Land Rover Turbo, Intake & Manifolds

What do Land Rover turbo, intake and manifold parts cover?

This collection covers turbochargers and their actuators, oil lines and hoses, intercooler and boost hoses, air intake ducts and hoses, inlet manifolds and supercharger parts, and engine breather and vacuum hoses for Land Rover and Range Rover models. It is one of the subcategories of Land Rover engine parts, where most inlet manifold and turbocharger gaskets are listed with the other engine gaskets.

Parts here are listed for the Land Rover Series, Land Rover Defender, Land Rover Discovery, Land Rover Freelander and Range Rover families, from parts for Series 2.25 litre engines to parts for the 2.0 litre turbo petrol and diesel engines of later models. Use the Land Rover parts catalogues to confirm the part number for your vehicle.

Land Rover turbochargers, actuators and oil lines, including Defender, Discovery and Range Rover

Turbochargers are listed as complete assemblies and as a turbocharger cartridge. Titles name engines from the 200Tdi, 300Tdi and Td5 to the 2.4 Duratorq, 2.2 TDCi, TDV6, 3.6 TDV8, 4.4 V8 diesel and 3.0 V6 diesel, and 2.0 litre turbochargers are listed for petrol and diesel engines. Some titles add a side or position, such as LH, RH or Primary, including the LH and RH 3.6 TDV8 turbochargers listed for the Range Rover Sport L320. Some 300Tdi turbochargers are titled With Mid Manifold, so check what each listing includes.

Turbo brands listed include Garrett, BorgWarner, Mitsubishi and Melett, alongside Genuine Land Rover turbochargers. The Garrett turbochargers are also grouped on the Garrett turbo parts page.

Actuator parts are listed separately: a wastegate actuator titled for the 200Tdi, a turbocharger actuator titled for the 2.2 litre diesel and a turbo actuator repair kit. Diverter solenoid valves from Pierburg are listed as well.

Turbo oil feed pipes, oil drain pipes and oil return hoses are listed with titles that include the 200Tdi, 300Tdi, 2.2 Puma and 2.0 litre petrol, together with a turbocharger oil feed filter and turbo O-rings. Coolant hoses and pipes to the turbocharger are in Land Rover coolant and radiator hoses, with the other coolant hoses.

Intercooler, turbo and boost hoses, including Freelander 2 and silicone kits

Intercooler hoses and charge air hoses connect the turbocharger, the intercooler and the inlet manifold, and turbo hoses and boost pipes are listed as well. Many titles give the position, such as turbo to intercooler, intercooler to inlet manifold, upper, lower, LH or RH. Titles name engines including the 200Tdi, 300Tdi, Td5, 2.4 TDCi, 2.7 TDV6 and 3.6 TDV8, and Freelander 2 parts include intercooler hoses and an intercooler hose repair kit titled Less Metal Pipe.

Silicone hose kits are listed from Terrafirma and other brands. Most are titled by engine and some by the number of pieces, such as a 3-piece 300Tdi kit and a 4-piece Td5 kit. Some Defender 2.2 Td4 kits are titled Early or Late, so check which applies to your engine. Kit contents differ, so check each listing for the hoses it includes.

Air intake ducts, hoses and air box parts

Many air intake hoses, air cleaner hoses, air ducts and intake pipes run between the air cleaner and the turbocharger, the carburettor, the throttle body or the inlet manifold, depending on the engine. Titles name engines from the 2.25 litre and the V8 twin carburettor and EFI engines to the 300Tdi, Td5, 2.0 litre petrol, 3.0 V6 diesel and 5.0 V8 petrol.

Air box parts include a hi-clearance alloy air box lid, ram air intakes with mesh grilles, air intake grilles and a Td5 air cleaner to airflow meter seal. A raised air intake and a raised air intake cleaner top are listed here too. Most mass air flow (MAF) and MAP sensors are listed in Land Rover electrical parts rather than here.

Land Rover inlet manifolds and intake parts, including Discovery 4 and Range Rover superchargers

Many inlet manifolds are titled by engine, including the 2.25 litre petrol listed for the Series, the 2.5 TDi, the 3.6 TDV8 (LH and RH) and the 3.0 V6 diesel, and TD4 inlet manifolds are listed for the Defender and the Freelander 2. Inlet manifolds for the 3.0 V6 diesel are listed for the Discovery 4 and Discovery 5, some of them in aluminium. An inlet manifold fitting kit for the 3.0 TDV6, an inlet manifold gasket kit, plenum hoses for V8 engines and an intake manifold motor are listed as well.

Supercharger kits, a supercharger actuator repair kit, a supercharger air duct and symposers are listed for supercharged petrol engines. These titles do not name the engine, so check the part number. Most throttle body assemblies are listed in Land Rover fuel system parts rather than here.

Engine breather and vacuum hoses

Breather hoses are listed for the crankcase, rocker cover and camshaft cover, together with flame trap hoses, oil separator drain hoses, a 300Tdi cyclone hose and a silicone breather hose kit. Titles name engines including the 300Tdi, Td5, 2.2 TD4, 2.5 KV6 and 4.4 V8: the 2.2 TD4 hose is listed for the Freelander 2, and the 4.4 V8 hoses for the 4.4 V8 petrol. Most oil separators and PCV valve kits are listed under Land Rover Engine Parts.

Vacuum hoses include wastegate and turbo modulator control hoses, some brake servo vacuum hoses, a vacuum reservoir and a symposer vacuum hose. Most brake vacuum pumps are listed in Land Rover brake kits and servo parts rather than here.

Buying guide: Genuine, OEM and aftermarket turbo and intake parts

Genuine turbo and intake parts carry the Land Rover part number. OEM turbo and intake parts come from original-equipment manufacturers. Aftermarket also covers value and off-road brands.

Budget Parts lists Genuine, OEM and aftermarket options in this collection. The available quality tier varies by part, so check the individual product listing when comparing options.

Assembly, cartridge or repair kit. Read the title to see whether a listing is a complete turbocharger, a turbocharger cartridge, an actuator or an actuator repair kit.

Kits or single hoses. Silicone hose kits and single hoses are listed side by side. A kit covers several hoses in one order, so check which hoses the listing includes.

Gaskets and O-rings. Check each listing for whether gaskets are included. Most inlet manifold and turbocharger gaskets are listed under Land Rover Engine Parts, and turbo O-rings are listed here.

Before you order

1. Start with the engine. Many turbo, hose and manifold parts are listed by engine, and one model can have parts listed for more than one engine, so check the engine code or engine size first. TD4 and Td4 titles appear on parts for several different engines and models, so check the model and engine size as well.
2. Match the side and position. Check LH or RH, upper or lower, primary, and positions such as turbo to intercooler or intercooler to inlet manifold where the title gives them.
3. Check what a kit includes. Silicone kits differ in the number of pieces, some Defender 2.2 Td4 kits are titled Early or Late, and some 300Tdi turbochargers are titled With Mid Manifold.
4. Check for gaskets and O-rings. Most inlet manifold and turbocharger gaskets are listed under Land Rover Engine Parts; turbo O-rings are listed here.
5. Quote the VIN with any fitment enquiry. Give the full VIN or chassis number exactly as it appears on the vehicle. It lets a part number that changed during a model's production be checked against your vehicle.

Looking for something else?

Technical guides

Frequently asked questions