Land Rover Discovery Parts

Brake Pads for the front axle, part of the front brake discs and calipers assembly. The front pads carry the greater share of the braking load. Th...

Rear Axle Pinion Repair Kit - service kit for the drive pinion in the rear differential assembly. The drive pinion transmits torque from the props...

Fuel Vapour Valve (Purge Control Valve) - electrically operated solenoid valve in the evaporative emission control (EVAP) system, for supercharged ...

Supercharger Isolator - the torsional damping coupler inside the supercharger drive, sitting between the drive input and the rotor pack of the Root...

Air Suspension Ride Height Sensor - position sensor within the electronic air suspension system. Mounted between the body/chassis and a suspension...

Parking Aid Sensor - ultrasonic transducer for the Parking Distance Control (PDC) system, mounted through the rear bumper cover. Straight-bodied ty...

Timing Chain Tensioner for the timing chain drive of the 5.0L V8 (AJ133) and 3.0L supercharged V6 petrol engines. It bears against the timing chain...

Camshaft Sprocket for the timing drive of the Ingenium engine family - the 2.0L and 3.0L diesel and 3.0L petrol units. Mounted on the end of the ca...

TPMS Sensor Kit for the tyre pressure monitoring system. The sensor sits inside the wheel at the valve position, measuring the tyre's internal pres...

Crankshaft Seal - Rear - 1.5 mm seals the rear of the crankshaft where it exits the cylinder block at the flywheel and drive plate end. Supplied c...

Drive Belt Tensioner for the primary accessory drive at the front of the engine. The spring-loaded tensioner holds the correct tension on the belt ...

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

Dust Cover - Fuel Filler is a protective cover fitted at the fuel tank filler neck. It locates behind the fuel filler flap and shields the filler ...

Drive Belt Tensioner for the secondary (supercharger) belt drive fitted to the supercharged petrol V6 and V8 engines. It uses a spring-loaded pivot...

Engine Mounting supports the engine on the subframe and damps vibration transmitted into the body. Fitted to the 2.0L 16V TiVCT turbocharged petro...

EGR Cooler Hose for the exhaust gas recirculation (EGR) circuit on the 3.0L 24V DOHC V6 turbo diesel engine. It carries engine coolant to the EGR ...

Front Lower Engine Mounting is the lower insulator supporting the engine at the front of the mounting system. It locates the engine to the subfram...

Ride Height Sensor for the front of the electronic air suspension system. It measures the position of the front suspension arm relative to the body...

Manifold Absolute Pressure (MAP) Sensor for the 3.0L V6 diesel engine. Mounted on the throttle housing, it measures the absolute pressure in the i...

Water pump for the 3.0L V6 diesel (TDV6 / SDV6). It drives coolant circulation through the cylinder block and heads, out through the radiator circu...

Coolant Degas Separator, part of the engine cooling circuit on 2.0L Ingenium (AJ200) petrol applications. The degas separator removes entrained ai...

Oil Filter Housing Cover is the cover for the cartridge-type oil filter assembly on 3.0 GDI petrol and 5.0 AJ-V8 engines. This cover retains the r...

Front Suspension Spring is a coil spring in the front suspension, seated over the front damper. It carries the vehicle's weight at the front axle ...

Steering Connecting Rod from the front steering linkage - the inner rod running from the steering gear to the outer tie rod end. Transfers the lin...

Crankshaft Trigger Wheel for the engine timing and crankshaft position system. The trigger wheel (reluctor ring) mounts on the crankshaft and provi...

Intermediate Exhaust Heat Shield - heat shield for the intermediate section of the exhaust system. It mounts between the exhaust pipework and the ...

Transmission Oil Cooler Pipe for models fitted with the ZF 8-speed automatic gearbox. The rigid tube carries automatic transmission fluid between ...

Ride Height Sensor - electronic air suspension height sensor. The sensor links the suspension arm to the body and continuously reports the ride he...

Balance Shaft - counterweighted shaft forming part of the engine balancer assembly in the lower block. Driven from the crankshaft and running at t...

Front Axle Drive Shaft Bracket that carries the intermediate bearing of the front axle drive shaft where the shaft runs from the transfer case. It...

Front Door Latch mounted in the front door as part of the door locking and latching mechanism. It engages the striker on the body pillar to hold t...

Fuel Pump Drive Belt Kit for the rear accessory drive of the 3.0L V6 diesel engine. The belt transmits drive to the high-pressure fuel injection p...

Timing Chain Tensioner - Lower in the timing chain drive of the AJ-V8 petrol engine (4.4L and 4.2L supercharged). It maintains correct tension on ...

Crankshaft Pulley with integral torsional vibration damper, mounted on the crankshaft nose of the 2.0L Ingenium AJ200 four-cylinder petrol and dies...

Water Pump is part of the engine cooling system. It circulates coolant through the cylinder block, cylinder head and radiator to carry heat away f...

Wheel Hub is part of the wheel-end assembly at the suspension corner. It carries the wheel bearing and provides the mounting flange for the road w...

Passive Start Module is part of the keyless (passive) start and vehicle anti-theft system. It authenticates the smart key fob and allows the engin...

Front Brake Pad Set - the friction pads for the front-axle disc brakes. The pads sit in the caliper and are clamped against the brake disc by the c...

Secondary Air Injection Hose - flexible hose in the secondary air injection system of the V8 petrol engine. It carries pumped air through the seco...

Water Outlet Adaptor for the engine cooling circuit of the 2.0L turbocharged petrol engine (TIVCT). The adaptor forms the coolant outlet on the en...