Land Rover Fuel System Parts

Injector sealing washer 2.4 Puma

Carburettor Manifold Gasket - the gasket that seals the inlet and exhaust manifold assembly to the cylinder head face on carburettor-fed engines. ...

Bowl Washer is the sealing joint washer for the fuel sediment bowl (sedimentor) in the fuel system. It seals the bowl to its housing, maintaining ...

Fuel Filter - the primary fuel filter in the low-pressure supply circuit of the 3.0L V6 diesel engine. Positioned between the fuel tank delivery l...

Fuel Sender Unit is the fuel level sender mounted in a metal fuel tank. A float-operated unit, it varies its electrical resistance with the fuel l...

Fuel Tank Sender mounts in the fuel tank and signals the fuel level to the dashboard gauge, forming part of the fuel level sensing circuit. A floa...

Past op  1958 - 61:   Sommige S 3 vanaf 1977 en 110 1983 - 84 All 3 Lug Internal Fixings

Fuel Pipe Olive

Water-in-Fuel Sensor for the Td5 2.5L 5-cylinder turbo diesel fuel filter / sedimentor assembly. It threads into the base of the fuel filter housi...

Nut - 10/32" UNF A nut with a #10-32 UNF (Unified National Fine) internal thread, run onto a matching UNF bolt or stud to clamp the joint.

Spill Rail for the 300 TDi fuel injection system. The spill rail links the leak-off unions at the top of the injectors and carries surplus fuel fro...

Carburettor Gasket Kit for the Zenith/Stromberg 175CD carburettor fitted to the 3.5L V8 petrol engine. The kit supplies the gaskets and seals need...

Fuel Filter Element - the replaceable filtration element in the diesel fuel supply circuit. Fitted to the 3.6L V8 TDV8 (Lion) diesel engine, the e...

Fuel Filter Element for the diesel fuel supply system. The element removes particulate contamination and separates water from the fuel before it re...

Fuel Connector Block for the Td5 2.5L 5-cylinder turbo diesel engine (Euro III, later specification). The block is the central junction of the fuel...

Fuel Tank Bolt - a mounting bolt that secures the fuel tank to the chassis. It fixes the tank at its mounting point and is specified for the metal...

Sealing Washer is a copper crush washer used to seal banjo and threaded union joints in the fuel system. Fitted at unions such as the injection pu...

Carburettor Torsion Spring is the return spring fitted to the throttle linkage of the Zenith carburettor on the 2.25L four-cylinder petrol engine. ...

Carburettor Spring - Solex - a spring used in the Solex carburettor of the 2.25 litre petrol engine, part of the fuel system. It supplies the spri...

Return Spring for Series hydraulic actuator and throttle control assemblies. This spring serves as a return spring in the hydraulic actuator assem...

Fuel Filter Holder - With Filter for the Defender Puma diesel fuel system. This complete filter assembly mounts in the engine bay fuel circuit and...

Fuel Tank Breather Hose for the fuel filler and tank ventilation circuit. Connects the fuel tank to the filler neck, venting the tank so that air ...

Carburettor Float for the Zenith 361V carburettor, part of the Fuel System assembly on Series petrol engines. The float rides on the fuel surface ...

Bolt - a hexagonal-head bolt with an M10 metric thread and a 30 mm length. A common general-purpose fastener used at fixing points across the suspe...

Sediment Retainer for the fuel lift pump glass sediment bowl - the clamp that secures the glass bowl to the underside of the pump. It holds the bo...

Fuel block connector assembly (+hoses) TD5 L318;L316

Fuel Tank Bolt - shouldered mounting bolt in the fuel tank support assembly, securing the tank mounting to the chassis outrigger. The plain should...

Bolt Fixing bolt, 3/8" UNF x 2-1/2", used to secure the rear fuel tank to the chassis.

Hose Clamp with a 10-16 mm clamping range. Used to secure rubber hoses at cooling, fuel, and fluid circuit connections on Land Rover vehicles.

Washer for the under-seat fuel tank front mounting assembly. This special-profile washer provides a secure bearing face at the front attachment po...

Fuel Tank Bolt secures the front mounting of the fuel tank to the chassis, for tanks mounted beneath the front seat. It clamps the tank's forward ...

Union Nut for the diesel fuel filter housing, part of the fuel supply circuit. The union nut secures a fuel feed pipe union to the filter housing,...

cable from accelerator pedal to cross shaft on military Series 3 diesel models

Fuel Pipe Sealing Washer seals the fuel pipe union at the DPA diesel injection pump. Fitted at the union connection, it is compressed between the ...

Fuel Pipe - Filter to Injection Pump for the Defender 300TDi 2.5L diesel (non-EGR). This pipe carries filtered diesel from the fuel filter housing...

Fuel Filter Head is the housing top of the fuel filter assembly within the diesel fuel supply system, onto which the filter element mounts. The he...

Fuel Filler Hose

Past op 90 2.5L TD5 diesel modellen vanaf (VIN) WA159807 on

Fuel Tank Sender is the in-tank fuel level sensing unit within the fuel gauge circuit, for V8 applications. Mounted inside the fuel tank, a float ...

Fuel Filler Neck Seal for the fuel filler assembly on the Defender. This rubber seal fits at the joint of the fuel filler neck, sealing the connec...

Fuel Tank Sender for the rear-mounted fuel tank on long-wheelbase diesel applications. The sender unit fits into the top of the fuel tank, where a...

Fuel Tank Drain Plug - the threaded plug that seals the drain point at the base of the fuel tank. Removing it allows the tank to be drained for se...

Fuel Connector Block Gasket for the Td5 2.5L five-cylinder diesel engine, sealing the fuel connector block to the engine within the fuel pressure r...

Service Filter Kit for the 300 Tdi 2.5L turbo diesel engine, grouping the consumable filters and sealing washers required for a routine engine serv...

Fuel Tank Outrigger - front right-hand chassis outrigger supporting the fuel tank on the short-wheelbase 88" chassis. Welded to the chassis frame,...

Fuel Pump Drive Belt Kit for the 3.0L V6 diesel engine, renewing the belt that drives the high-pressure fuel pump at the rear of the engine. The k...

Bolt - M8 x 40mm standard metric hex-head fastener for use across engine, gearbox, body, and chassis assembly applications.

Switch - Fuel Tank Tap is an electrical switch used to operate the fuel tap selection on Land Rover Series I, Series II, Series IIA, and Series III...