Land Rover Fuel System Parts

Fuel Tank Plate - Rear Fixing is the mounting plate used to secure the rear of the fuel tank on 88" wheelbase Series Land Rovers. It provides the s...

cable choke S3 - Right Hand Drive 2.25L 4-cylinder petrol fitted with steering column lock, - Left Hand Drive 2.6L 6-cylinder petrol fitted with s...

Fuel System Gasket within the multi-point injection assembly. This flat sealing gasket maintains the integrity of the fuel injection circuit at th...

Fuel Tank Filler Hose - moulded rubber hose connecting the filler neck to the fuel tank. Carries fuel from the filler opening down into the tank a...

Hex Nut - 7/16 UNF fixing nut. Used on the fuel pipe unions of the 3.5L V8 twin-carburettor petrol engine. Also supplied as part of a service kit.

Sedimentor O-Ring for the diesel fuel filter assembly. This rubber sealing ring seals the sedimentor bowl against the filter head, preventing fuel...

Flexible Rubber Mounting Bush for the Land Rover Discovery 1 and Range Rover Classic. This rubber isolator bush is used in various under-bonnet mo...

Jerry Can Nozzle A pour spout that fits the neck of a jerry can to direct the flow of fuel or water when decanting into a vehicle tank or container...

Injector Pipe Kit - set of 4 high-pressure fuel pipes for the 300Tdi 4-cylinder turbo diesel engine, mechanical injection pump variant (Less EDC). ...

Throttle Lever A lever in the accelerator (throttle) linkage of the carburettor V8. It transmits movement from the accelerator cable to the carbur...

Injector Pipe for the No.4 cylinder of the 2.5L 200TDi diesel engine. This rigid high-pressure steel pipe carries metered fuel from the injection p...

Injector O-Ring - a sealing ring for the fuel injectors in the electronic fuel injection system. It seals the injector where it locates in its bore...

Fuel Filler Cap Seal for the fuel system of the Range Rover Classic. This rubber seal fits the hinged (flip-up) fuel filler cap and creates a fuel...

Accelerator Cable for left-hand-drive applications, forming part of the throttle control linkage. The cable connects the accelerator pedal to the ...

Water-in-Fuel Sensor for the Td5 2.5L 5-cylinder turbo diesel fuel filter / sedimentor assembly. It threads into the base of the fuel filter housi...

Fuel Filter Cover Assembly - front cover for the chassis-mounted fuel filter and sedimentor on diesel engines, including the 200 TDi, 300 TDi and T...

Fuel Pipe - Pump to Engine for the Td5 diesel fuel delivery system. This under-body pipe assembly carries fuel from the in-tank pump forward to th...

Fuel Tank Sender Unit for the rear fuel tank. This sender unit mounts directly in the rear fuel tank and measures fuel level via a float and resis...

Fuel pump diesel replacement

Fuel Tank Cradle Support for the Discovery 2. This bracket forms part of the fuel tank cradle assembly, locating and supporting the fuel tank agai...

Coolant Hose for the engine cooling circuit, running between the radiator and the fuel cooler. On the 2.5L five-cylinder turbo-diesel (Td5), surplu...

Fuel Tank Pipe - a pipe assembly within the fuel supply system, connecting to the fuel tank. It carries fuel between the tank and the adjoining fu...

Fuel Sedimentor is a water and sediment trap in the diesel fuel supply line, installed upstream of the fuel filter and injection pump. Fuel passes...

Fuel Pump Cover for the Puma diesel engine. An inspection cover panel fitted to the engine front cover over the mechanical fuel pump drive area. Re...

HOSE-FILLER FUEL P38

Injector Bolt for the 2.2L Td4 (Puma) diesel fuel injection system. The bolt retains a fuel injector in its bore in the cylinder head, clamping th...

Fuel Pipe forms part of the low-pressure fuel supply circuit, carrying diesel from the fuel pump to the fuel filter. Fitted to the Td5 2.5L 5-cyli...

Fuel Tank - 45 Litre for the fuel storage system of the Defender 110. This 45-litre tank fits the standard under-body mounting position on Defende...

Fuel Pump for the 1.8L 4-cylinder petrol fuel delivery system. Mounted in the fuel tank, the pump draws fuel from the tank and delivers it under p...

Fuel Tank Sender Unit for petrol applications, mounted in the fuel tank as part of the fuel gauge circuit. A float arm rides on the fuel surface an...

Fuel Filter Assembly within the diesel fuel supply circuit, removing contaminants from the fuel before it reaches the injection system. Installed ...

Fuel tank 90 upto (V)AA243342

Fuel Tank Sensor is the fuel level sender unit for the Defender 110 and 130 petrol variants (excluding 6-cylinder engines). The sender is mounted ...

Fuel Cap closes and seals the fuel tank filler neck on petrol applications. It uses a two-lug bayonet fixing that locates and locks into the fille...

Drain Plug - Fuel Sedimentor

Fuel Pipe Kit - Td5 - Filter Head To Tank is a replacement section of the low-pressure fuel supply line running between the fuel filter head and th...

Fuel Filter is the cartridge-type filter in the diesel fuel supply circuit, mounted between the tank and the injection pump. It removes particulat...

Fuel Lift Pump for the 2.25-litre four-cylinder petrol engine, mounted on the side of the cylinder block and sitting in the fuel supply circuit bet...

Bolt securing the fuel injector and high-pressure fuel pipe assembly on the engine fuel system. It clamps the injector and high-pressure pipe unio...

Sealing Grommet seals the aperture in the fuel tank top face around the fuel pump or tank sender unit. It sits between the pump or sender flange a...

Fuel Injector Seal - Lower is the lower sealing ring fitted to the fuel injector, within the fuel injector and pipe assembly of the 4.4L V8 (AJ) pe...

Throttle Potentiometer Kit for the throttle body, operating within the engine fuel and throttle control system. The potentiometer is a rotary posi...

Fuel Tank Vent Hose - Puma TDCi

Hose - Connecting

Injector Washer Kit for the Td5 2.5L 5-cylinder turbo diesel - fuel injection system, injector-to-cylinder-head sealing. Each injector seals into ...

Fuel Tank Mounting Kit - Defender 110 & 130