crownwheel), for the two-pinion differential used in the Land Rover...
View full detailsWindow Regulator and Motor - rear door window lift mechanism, supplied complete with its electric drive motor. The regulator sits within the rear ...
View full detailsPower Steering Hose Assembly - the hydraulic pipework of the power-assisted steering circuit, supplied as a complete pre-formed pipe cluster rather...
View full detailsOil Cooler dissipates heat from the engine oil to help maintain a stable oil operating temperature. Fitted in the lubrication circuit of the 2.0L ...
View full detailsSuspension Kit - a standard ride-height, heavy-duty coil spring and shock absorber set covering both the front and rear axles. The kit contains he...
View full detailsThrottle Body and Motor for the 3.0L V6 diesel engine, mounted in the air intake tract with its electric actuator motor integrated. In this diesel...
View full detailsAir Intake Plenum Extension Moulding in black, the moulded panel that sits in the scuttle area between the rear edge of the bonnet and the base of ...
View full detailsDistributor for the 3.9L V8 EFI petrol engine ignition system. Driven from the camshaft, it routes high-tension voltage from the ignition coil to ...
View full detailsFront Axle Shaft - the front propshaft that transmits drive from the transfer case output to the front differential, feeding torque to the front ax...
View full detailsStarter Motor for the engine starting system, mounted at the engine-to-transmission bellhousing. When cranking, the integral solenoid drives the p...
View full detailsBrake Vacuum Pump, the auxiliary vacuum source for the brake servo on petrol engines. Petrol engines - particularly direct-injection and superchar...
View full detailsSwivel Kit - repair kit for one front swivel housing assembly. The swivel housing is the steering pivot at the outer end of the front axle case: it...
View full detailsTransmission Sleeve Kit
Engine Cooling Fan Motor
Strip Cover
8HP Gearbox Service Kit supplies the components for a complete fluid change on the ZF 8HP70 eight-speed automatic transmission. On this gearbox the...
View full detailsCatalytic Converter for the V8 petrol exhaust system. It treats exhaust gases to reduce emissions, fitted in the exhaust line on applications equi...
View full detailsWindow Regulator and Motor - rear door window lift mechanism, supplied complete with its electric drive motor. The regulator sits within the rear ...
View full detailsKnock Sensor is part of the engine management system on the V8 petrol engine. Mounted to the cylinder block, it detects combustion knock (detonati...
View full detailsABS Ring - the rear reluctor (exciter) ring in the anti-lock braking system. Mounted at the rear, it is the toothed ring the wheel speed sensor re...
View full detailsWheel Spacers - Set of 4 - spacers that fit between the hub and wheel to increase track width, improving stance and clearing larger tyres or brake ...
View full detailsBreather Cover - crankcase ventilation cover on the 2.0L AJ20P4 petrol engine, forming part of the crankcase emission control assembly. It seals t...
View full detailsAlloy Wheel - road wheel measuring 18 inch diameter by 8J rim width, with an ET20 offset and a 5 x 165 mm PCD stud pattern, finished in silver. Th...
View full detailsSwivel Kit - repair kit for one front swivel housing assembly. The swivel housing is the steering pivot at the outer end of the front axle case: it...
View full detailsSwivel Kit - repair kit for one front swivel housing assembly. The swivel housing is the steering pivot at the outer end of the front axle case: it...
View full detailsSwivel Repair Kit - swivel housing service kit for one side of the front axle, supplied without the swivel housing ball. It renews the sealing and...
View full detailsFuel Pump - high-pressure, engine-mounted fuel injection pump within the direct-injection fuel system on petrol engines. Driven off the engine, it...
View full detailsBrake Caliper for the front left-hand position, supplied without brake pads. The caliper houses the hydraulic pistons that clamp the brake pads ag...
View full detailsBrake Calliper for the front axle, right-hand side, part of the front disc brake assembly. The calliper houses the hydraulic pistons and clamps th...
View full detailsFixed Side Steps - a complete kit of body-side steps mounting to the sill and underbody attachment points as part of the exterior accessory install...
View full detailsDog Guard - a load compartment partition separating the loadspace from the passenger cabin. The guard mounts behind the rear seat backs and stops ...
View full detailsTowing Hook Mounting Kit
Side Step Runners – stainless steel tubular side steps, supplied as a pair with an integrated front mud flap. The runners bolt to the sill mountin...
View full detailsFront Axle Drive Shaft - left-hand side, operating within the front axle drive shaft and constant velocity joint assembly. Transmits drive from th...
View full detailsParts for every Land Rover Discovery generation, from the original 1989 Discovery 1 to the current Discovery 5 (L462) and Discovery Sport (L550). Genuine, OEM, and aftermarket components in stock, dispatched from the EU. Select your generation below to find parts matched to your exact model.
The Land Rover Discovery family spans six distinct generations, each with its own platform, engine range, and fitment boundaries. Choosing the correct child collection ensures you find parts matched to your specific model, not just the Discovery name.
| Generation | Chassis Code | Production Years | Platform Notes |
|---|---|---|---|
| Discovery 1 parts | No L-code | 1989 to 1998 | Body-on-frame, shared chassis architecture with Range Rover Classic and 90/110 Defender. Marketed at launch as Discovery Series I. |
| Discovery 2 parts | L318 | 1998 to 2004 | Body-on-frame, extended rear overhang, coil springs all round. Marketed as Discovery Series II. |
| Discovery 3 parts | L319 | 2004 to 2009 | Independent air suspension, Integrated Body Frame architecture |
| Discovery 4 parts | L319 | 2009 to 2016 | Shares L319 platform with Discovery 3, revised engines and interior |
| Discovery 5 parts | L462 | 2017 to present | New aluminium-intensive platform, separate from all previous generations |
| Discovery Sport parts | L550 | 2014 to present | Compact crossover, JLR D8 then Premium Transverse Architecture, related to Range Rover Evoque |
The Discovery 3 and Discovery 4 share the L319 platform designation, which means some structural, driveline, and suspension components overlap between the two generations. Where cross-generation fitment applies, part listings will confirm compatibility. If you are unsure of your exact model, use the identification guidance below before ordering.
Vehicle IdentificationThe Discovery name covers vehicles built between 1989 and today across multiple distinct platforms and engine families. Ordering by model name alone is not sufficient for fitment accuracy. The correct identification method depends on the generation.
Discovery 1 (1989 to 1998): chassis number stamped on the right-hand side of the bulkhead, with a duplicate plate in the engine bay. Pre-1996 vehicles use a 17-character VIN format introduced in 1980 for export markets, while early UK-market cars may carry an 11-digit chassis number on the plate. Cross-reference with the V5C or registration document if the plate is corroded.
Discovery 2 (1998 to 2004): 17-digit VIN stamped on the right-hand bulkhead and on a plate visible through the windscreen base. The 10th character identifies the model year.
Discovery 3, 4, 5, and Discovery Sport: standard 17-digit VIN on the windscreen base plate, on the driver-side door jamb sticker, and in the V5C. The 10th character identifies model year. For Discovery 3 and Discovery 4 in particular, confirm model year via VIN before ordering suspension, engine, or driveline components, as both share the L319 platform code but have different engine variants, transmission options, and calibration specifications.
For Discovery 1 vehicles where the original documentation is missing or the chassis plate is unreadable, the British Motor Industry Heritage Trust holds factory build records and issues Heritage Certificates confirming original specification and production date. See britishmotormuseum.co.uk/archive/heritage-certificates. For Discovery 2 onward, the standard Land Rover Workshop Manual for the relevant model contains the full VIN decoding reference.
Budget Parts stocks over 3,900 parts across the full Discovery family. Coverage spans suspension and steering, braking, cooling and heating, engine and ancillaries, driveline and propshafts, electrical and sensors, chassis and body, and clutch and transmission. Each category collection below filters parts across all compatible Discovery generations. If you know the component type you need, start there. If you are working on a specific generation, start with the relevant model collection from the generations table above.
Air springs, shock absorbers, control arms, bushings, and steering components across the Discovery range.
Suspension and steering parts →Discs, pads, calipers, hoses, and hydraulic components for every Discovery generation.
Brake system parts →Radiators, thermostats, water pumps, expansion tanks, and coolant hoses for petrol and TDV6 Discoveries.
Cooling and heating parts →Propshafts, driveshafts, CV joints, and universal joints across body-on-frame and IBF Discoveries.
Drive mechanism parts →Belts, pulleys, gaskets, sensors, and engine service components for the 200Tdi, 300Tdi, Td5, TDV6, SDV6, and petrol V6/V8 Discoveries.
Engine parts →Ignition components, sensors, switches, wiring, and electrical service parts across the Discovery range.
Electrical parts →Structural repair sections, crossmembers, body panels, and chassis fasteners, including Discovery 2 rear crossmember repair sections.
Chassis and body parts →The Discovery range covers thirty-seven years of production, and parts supply differs sharply between early Series-era models and current Discovery 5 vehicles. Three quality tiers run across the catalogue, and the right choice depends on the generation, the system, and how long you intend to keep the vehicle.
Genuine parts are boxed under the Land Rover or Jaguar Land Rover part number, produced to factory specification. For Discovery 3, 4, 5, and Discovery Sport, Genuine supply remains active and is the appropriate tier for warranty-sensitive repairs, air suspension components, and turbocharger or EGR replacement on the TDV6. For Discovery 1 and Discovery 2, Genuine supply has been thinning since 2010 and is restricted to selected service items.
OEM parts come from the same suppliers Land Rover uses on the production line, sold in the supplier's own box rather than the JLR box. ZF for automatic transmissions, Bosch for ignition and injection, Pierburg for EGR coolers and vacuum pumps, Delphi for diesel injection on the TDV6, and Valeo for clutch components are all present in the Discovery parts catalogue. OEM matches Genuine specification at a lower price.
Aftermarket parts come from third-party manufacturers to a functional specification. For older Discoveries where Genuine has been discontinued, aftermarket is often the only available tier and covers the practical bulk of restoration and DIY repair work. Quality varies by brand. Each product listing on this site states the tier and, where relevant, names the OEM supplier so the choice is explicit before purchase.
EU Stock and DispatchAll Discovery parts are stocked and dispatched from the Netherlands. Orders placed before 15:00 CET on working days ship the same day. Standard delivery within the EU is two to four working days for most member states, with no customs paperwork or import VAT between EU destinations. UK orders are dispatched under standard post-Brexit customs procedures with VAT and duties handled at delivery. For workshop and trade customers placing regular orders, contact Budget Parts directly for account terms.
Technical GuidesThe guides below cover the diagnostic and replacement decisions that come up most often on Discovery vehicles. Each one is generation-specific and identifies the parts that actually fix the underlying fault, not just the symptom.
For Discovery 4 TDV6 owners experiencing reduced power or limp mode. Covers the upstream causes of DPF blockage including EGR faults and failed sensors, with guidance on the correct parts to address the root cause before replacing the filter.
Discovery 4 DPF parts guide →For Discovery 2 (L318) owners facing APK or MOT structural failure due to crossmember corrosion. Explains how internal corrosion develops, how to inspect correctly, and which repair section to select for a long-term solution.
Discovery 2 crossmember repair guide →For Discovery 3 and Discovery 4 owners with electronic parking brake warnings. Covers the common misdiagnosis of actuator failure, explains why worn brake shoes and cable resistance are typically the root cause, and identifies the parts required for a correct repair.
Discovery EPB failure guide →Identification depends on the generation. For Discovery 1 (1989 to 1998), check the chassis number stamped on the right-hand bulkhead or on the plate in the engine bay, and cross-reference with the V5C. For Discovery 2 (1998 to 2004) and all later generations, use the 17-digit VIN on the windscreen base plate or the driver-side door jamb sticker. The 10th character of the VIN identifies the model year. Discovery 1 covers 1989 to 1998, Discovery 2 covers 1998 to 2004, Discovery 3 covers 2004 to 2009, Discovery 4 covers 2009 to 2016, Discovery 5 covers 2017 to present, and the Discovery Sport has been produced since 2014. For Discovery 1 vehicles with missing documentation, the British Motor Industry Heritage Trust issues Heritage Certificates confirming factory build specification.
Partially. The Discovery 3 and Discovery 4 share the L319 platform designation, which means some structural, driveline, and suspension components are common between the two generations. However, the Discovery 4 introduced revised engine variants, updated transmission calibrations, and different electrical specifications compared to the Discovery 3. You cannot assume full cross-compatibility. Always check the part listing for confirmed fitment before ordering. Where a part fits both L319 generations, the product listing will state this. If you are uncertain, filter by your specific model within the Discovery 3 or Discovery 4 collection pages.
Genuine parts carry the Land Rover or Jaguar Land Rover part number and are manufactured to the original factory specification. OEM parts are produced by the original component supplier, often the same manufacturer that supplies the Genuine range, but sold under the supplier's own brand. In most applications, OEM quality is equivalent to Genuine at a lower price. Aftermarket parts are produced by third-party manufacturers to a functional specification and vary in quality by brand and application. For critical systems such as braking, steering, and air suspension on a Discovery 3 or Discovery 4, Genuine or OEM is the recommended tier. For wear items, fasteners, and filters, quality aftermarket parts are an appropriate and cost-effective choice.
Yes. Budget Parts stocks components for all six Discovery generations, including the Discovery 1 (1989 to 1998) and Discovery 2 (L318, 1998 to 2004). For these older generations, some Genuine Land Rover supply has been discontinued, and stock consists of OEM-equivalent and aftermarket components that meet the original specification. For the Discovery 3, Discovery 4, Discovery 5, and Discovery Sport, both Genuine and OEM supply remains active alongside aftermarket options. If a specific part is not listed, contact Budget Parts directly with your part number or chassis number for availability.
No. The Discovery Sport and the Discovery 5 are separate vehicles on distinct platforms. The Discovery Sport (L550) is a compact crossover produced from 2014 and is based on the JLR D8 architecture, later updated to the Premium Transverse Architecture shared with the Range Rover Evoque. The Discovery 5 (L462) is a full-size SUV produced from 2017 on a separate aluminium-intensive platform. The two models share no platform or major mechanical components. Parts for each model are listed in separate collections and are not interchangeable.
All Discovery parts are dispatched from the Netherlands. Orders placed before 15:00 CET on working days ship the same day. Standard delivery is two to four working days to most EU member states, with no customs paperwork or import VAT between EU destinations. UK orders ship under standard post-Brexit customs procedures with VAT and duties applied at delivery. Tracking is provided on every shipment. For trade and workshop accounts placing regular orders, contact Budget Parts directly for account terms.