Land Rover Discovery Parts

Exhaust downpipe gasket sealing the flanged joint between the front exhaust pipe (downpipe) and the catalytic converter, in the front section of th...

Radiator Hose - coolant hose in the auxiliary cooling circuit fitted to supercharged petrol engines. It runs from the auxiliary radiator to the in...

Coolant Hose - a hose from the engine cooling circuit, forming one of the connections that carry coolant between the radiator, the engine and the a...

Cylinder Head Gasket sealing the cylinder head to the engine block. Fitted to the 2.0L four-cylinder AJ200 (Ingenium) petrol engine, including PHE...

Anti-Roll Bar Bush - front anti-roll bar mounting bush, part of the front suspension arm and cross member assembly. The bush sits between the anti...

Anti-Roll Bar Bush - rear anti-roll bar mounting bush, part of the rear suspension and cross member assembly. The bush sits between the anti-roll ...

Air Suspension Line - Compressor - 500 mm is a 500 mm service length of air suspension pipe used in the compressor circuit of the electronic four c...

Spark Plug Aperture Gasket seals the spark plug aperture in the cylinder head cover on the left hand cylinder bank. It closes the joint between th...

Horn

Shock Absorber Top Mount for the front strut assembly. The top mount secures the upper end of the front strut to the vehicle body, isolating suspe...

Anti-Roll Bar Link for the front suspension, connecting the anti-roll (stabiliser) bar to the suspension arm. The link transfers suspension moveme...

Fuel Filler Restrictor for diesel vehicles, fitted inside the fuel filler neck as part of the fuel tank and filler assembly. It forms a physical b...

Bonnet Release Cable operating from the interior release handle, part of the Bonnet Latch and Release Linkage. Pulling the release handle in the d...

Door Release Cable for the interior door handle, part of the Door Lock and Latch Control assembly. The cable connects the inner door release handl...

Front Grille Badge in gold finish, fitted to the front radiator grille panel. The badge mounts to the grille to carry the marque identity at the f...

Trim clip used to retain trim panels to the body structure. Size 8.5 mm, with a panel grip range of 0.8 to 2.2 mm. The clip locates through the pa...

Chain - Timing

Brake Disc & Caliper Bolt - a fixing bolt for the brake disc and caliper assembly. It is used at both the front and rear brake disc and calipe...

Heater Hose is a moulded coolant hose in the heater circuit of the engine cooling system, connecting the engine coolant supply to the heater core. ...

Coolant Hose from the EGR cooler to the heater inlet, part of the engine cooling and exhaust gas recirculation circuit. The EGR cooler is coolant-...

Brake Pad Set for the rear disc brake assembly. The pads sit in the rear caliper carrier and are clamped against the brake disc by the caliper pis...

O-Ring seals the variable valve timing (VVT) solenoid within the timing gear and sprocket assembly. It maintains an oil-tight joint between the VV...

Electronic Parking Brake Switch for the electronic park brake (EPB) control circuit, mounted in the facia centre-console switch pack. The switch p...

Brake Fluid Reservoir for the brake master cylinder and servo assembly. The reservoir mounts on top of the master cylinder and holds the brake flu...

Fan Pulley - viscous fan drive pulley from the accessory drive (pulleys and drive belts) assembly. One fitted per engine. Driven by the auxiliary ...

Exhaust Gasket for the flanged joint between the exhaust front pipe and the catalyst section. It seals the bolted flange where the front pipe meet...

Turbo Oil Return Hose Gasket seals the upper joint of the turbocharger oil return hose, where the hose meets the turbocharger housing in the engine...

Crankcase Breather Hose forms part of the crankcase emission control (ventilation) system on the 4.4L V8 AJ petrol engine. It carries crankcase bl...

Spark Plug Aperture Gasket for the right-hand camshaft cover, sealing the spark plug well against oil ingress. The camshaft cover carries a tube f...

Turbocharger Blanking Plug - sealing plug fitted to the right-hand (secondary) turbocharger of the twin-turbo installation. It closes off a port on...

Gasket - Oil Filter to Block seals the joint between the oil filter housing and the cylinder block, within the Oil Cooler and Filter assembly. It ...

Hex Head Nut - M14 x 70mm. Crankshaft pulley fixing. It secures the crankshaft pulley and drive-belt assembly at the crankshaft nose, seating agai...

Secondary Drive Belt from the front end accessory drive, 1444 mm in length and eight-ribbed. It runs from the crankshaft pulley over the tensioner...

Brake Disc Splash Shield - front right-hand side, part of the front brake disc and caliper assembly. The shield mounts to the hub carrier behind t...

Cowl Top Panel - the scuttle panel at the base of the windscreen, part of the body structure. The panel covers the plenum area between the rear ed...

Exhaust Manifold Gasket - left-hand side seals the exhaust manifold against the cylinder head face on the left-hand bank of the engine. It contain...

Blanking Plug used within the engine cooling system - thermostat housing, radiator and coolant expansion tank, and the cooling pipework. The plug ...

Expansion Tank Seal - sealing ring for the bleed valve fitted to the coolant expansion tank in the engine cooling system. Seals the bleed valve in...

Air Conditioning O-Ring - a sealing ring for the air conditioning refrigerant circuit. It seals the joints between refrigerant lines and component...

Breather Tube - crankcase ventilation tube within the engine's emission control system. It routes crankcase gases from the engine back into the in...