Land Rover Fuel System Parts

Injector O-Ring for the 2.5L Td5 5-Cylinder Turbo Diesel fuel injection system. This O-ring seats in the groove on the injector body at the cylind...

Injector Sealing Washer seals the base of the fuel injector into the cylinder head on the Td5 2.5L 5-cylinder turbo diesel engine. The washer sits...

EDC switch Puma

Choke Clip is the retaining clip that secures the choke cable at the Zenith carburettor. Part of the choke cable installation, it anchors the oute...

Fuel System Seal Ring

Fuel Cap - Extra Tank - Military

Fuel Filler Cap - the cap that closes and seals the fuel tank filler neck. It screws onto the filler neck to seal the fuel system, retaining fuel ...

Spring Washer is an M8 double-coil spring washer used as a fastening component in body and chassis assemblies. The double-coil spring form maintai...

Carburettor Repair Kit for the six-cylinder petrol engine carburettor, supplying the renewable service parts used to overhaul the carburettor.

Fuel Tank Adaptor Ring secures the in-tank fuel pump and sender unit assembly into the aperture on the top of the fuel tank. The ring locks the pu...

Fuel Filter for the diesel fuel supply system of the 2.2L DW12 common-rail direct-injection turbo diesel engine. It is fitted in the fuel line betw...

Fuel Tank Vent Hose - part of the fuel tank ventilation circuit on Puma TDCi models. It carries fuel vapour from the tank, allowing the tank to br...

Fuel Filler Grommet seals the joint between the fuel tank filler neck and the body aperture, within the fuel filler assembly. The rubber grommet l...

Washer - Diesel Sedimentor is a sealing washer used in the diesel fuel sedimentor (fuel filter/water separator) assembly on diesel-engined Land Rov...

Coolant Hose connecting the radiator to the fuel cooler within the engine cooling circuit. It routes engine coolant to the coolant-cooled fuel coo...

Pump Injection Ring

Fuel Tank Mounting Washer is used at the fuel tank mounting points, spreading the clamping load of the fixing across the mounting bracket or strap....

Bolt securing the fuel injector and high-pressure fuel pipe assembly on the engine fuel system. It clamps the injector and high-pressure pipe unio...

O-Ring for the fuel injector harness assembly on the Td5 2.5L 5-Cylinder Turbo Diesel engine. This O-ring provides a seal within the fuel injector...

Fuel Tank Vent Hose - part of the fuel tank ventilation circuit, allowing the tank to breathe and equalise internal pressure as fuel level and temp...

Hose - Filler Pipe

Accelerator Rod in the throttle linkage. This rigid rod transmits accelerator pedal movement through the linkage to operate the engine throttle.

P-Clip - 19/64" x 3/8" is a pressed-steel P-profile retaining clip used to route and secure fuel lines, brake pipes, or wiring looms against a chas...

Fuel Injector Bolt - retaining bolt securing the fuel injector clamp to the cylinder head on the 2.4L Duratorq TDCi (Puma) common-rail diesel engin...

Sedimentor O-Ring for the diesel fuel filter assembly. This rubber sealing ring seals the sedimentor bowl against the filter head, preventing fuel...

Accelerator Cable for the Range Rover Classic 3.5L V8 carburettor engine, left-hand drive, manual transmission. This cable connects the accelerato...

Fuel Filter for the TD4 2.0L diesel engine fuel system. This filter element installs within the fuel filter housing in the engine bay fuel circuit...

Fuel Filler Seal - sealing ring fitted at the fuel filler, part of the fuel tank filler assembly. Seals the joint at the filler neck to prevent fu...

Washer

Protector for the fuel pipe system, fitted within the fuel pipes assembly on petrol applications. Used on Defender with 2.8L 6-cylinder BMW M52 pet...

Blanking Plug

Cap - Filler

Fuel Filter within the diesel fuel supply assembly. This filter traps particulate contamination in the fuel supply circuit before fuel reaches the...

Strap - Fuel Tank

Filler Pipe Securing Ring for the fuel filler pipe assembly. This retaining ring secures the fuel filler pipe to the fuel tank inlet, maintaining ...

Throttle Body Housing Seal seals the rear interface of the throttle body housing where it mates with the adjoining intake ducting, within the engin...

Throttle Seal for the intake throttle valve housing. It fits at the joint between the throttle body and the intake, maintaining an airtight connec...

Primary Fuel Filter for the diesel fuel supply system of the 2.0L I4 diesel (AJ200 / AJ20D4 / AJ21D4) engine. The primary filter separates water a...

rod control GENUINE LR - 2.25 petrol and 2.6 petrol, 1968 onwards

Diesel Fuel Filter Plug Seal - a sealing ring for the drain plug on the diesel fuel filter and sedimentor. It seals the drain/bleed plug against t...

Fuel Filter TD4

Injector Spill Pipe links the fuel injectors in the 2.5L 4-cylinder turbo diesel injection system. It returns leak-off (spill) fuel from the injec...

Fuel Pipe Clip retains and routes fuel delivery pipework within the fuel system, holding the lines securely in their intended position. It prevent...

Intake Elbow Seal for the 3.5L V8 twin-carburettor petrol engine. The seal sits between the air cleaner intake elbow and the carburettor intake to ...

Carburettor Overhaul Kit for the 2.25L four-cylinder petrol engine. The kit renews the perishable sealing and metering components of the carburetto...

Injector Bush for the VM 2.4L and 2.5L 4-cylinder turbo diesel engine in the Range Rover Classic. This bush is fitted at the cylinder head to loca...

Fuel Pipe - Tap to Tank - a fuel line in the low-pressure diesel supply circuit, running between the fuel tank and the fuel tap. It carries fuel f...