for Discounts / VAT
for Discounts & Correct VAT
Parts for the Range Rover Evoque L538, covering all variants from 2011 to 2019 including the 5-door, 3-door, and convertible. Covers pre-facelift and post-facelift specifications. Stock is held in the Netherlands and dispatched across the EU. Use the filters to narrow by model year, category, or quality grade.
Drive Belt Tensioner Pulley for the auxiliary (accessory) drive belt. The pulley bears against the drive belt, maintaining correct tension as the ...
View full detailsValve Stem Seal - valve train sealing component in the cylinder head of the 2.2L Td4 diesel engine. The seal fits over the valve stem at the top o...
View full detailsFront suspension bump stop - part of the front strut and coil spring assembly. The moulded rubber bump stop is fitted over the strut piston rod, b...
View full detailsTransmission Oil Cooler for the 6-speed AWF21 automatic gearbox. Dissipates heat from the automatic transmission fluid to keep the gearbox within ...
View full detailsOil Pump for the 2.2L DW12 diesel engine, part of the engine lubrication system. Driven from the crankshaft, it draws oil from the sump and delive...
View full detailsClutch Slave Cylinder Assembly Concentric (hydraulic) clutch slave cylinder for the six-speed manual gearbox. Mounted concentrically around the ge...
View full detailsRear Brake Caliper, supplied without brake pads. The caliper houses the piston that clamps the brake pads against the disc under hydraulic pressur...
View full detailsRear Brake Caliper, left-hand side, supplied without brake pads. The caliper houses the piston that clamps the brake pads against the disc under h...
View full detailsWheel Hub for the rear axle assembly. The hub mounts to the rear suspension upright and carries the road wheel and brake disc on its machined flan...
View full detailsThrottle Body Assembly for the 2.0L Si4 240PS turbocharged petrol engine, mounted in the air intake tract between the intake ducting and the inlet ...
View full detailsVibration Damper is the lower anti-vibration element for the rear shock absorber, part of the rear suspension assembly. It fits at the base of the...
View full detailsFront Splash Guard for the left-hand front wheelhouse. The moulded guard lines the inner wheel arch, shielding the surrounding bodywork and underb...
View full detailsStarter Motor for the 2.2L Td4 diesel engine (DW12), part of the engine starting system. It cranks the engine through a pinion that engages the ri...
View full detailsTransmission Shaft Sleeve for the AWF21 six-speed automatic transmission on all-wheel-drive applications. The sleeve houses and locates the transm...
View full detailsHaldex Service Kit for the fourth-generation Haldex coupling used in the all-wheel-drive driveline. The Haldex coupling is mounted at the front of...
View full detailsRadiator is the engine coolant radiator for 2.2L diesel applications. It dissipates heat from the engine coolant as it flows through the core, mai...
View full detailsWater Pump - Fuel-Fired Heater for the auxiliary fuel-fired heater coolant circuit on 2.0L AJ200 petrol applications. This electrically driven circ...
View full detailsOil Cooler, part of the engine lubrication system. It draws heat out of the engine oil to hold oil temperature within its operating range under su...
View full detailsBrake Caliper is the rear brake caliper within the rear disc brake assembly. It houses the hydraulic piston and carries the brake pads; under brak...
View full detailsBrake Caliper is the rear brake caliper within the rear disc brake assembly. It houses the hydraulic piston and carries the brake pads; under brak...
View full detailsCrankshaft Pulley mounts on the front of the crankshaft of the 2.0L 16V Ti-VCT turbocharged petrol engine (240PS). It transfers drive from the cra...
View full detailsOil Filter Element and Seal
Camshaft Sprocket is a timing-drive gear in the valve train of the 2.0L Ingenium diesel engine (AJ200D). Mounted on the end of the camshaft, it is...
View full detailsTailgate Strut - gas-pressurised support strut for the luggage compartment door (tailgate). The strut counterbalances the weight of the tailgate, ...
View full detailsOil Cooler dissipates heat from the engine oil to help maintain a stable oil operating temperature. Fitted in the lubrication circuit of the 2.0L ...
View full detailsTransmission Sleeve Kit
Cap Fuel Rrsport, Rrevo - Discovery 3, Discovery 4
Engine Oil Pan - the sump casing that closes the bottom of the cylinder block on the 2.2L 16V common-rail diesel (DW12) and forms the engine's oil ...
View full detailsAlternator Assembly - the belt-driven charging unit that supplies the vehicle's electrical system and recharges the battery while the engine runs. ...
View full detailsShaft Assembly - Drive - Drive Shaft and Hub
Coupling Pump is the electro-hydraulic pump that operates the rear axle all-wheel-drive coupling, generating the hydraulic pressure that engages th...
View full detailsDifferential and Carrier
Shaft Assembly - Drive - RH
Wiper Blade - Front - LHD - RH for the front windscreen wiper assembly. It clips to the wiper arm and clears the driver's sweep area of the windscr...
View full detailsFront Shock Absorber - the left-hand front damper in the suspension system. It controls the movement of the front left suspension, damping spring ...
View full detailsFront Wheelhouse Splash Shield lines the inner front wheel arch, separating the wheelhouse from the surrounding body and underbody components. It ...
View full detailsFront Brake Caliper for the left-hand side, part of the front disc brake assembly. The caliper mounts over the front brake disc and houses the hyd...
View full detailsBrake Caliper for the right-hand front, part of the front disc brake assembly. It mounts over the brake disc and houses the hydraulic pistons and ...
View full detailsTransmission Sleeve - an external component of the M66 six-speed manual transmission, fitted during assembly or repair of the gearbox's external fi...
View full detailsFront Brake Hose for the left-hand side - the flexible section of the front brake hydraulic line that connects the rigid brake pipe on the body to ...
View full detailsRadiator Top Hose for the engine cooling system of the 2.0L TIVCT turbocharged petrol engine. Carries heated coolant from the engine outlet to the...
View full detailsManifold Absolute Pressure (MAP) Sensor mounted on the inlet manifold, part of the engine management system on the 2.0L 16-valve turbocharged petro...
View full detailsThermostat and Housing for the 2.0L 16V Ti-VCT petrol engine, supplied complete as a sealed assembly. It sits in the engine cooling circuit and reg...
View full detailsSteering Rack Connecting Rod (inner tie rod) in the steering linkage. It threads onto the end of the steering rack and connects to the outer tie ro...
View full detailsBolt and Washer is a fastener set used at the rear cross member and stabiliser bar mounting. It secures the stabiliser (anti-roll) bar and its ass...
View full detailsSensor Assembly
Water Pump for the engine cooling circuit. The pump circulates coolant through the cylinder block, cylinder head and radiator to maintain engine op...
View full detailsAir Conditioning Compressor Plug is a plug fitted at the air conditioning compressor within the vehicle air conditioning system.
Parts for the Range Rover Evoque L538, covering all variants from 2011 to 2019 including the 5-door, 3-door, and convertible, this collection covers pre-facelift and post-facelift specifications. If you own the 2019-onward Evoque, see the L551 parts collection.
The Range Rover Evoque L538 is the first-generation Evoque, produced at Halewood, UK from July 2011 to 2019 under chassis code L538. Model years run from 2012 to 2019. The collection covers the 5-door and 3-door SUV variants (produced through to 2018) and the convertible (produced from 2016 to 2019).
The L538 rides on the D8 platform, also known as LR-MS, a high-strength steel monocoque architecture developed by Land Rover as a heavily modified derivative of the Ford EUCD base. The D8 platform is also used on the Land Rover Discovery Sport. This architecture gives the Evoque a car-like driving character distinct from the body-on-frame and aluminium-intensive platforms used in other Range Rover generations.
Drivetrain configuration varies by variant. Four-wheel drive vehicles use a Haldex-based on-demand AWD system. Front-wheel drive was available on select diesel variants, specifically the eD4, which used a single-clutch, front-axle-only setup for improved efficiency. Confirming your drivetrain before ordering driveline, coupling, or differential components is essential. Generation-specific Haldex AWD service information is published by Haldex.
This collection does not cover the Range Rover Evoque L551 (2019 onward). If your vehicle was registered from 2019 onward, use the L551 parts collection linked in the intro above this product grid.
The L538 production run splits into two distinct specifications at the 2015 model year.
Pre-facelift vehicles (model years 2012 to 2015) used Ford-derived powerplants. Petrol variants used the 2.0L Ford EcoBoost Si4 turbo four-cylinder. Diesel variants used the 2.2L Ford Duratorq (PSA DW12) in TD4 and SD4 states of tune. The automatic gearbox on pre-facelift vehicles is the 6-speed Ford Aisin AW F-21 unit, also designated the Aisin Warner TF-81SC.
Post-facelift vehicles (model years 2016 to 2019) introduced JLR's Ingenium engine family. Both petrol and diesel variants moved to the 2.0L Ingenium turbo four-cylinder. The 9-speed ZF 9HP automatic gearbox replaced the 6-speed unit on automatic variants. The 6-speed Getrag M66EH50 manual remained available in select markets on diesel variants throughout the production run.
Engine-specific parts including oil filters, timing components, gaskets, sensors, and turbo components are not interchangeable between the Ford-derived and Ingenium specifications. Always confirm your engine code and model year before ordering.
Reference note: ZF 9HP transmission technical information is published by ZF Group.
Fitment GuidanceThe most reliable method for confirming parts fitment on an L538 is your Vehicle Identification Number (VIN). The VIN is a 17-character code stamped on the door jamb plate, on the windscreen base near the A-pillar (driver or passenger side depending on market variant), and recorded in your V5C or national registration document.
The tenth character of the VIN encodes the model year. The eighth character encodes the engine variant. If you are ordering engine-specific parts, turbo components, gearbox parts, or any item that changed at the 2015 facelift, cross-referencing your VIN with the part number is strongly recommended before purchase.
If you are unsure which specification your vehicle is, contact the Budget Parts team directly. Trade account holders can request fitment confirmation through the wholesale portal.
Catalogue ScopeThis collection includes suspension parts such as control arms, bushings, drop links, anti-roll bars, shock absorbers, and wheel bearings. Brake parts include pads, discs, calipers, brake pipes, and brake hardware. Engine parts cover oil filters, sump washers, hydraulic tappets, expansion tank caps, and ancillary components. Drivetrain parts include propshaft bolts, driveshaft components, and wheel nuts. The collection also includes electrical parts such as relays and sensors, service and maintenance items including ATF fluids and service hardware, body and chassis fixings, and workshop supplies including brake cleaner and fastener assortments.
Use the category filter above to narrow results to your area of work. The quality filter allows you to select between Genuine Land Rover, OEM, and Aftermarket grades.
Quality TiersEvery part in this collection is marked with one of three quality grades.
Genuine Land Rover parts are sourced through the official Jaguar Land Rover distribution channel. They carry the original Land Rover part number and packaging. These are the appropriate choice when OEM provenance documentation is required, such as for warranty or insurance purposes.
OEM parts are produced by the same manufacturers that supply Land Rover directly, sold outside the official JLR channel. The component is frequently identical to the Genuine part. OEM is the standard choice for independent workshops and experienced owners who want original-specification quality without the official channel markup.
Aftermarket parts are independently manufactured. Quality varies by supplier and application. Each listing specifies the grade, and the product description notes any relevant fitment or application limitations. Aftermarket is appropriate for non-critical components or where cost is the primary constraint.
TradeBudget Parts operates a wholesale portal for registered independent workshops and trade buyers across the EU. The portal provides trade pricing and account-based ordering. If you manage a workshop or operate as a parts buyer, visit the wholesale login page to access trade terms or register your account.
Generation ReferenceThe L538 is the first-generation Evoque. The second-generation Evoque, the L551, entered production in 2019 on the PTA platform with 48V mild-hybrid technology and Ingenium engines throughout. Parts are not interchangeable between generations.
For the full Range Rover model family and generation reference, see the Range Rover parts collection.
Technical GuidesThe articles below provide diagnostic and technical context relevant to Range Rover Evoque L538 owners and workshops. They support, but do not duplicate, the parts categories in this collection.
Technical guide to the L538 covering the Ford-to-Ingenium engine split, Haldex service requirements, and the suspension and platform architecture that defined the first-generation Evoque.
Range Rover Evoque L538 guide →Owner and workshop guide to the Evoque convertible covering the structural changes for the open-roof configuration, the electric roof system, AWD configuration, and common faults relevant to parts selection.
Range Rover Evoque convertible guide →The Freelander 2 shares Haldex AWD architecture and overlapping engine families with the Evoque L538. This guide covers Haldex service intervals, coupling failure patterns, and rear differential diagnosis that applies directly to L538 AWD variants.
Freelander 2 faults and Haldex service guide →The Range Rover Evoque L538 was produced from July 2011 to 2019. Model years run from 2012 to 2019. The 5-door and 3-door SUV variants were produced through to 2018. The convertible variant was introduced in 2016 and produced through to 2019. Parts availability in this collection covers the full L538 production window across all body styles.
If your vehicle was registered before 2019, it is almost certainly the L538 first generation. If registered from 2019 onward, it is the L551 second generation. The clearest confirmation is your VIN. The tenth character of your 17-character VIN encodes the model year. You can also check the driver's door jamb plate, which will show the build date and in some markets the chassis code. If you are unsure, contact Budget Parts directly before ordering.
The L538 was significantly updated at the 2015 model year. Pre-facelift vehicles use Ford-derived engines (2.0L EcoBoost petrol, 2.2L Duratorq diesel) and a 6-speed Aisin automatic gearbox. Post-facelift vehicles use JLR Ingenium engines (2.0L petrol and diesel) and a 9-speed ZF 9HP automatic. Engine-specific parts including oil filters, timing components, turbo components, and gaskets are not interchangeable between these specifications. Always confirm your model year and engine code before ordering.
Four-wheel drive variants of the L538 use an on-demand Haldex AWD system. This couples the rear axle electronically and distributes torque when front-axle slip is detected. Some diesel variants were available in front-wheel drive only, specifically the eD4, which does not use a rear differential or Haldex coupling at all. Confirming your drivetrain configuration before ordering rear axle, coupling, or propshaft components is important. If you are unsure, check your V5C or contact Budget Parts.
The L538 used two engine families across its production run. Pre-facelift vehicles (2012 to 2015 model year) used the 2.0L Ford EcoBoost Si4 turbo petrol and the 2.2L Ford Duratorq (PSA DW12) diesel in TD4 and SD4 outputs. Post-facelift vehicles (2016 to 2019 model year) used JLR's 2.0L Ingenium turbo four-cylinder in both petrol and diesel forms. Parts that are engine-specific are listed with applicable engine codes in the product descriptions.
The L538 uses the D8 platform, also known as the LR-MS. This is a high-strength steel monocoque architecture developed by Land Rover as a substantially redesigned derivative of the Ford EUCD base. The same platform underpins the Land Rover Discovery Sport. It is a different architecture to the aluminium-intensive platforms used on the Range Rover L405 and Range Rover Sport L494.
Yes. Budget Parts operates a wholesale portal for registered workshops and trade buyers across the EU. The portal provides trade pricing and account-based ordering. You can register or log in through the wholesale portal link in the site header. For volume orders or specific part enquiries, contact the Budget Parts team directly.
Updated: 13 May 2026