for Discounts / VAT
for Discounts & Correct VAT
Land Rover fuel system parts for Td5, TDV6, SDV6, Puma and Series-era engines. Common rail platforms run rail pressure up to 2,700 bar, so injectors, high-pressure pumps and regulators are precision components where the right specification matters more than the price tag. Stocked across our Dutch warehouse network for next-day EU dispatch.
Injection Pump - the fuel injection pump at the heart of the diesel fuel delivery system. Driven off the engine timing gears, the pump draws fuel ...
View full detailsInjection Pump - 300 TDi - with Immobiliser - the diesel fuel injection pump for the 2.5L 300 TDi four-cylinder turbo diesel engine, mounted at the...
View full detailsInjection pump Freelander 2ltr reconditioned EXCHANGE
Fuel Pressure Sensor A sensor in the fuel injection system that measures the pressure of the fuel delivered to the injectors and reports it to the ...
View full detailsCold Start Solenoid for the carburettor cold-start enrichment circuit on the V8 petrol carburettor induction system. The solenoid operates the col...
View full detailsFuel Rail for the 2.7 Td6 common-rail diesel fuel system. The fuel rail is a high-pressure manifold that receives fuel from the high-pressure pump ...
View full detailsFuel Tank Sender Unit for the Defender 90 main fuel tank. The sender unit mounts inside the fuel tank and uses a float arm and variable resistor t...
View full detailsFuel Sender Cover - the tank-top closure over the fuel sender aperture, incorporating the in-tank fuel filter, part of the fuel tank sender and mou...
View full detailsFuel Pump - in-tank pump and sender unit with integral filter, part of the fuel tank pump, sender and mountings group. The unit lifts diesel from ...
View full detailsIn-Tank Fuel Pump mounted inside the fuel tank as part of the fuel delivery system. The pump draws fuel from the tank and delivers it under pressu...
View full detailsFuel Injector and Sensor Assembly for the 2.5L six-cylinder M51 turbo diesel, part of the diesel fuel injection circuit. The assembly is supplied ...
View full detailsFuel tank guard in aluminium, part of the underbody protection group. It mounts beneath the fuel tank and shields it from rock strike and impact d...
View full detailsHigh-Pressure Fuel Injection Pump for the 2.0L GTDi turbocharged petrol engine. This engine-mounted pump raises fuel to the high pressure required ...
View full detailsFuel Pressure Regulator for the right-hand cylinder bank of the 4.4L DOHC V8 turbo diesel (TDV8) engine, supplied with its valve. Regulates pressu...
View full detailsFuel Pressure Sensor mounts on the common-rail fuel system and measures fuel pressure in the rail. It reports rail pressure to the engine control ...
View full detailsFuel Injector for the 2.2L Td4 common-rail diesel fuel injection system. The injector meters and atomises high-pressure diesel into the combustion ...
View full detailsFuel Pump and Sender - in-tank fuel pump and level sender unit, mounted in the fuel tank as part of the fuel delivery assembly. The electric pump ...
View full detailsFuel Pump Module is the in-tank unit that draws fuel from the tank and delivers it under pressure to the engine fuel rail. The module carries the ...
View full detailsFuel Injector Nozzle & Holder for the 2.2L 16V four-cylinder turbo diesel (Puma) engine. The injector delivers atomised fuel into the combustio...
View full detailsInjector Pipe is the number-one high-pressure fuel line, carrying fuel from the common rail to the first injector on the 2.4L Duratorq-TDCi HPCR tu...
View full detailsFuel Pump for the 2.0L TIVCT turbocharged petrol engine - the in-tank fuel pump and sender unit. Mounted inside the fuel tank, it draws fuel and d...
View full detailsFuel Pump for the direct-injection fuel supply of the 2.0L GTDI turbocharged petrol engine. Engine-mounted and camshaft-driven, it raises fuel to ...
View full detailsFuel Injector for the 3.0L AJ20D6 Ingenium six-cylinder diesel engine in high-output specification, part of the high-pressure common rail fuel inje...
View full detailsFuel Pressure Regulator - fitted to the fuel rail in the injector supply circuit. It controls the fuel pressure delivered to the injectors, holdin...
View full detailsFuel Injector for the multi-point fuel injection system, mounted in the inlet manifold with its nozzle directed at the back of the inlet valve. Th...
View full detailsFuel Rail Pressure Sensor for the 2.2L turbo diesel common-rail fuel system. Mounted on the fuel supply manifold (fuel rail), it measures the pres...
View full detailsFuel Tank Guard in 6 mm alloy - underbody protection panel for the fuel tank. The fuel tank sits low under the rear overhang, one of the most expo...
View full detailsFuel Pipe in the fuel supply system of the 2.5L four-cylinder diesel engine. It routes fuel through the supply circuit on installations fitted wit...
View full detailsFuel Injection Pump Assembly for the 2.7L V6 TDV6 (Lion) diesel engine, forming the high-pressure stage of the common-rail fuel injection system. ...
View full detailsFuel Injector - high-pressure common-rail injector for the 2.0L AJ21D4 Ingenium diesel, mid power output. The injector is clamped into the cylinde...
View full detailsInjector Retainer - injector clamp for the 2.2L Td4 common-rail diesel engine. The retainer clamps the fuel injector into its bore in the cylinder...
View full detailsWater Sensor Repair Kit Header Only
Fuel Injector for the 4.4L V8 SDV8 diesel engine, forming part of the common-rail fuel injection system. The injector delivers atomised diesel und...
View full detailsFuel Injector for the 3.0L V6 diesel engine (TDV6/SDV6). The injector delivers atomised, high-pressure diesel into the combustion chamber under ma...
View full detailsFuel Injector for the common-rail diesel fuel system. The injector delivers atomised, high-pressure fuel into the cylinder under electronic contro...
View full detailsFuel Injector for the 4.0L V6 petrol engine. An electronically actuated port injector that meters and atomises fuel into the intake tract under en...
View full detailsFuel Pump and Sender Assembly - the in-tank fuel delivery module for petrol applications. It combines the electric fuel pump, the in-tank strainer ...
View full detailsFuel Pump and Sender Unit for the in-tank fuel delivery module, right-hand side. This assembly houses the fuel pump that draws diesel from the tan...
View full detailsFuel Rail is the common-rail fuel supply manifold on the 2.2L turbo-diesel (Puma) engine. It stores high-pressure fuel delivered by the injection ...
View full detailsInjector Pipe No 4 is a high-pressure fuel pipe in the common-rail injection system of the 2.4L Duratorq TDCi (Puma) diesel engine. It carries fue...
View full detailsInjector Seal Kit for the 2.7 TDV6 common-rail diesel injectors. Contains the injector washer, O-ring and clip required to reseal one injector int...
View full detailsFuel Injector Refit Kit - the seals and retainer required when removing and refitting a fuel injector on 3.0L V6 and 5.0L V8 supercharged petrol en...
View full detailsFuel Pump Cover Gasket for the engine-mounted high-pressure fuel pump on the 2.0L turbocharged direct-injection petrol engine. Seals the joint bet...
View full detailsFuel Injection Kit for the 3.6L V8 32V DOHC EFI Diesel (Lion) engine. This kit replaces the fuel injectors and their associated high-pressure conn...
View full detailsWater-in-Fuel Sensor fitted to the diesel fuel filter. It detects water that separates from the fuel and collects in the base of the filter, signa...
View full detailsCarburettor (left-hand) for the 3.5L V8 twin-carburettor petrol engine. The carburettor meters fuel into the incoming air stream to form the combu...
View full detailsFuel Filler Hose connecting the filler neck to the fuel tank. It carries fuel from the filler point into the tank during refuelling. Fitted to 2.8...
View full detailsFuel Injector for the common-rail diesel fuel system. The injector delivers atomised, high-pressure fuel into the cylinder under electronic contro...
View full detailsCategory Overview
The Land Rover fuel system splits into a low-pressure supply stage and a high-pressure injection stage on every diesel from the Td5 onwards. Tank-mounted lift pumps feed the high-pressure pump, the rail holds fuel under pressure until the injectors meter it into the cylinders, and excess fuel returns to the tank via the regulator and cooler. Petrol Series and Range Rover V8 platforms use simpler mechanical or electric supply systems with no high-pressure stage, but the same buying logic applies: the supply circuit and the filtration upstream of it set the lifetime of every component downstream.
Different generations fail in different places. On the Td5 (Discovery 2 and Defender), the in-tank lift pump degrades acoustically before it fails outright, and the fuel pressure regulator block on the rear of the cylinder head leaks diesel internally as the seal hardens. On the Discovery 3 and Range Rover Sport L320 parts catalogue, the 2.7 TDV6 (276DT) runs a Bosch high-pressure pump that is mechanically distinct from the 3.0 TDV6 (306DT) used on the Discovery 4 and Range Rover L405 parts. Discovery 4 restricted-performance events are commonly traced to rail-pressure deviation rather than ignition or boost faults. Freelander 2 2.2 TD4 owners learn the post-filter-change priming requirement the hard way the first time they replace a fuel filter without a manual bulb.
The component categories on this page reflect those failure patterns. Filtration changes are usually paired with pump or injector replacement, since contaminated filters are the leading wear driver on common-rail systems. Injector work pairs with new copper washers and seals every time, because reused seals are the most common cause of post-repair leakage. Regulator work on the Td5 is a fuel-system job, not a sump job, even though the visible symptom is a diesel puddle at the rear of the engine block.
Component Reference| Component | Function | Common failure indicator |
|---|---|---|
| In-tank lift pump | Low-pressure supply from tank to high-pressure pump | Whining noise (Td5 in particular), slow priming, erratic supply pressure |
| High-pressure pump (CP4 on modern common-rail platforms) | Delivers fuel to the common rail at operating pressure | Restricted Performance, difficult starting, rail pressure deviation codes |
| Fuel injectors (Bosch or Delphi) | Metered delivery to the combustion chamber | Rough running, white smoke, injector leak-off, ECU adaptation drift |
| Fuel filter | Protects high-pressure components from contamination | Restricted Performance mimicking pump failure; FL2 needs manual priming after replacement |
| Fuel pressure regulator | Maintains stable rail pressure | Td5 regulator block leaks diesel at the rear of the head; modern rail regulators trigger pressure deviation codes |
| Tank-side sender unit | Storage and level signal | Fuel smell, inaccurate gauge, lift pump failure on ageing petrol units |
Bosch's common-rail high-pressure pump technical reference documents the modular CP4 design used across modern diesel passenger-car platforms including Land Rover, with operating pressures from 1,800 to 2,700 bar depending on the variant.
Pre-purchase checks that prevent the most common ordering mistakes on Land Rover fuel system work.
Fuel system repairs are most economical when paired by labour group, not by single-component swap. Common pairings observed across the Discovery 3 and Discovery 4 parts catalogues, Defender Td5 service work, and Freelander 2 maintenance:
Covers the 5-step fuel diagnostic flow for Td5, TDV6 and Puma engines, including P0087 and P0190 fault code triage.
Land Rover crank no start fuel diagnosticExplains why Discovery 4 Restricted Performance is not always a fuel-system fault and how to triage between DPF, EGR, sensor and fuel-pressure causes before ordering parts.
Discovery 4 DPF blocked causes and fixesOEM and aftermarket fuel filters across the Td5, TDV6, SDV6, DW12 and Puma diesel range.
Land Rover fuel filtersVDO in-tank pumps, sensors and instrumentation, widely used on Td5 and other Land Rover diesels.
VDO Land Rover fuel system partsTiming kits, gaskets, pumps and internal engine components across all Land Rover and Range Rover diesel and petrol platforms.
Land Rover engine partsDefender parts catalogue covering the Td5 generation, where the regulator block and in-tank lift pump are common fuel system wear items. Filter to Td5 in the collection above.
Defender parts for the Td5 eraDiscovery 2 Td5 parts catalogue. Use the engine variant filter to narrow to Td5-specific fuel system components.
Discovery 2 partsFreelander 2 catalogue covering the 2.2 TD4 (DW12) and SD4 fuel system components, including the post-filter-change priming consumables.
Freelander 2 partsRestricted Performance is most often triggered by rail pressure deviation, which itself is most often caused by a blocked fuel filter, a worn high-pressure pump, or a leaking injector. A diagnostic scan returning P0087 or P0190 narrows the cause to rail pressure low or rail pressure sensor circuit respectively, but the underlying part is usually in the fuel system rather than the sensor itself. Modern common-rail systems operate at pressures up to 2,700 bar (Bosch CP4 reference), and a few hundred bar of deviation is enough to set the warning.
Yes. The Freelander 2 2.2 TD4 has no internal primer. A manual priming bulb is required to pull fuel through the new filter before cranking. Dry-cranking the engine to prime risks damaging the high-pressure pump, which is the most expensive part in the system.
Yes, but the new injector carries a classification code on its top that must be coded into the ECU for the specific cylinder it serves. Without coding, the ECU's per-cylinder fuel trim drifts and the same fault codes recur. Single-injector replacement is acceptable mechanically; uncoded single-injector replacement is not.
Whining noise from the rear of the vehicle is the earliest sign. Hard starting and intermittent non-start follow as the pump degrades further. The Td5 in-tank pump tends to give acoustic warning weeks or months before outright failure, so a noisy pump should be planned for replacement rather than waited out.
Yes. Incorrect or unstable fuel delivery from one or more injectors causes rail pressure to fluctuate, which sets Restricted Performance on TDV6 and SDV6 platforms. Leaking injector seals can also drop rail pressure directly. Limp mode caused by injectors usually shows alongside rough running or misfire at idle.
Yes, every time. Reused copper washers and injector seals are the leading cause of post-repair leakage and rail pressure loss. The seal kit is a fraction of the price of the injector and should be ordered with every injector replacement.
Air is trapped in the system. Common-rail diesels need the fuel circuit re-primed before the high-pressure pump can build rail pressure. On the Freelander 2 a manual priming bulb is needed; on other platforms the in-tank lift pump primes the system if the ignition is cycled before cranking. Cranking the engine to prime risks high-pressure pump damage.
Updated: 17 May 2026