Land Rover Fuel System Parts

joint washer, various applications, mostly BMW engines. L322 - Oil Pan/Oil Level Indicator M62 B44 4.4 V8 Petrol L322 - Oil Pan/Oil Level Indicato...

Inlet Manifold Seal seals the joint between the inlet manifold and the throttle body within the air intake system. Fitted to the 2.2L TDCi (Td4) d...

Fuel System Ring - O-ring seal for the fuel injection pump on the 2.2L Puma diesel engine. The O-ring seals a joint on the fuel injection pump bod...

Fuel Sediment Bowl for the fuel system on Series II, IIA, and III Land Rovers, including the 101 Forward Control. The glass bowl mounts below the f...

P-Clip for routing and securing engine-bay pipework. Clamps the fuel pipes of the 4-cylinder carburettor petrol engine and the evaporative loss (E...

Fuel Injector - fuel injection system, cylinder head. Td5 2.5L 5-cylinder turbo diesel. The Td5 uses electronic unit injectors: each injector sits...

Fuel Pipe Assembly - part of the fuel delivery circuit for the carburettor V8. It carries fuel from the fuel supply line to the SU carburettors, fe...

EGR Cooler Gasket - seals the exhaust gas recirculation (EGR) cooler to its mating flange in the EGR circuit, preventing leakage of recirculated ex...

Injector Dowel Ring for the fuel injection system of the 2.5L 200 TDi engine. This locating dowel positions the injector correctly in the cylinder...

Fuel Pipe Olive is a compression ferrule used to seal a rigid fuel pipe union. The olive is compressed onto the pipe by the union nut to form a le...

Bolt - a small-diameter bolt with a 2BA (British Association) thread and a 5/8" length. Used as a light-duty fixing for small fittings and electric...

Fuel Tank Outrigger is a rear chassis outrigger forming part of the body & chassis assembly. It welds to the main chassis rail to support the ...

Valve - Control

Service Kit - 2.7L TDV6 for routine servicing of the 2.7 litre TDV6 diesel engine. This kit contains the consumable parts for a full service: an o...

Nyloc Locknut - M6 - M6 hex nyloc (nylon insert) locknut. The nylon insert grips the bolt thread to resist loosening under vibration without requi...

Fuel Injector - Nozzle and Holder Assembly for the 2.4L Duratorq-TDCi HPCR 140PS Puma diesel engine, part of the high-pressure common-rail injectio...

Cold Start Injection Hose - part of the fuel injection system, within the injector and pipe assembly. It feeds fuel to the cold start injector, whi...

Throttle body with integrated actuator motor for the 2.2L DW12 common-rail diesel engine. Mounted in the intake tract ahead of the inlet manifold,...

Hand Throttle Cable is the secondary throttle control cable, operated by a hand control rather than the accelerator pedal. It holds the throttle l...

Carburettor Conversion Kit for the fuel system of the 2.25L four-cylinder petrol engine built to Detox (EGR) emission-control specification. The k...

Accelerator Pedal is the driver's throttle input, mounted in the cab footwell against the bulkhead. The pedal pivots on its bracket and operates t...

Accelerator Cable Dutch Lightweight Diesel

O-ring OEM BOSCH

Fuel Injector for the Td5 2.5L 5-cylinder turbo diesel engine. The Td5 uses electronic unit injectors, one per cylinder, seated in the cylinder hea...

Fuel Injector for the fuel injection system of the 2.5L 200 TDi diesel engine (reconditioned). The injector atomises high-pressure diesel delivere...

Carburettor meters the air and fuel supplied to the 2.5L petrol engine, mounting on the inlet manifold at the head of the fuel system. It is a twi...

Carburettor for the 2.25L 4-cylinder petrol engine, mounting on the inlet manifold to meter the air and fuel mixture drawn into the cylinders. Thi...

Carburettor Insulator - 2-Barrel is the heat-isolating spacer block fitted between the 2-barrel carburettor and the inlet manifold. The insulator ...

Fuel Injector for the 3.5L V8 EFI petrol engine. Meters fuel into the intake port as part of the electronic fuel injection system. For non-catalys...

Injector O-Ring (Large) - the larger of the two sealing O-rings fitted to each fuel injector, sealing the injector into the fuel rail. Fitted to t...

Needle Jet for the Solex 175 CD constant-velocity carburettor. The needle jet meters fuel around the tapered jet needle as it rises and falls with ...

Fuel Gauge - dash-mounted instrument forming part of the vehicle's electrical instrumentation. Displays the fuel tank contents from the variable-r...

Fuel Injector for the high-pressure common rail fuel injection system on the 2.7 TDV6 diesel engine. The injector mounts in the cylinder head and d...

Fuel Pump - remote-mounted electric fuel pump from the fuel delivery system. Unlike an in-tank unit it mounts externally, downstream of the tank p...