for Discounts / VAT
for Discounts & Correct VAT
Parts for the Range Rover Evoque L538, covering all variants from 2011 to 2019 including the 5-door, 3-door, and convertible. Covers pre-facelift and post-facelift specifications. Stock is held in the Netherlands and dispatched across the EU. Use the filters to narrow by model year, category, or quality grade.
Wiper Blade - Front - LHD - RH for the front windscreen wiper assembly. It clips to the wiper arm and clears the driver's sweep area of the windscr...
View full detailsRear Stop and Flasher Lamp for the left-hand side of the rear lamp assembly. This lamp unit combines the brake (stop) light and the direction indi...
View full detailsFront Shock Absorber - the left-hand front damper in the suspension system. It controls the movement of the front left suspension, damping spring ...
View full detailsFront Shock Absorber - the left-hand front damper in the suspension system. It controls the movement of the front left suspension, damping spring ...
View full detailsShock Absorber - RH is the right-hand rear damper in the rear suspension. It mounts between the rear axle and the body to control spring oscillati...
View full detailsShock Absorber for the rear suspension, right-hand side. The damper controls spring oscillation at the rear axle, absorbing road inputs so the whee...
View full detailsShock Absorber - RH is the right-hand rear damper in the rear suspension. It mounts between the rear axle and the body to control spring oscillati...
View full detailsFront Shock Absorber - the left-hand front damper in the suspension system. It controls the movement of the front left suspension, damping spring ...
View full detailsFront Shock Absorber - the left-hand front damper in the suspension system. It controls the movement of the front left suspension, damping spring ...
View full detailsShock Absorber - Front - LH
Front Shock Absorber for the left-hand side of the front suspension. It damps spring oscillation to control body movement and keep the tyre in cont...
View full detailsFront Wheelhouse Splash Shield lines the inner front wheel arch, separating the wheelhouse from the surrounding body and underbody components. It ...
View full detailsFront Shock Absorber for the right-hand side of the front suspension. It damps spring oscillation to control body movement and keep the tyre in con...
View full detailsShock Absorber - LH
Rear Crosslink arm forming part of the rear multi-link suspension assembly. The crosslink controls lateral location of the rear wheel hub carrier,...
View full detailsFront Fog Lamp for the left-hand side, LED type. The fog lamp mounts in the front bumper valance and provides low, wide forward illumination to im...
View full detailsFront Fog Lamp for the right-hand side, LED type. The fog lamp mounts in the front bumper valance and provides low, wide forward illumination to i...
View full detailsFront Brake Caliper for the left-hand side, part of the front disc brake assembly. The caliper mounts over the front brake disc and houses the hyd...
View full detailsBrake Caliper for the right-hand front, part of the front disc brake assembly. It mounts over the brake disc and houses the hydraulic pistons and ...
View full detailsTrailing Arm - Rear LH - F2
Trailing Arm for the rear suspension, left-hand (near-side), part of the rear multi-link axle assembly. The trailing arm locates the rear wheel ca...
View full detailsTrailing Arm for the rear suspension, right-hand (off-side), part of the rear multi-link axle assembly. The trailing arm locates the rear wheel ca...
View full detailsTow Rope Recovery towing rope for on- and off-road vehicle recovery, connecting a casualty vehicle to a recovery vehicle. It is supplied with a st...
View full detailsShaft - Front Axle
Transmission Sleeve - an external component of the M66 six-speed manual transmission, fitted during assembly or repair of the gearbox's external fi...
View full detailsTransmission Oil Cooler Hose for the automatic transmission fluid cooling circuit. The hose carries automatic transmission fluid between the gearb...
View full detailsFront Brake Hose for the left-hand side - the flexible section of the front brake hydraulic line that connects the rigid brake pipe on the body to ...
View full detailsEGR Outlet Gasket for the exhaust gas recirculation (EGR) system of the 2.0L AJ200-series four-cylinder diesel engine. Seals the outlet joint of t...
View full detailsFront Brake Hose for the hydraulic braking circuit. Flexible hose that carries brake fluid from the rigid chassis-mounted brake line to the front ...
View full detailsRadiator Top Hose for the engine cooling system of the 2.0L TIVCT turbocharged petrol engine. Carries heated coolant from the engine outlet to the...
View full detailsRear Crankshaft Oil Seal for the 2.0L AJ200-series four-cylinder engine, in both petrol and diesel applications. Seals the rear of the crankshaft ...
View full detailsEGR Inlet Gasket for the exhaust gas recirculation (EGR) system of the 2.0L AJ200-series four-cylinder diesel engine. Seals the inlet joint of the...
View full detailsExhaust Pipe Gasket for the exhaust system of the 2.0L AJ200-series four-cylinder diesel engine. Seals the flanged joint between exhaust pipe sect...
View full detailsManifold Absolute Pressure (MAP) Sensor mounted on the inlet manifold, part of the engine management system on the 2.0L 16-valve turbocharged petro...
View full detailsManifold Absolute Pressure (MAP) Sensor mounted on the inlet manifold, part of the engine management system on the 2.0L 16-valve turbocharged petro...
View full detailsBonnet Latch – left-hand (LH) side, part of the bonnet locking mechanism at the front of the vehicle. The latch engages the bonnet striker to hold...
View full detailsCV Boot Kit - Rear A repair kit for the constant-velocity (CV) joint boot on the rear driveshaft, part of the rear axle drive assembly. The CV boo...
View full detailsLambda Sensor - Exhaust Gas - Middle An exhaust gas oxygen (lambda) sensor fitted at the middle sensor position in the exhaust system. It measures ...
View full detailsBonnet Alarm Switch The bonnet position switch for the vehicle security and anti-theft system. It is mounted at the bonnet latch and detects whethe...
View full detailsPollen Filter The cabin air filter for the heating, ventilation and air conditioning (HVAC) system. It is fitted in the fresh-air intake housing, u...
View full detailsThermostat and Housing for the 2.0L 16V Ti-VCT petrol engine, supplied complete as a sealed assembly. It sits in the engine cooling circuit and reg...
View full detailsThermostat and Housing for the 2.0L 16V Ti-VCT petrol engine, supplied complete as a sealed assembly. It sits in the engine cooling circuit and reg...
View full detailsSteering Rack Connecting Rod (inner tie rod) in the steering linkage. It threads onto the end of the steering rack and connects to the outer tie ro...
View full detailsExhaust Manifold Gasket for the 2.2L CR DI 16V (Td4) turbo diesel engine. It seals the joint between the exhaust manifold and the turbocharger, con...
View full detailsEngine Oil Filter for the 2.0L 16V Ti-VCT petrol engine. It sits in the engine lubrication circuit, filtering the oil delivered by the oil pump to ...
View full detailsEngine Oil Drain Plug for the 2.0L 16V Ti-VCT petrol engine. It threads into the drain point at the base of the oil sump, sealing the lubrication s...
View full detailsSensor Assembly
Oil Pan Sealing Ring is a seal used at the oil pan (sump) of the 2.2L diesel engine, within the lubrication system. It maintains an oil-tight join...
View full detailsParts for the Range Rover Evoque L538, covering all variants from 2011 to 2019 including the 5-door, 3-door, and convertible, this collection covers pre-facelift and post-facelift specifications. If you own the 2019-onward Evoque, see the L551 parts collection.
The Range Rover Evoque L538 is the first-generation Evoque, produced at Halewood, UK from July 2011 to 2019 under chassis code L538. Model years run from 2012 to 2019. The collection covers the 5-door and 3-door SUV variants (produced through to 2018) and the convertible (produced from 2016 to 2019).
The L538 rides on the D8 platform, also known as LR-MS, a high-strength steel monocoque architecture developed by Land Rover as a heavily modified derivative of the Ford EUCD base. The D8 platform is also used on the Land Rover Discovery Sport. This architecture gives the Evoque a car-like driving character distinct from the body-on-frame and aluminium-intensive platforms used in other Range Rover generations.
Drivetrain configuration varies by variant. Four-wheel drive vehicles use a Haldex-based on-demand AWD system. Front-wheel drive was available on select diesel variants, specifically the eD4, which used a single-clutch, front-axle-only setup for improved efficiency. Confirming your drivetrain before ordering driveline, coupling, or differential components is essential. Generation-specific Haldex AWD service information is published by Haldex.
This collection does not cover the Range Rover Evoque L551 (2019 onward). If your vehicle was registered from 2019 onward, use the L551 parts collection linked in the intro above this product grid.
The L538 production run splits into two distinct specifications at the 2015 model year.
Pre-facelift vehicles (model years 2012 to 2015) used Ford-derived powerplants. Petrol variants used the 2.0L Ford EcoBoost Si4 turbo four-cylinder. Diesel variants used the 2.2L Ford Duratorq (PSA DW12) in TD4 and SD4 states of tune. The automatic gearbox on pre-facelift vehicles is the 6-speed Ford Aisin AW F-21 unit, also designated the Aisin Warner TF-81SC.
Post-facelift vehicles (model years 2016 to 2019) introduced JLR's Ingenium engine family. Both petrol and diesel variants moved to the 2.0L Ingenium turbo four-cylinder. The 9-speed ZF 9HP automatic gearbox replaced the 6-speed unit on automatic variants. The 6-speed Getrag M66EH50 manual remained available in select markets on diesel variants throughout the production run.
Engine-specific parts including oil filters, timing components, gaskets, sensors, and turbo components are not interchangeable between the Ford-derived and Ingenium specifications. Always confirm your engine code and model year before ordering.
Reference note: ZF 9HP transmission technical information is published by ZF Group.
Fitment GuidanceThe most reliable method for confirming parts fitment on an L538 is your Vehicle Identification Number (VIN). The VIN is a 17-character code stamped on the door jamb plate, on the windscreen base near the A-pillar (driver or passenger side depending on market variant), and recorded in your V5C or national registration document.
The tenth character of the VIN encodes the model year. The eighth character encodes the engine variant. If you are ordering engine-specific parts, turbo components, gearbox parts, or any item that changed at the 2015 facelift, cross-referencing your VIN with the part number is strongly recommended before purchase.
If you are unsure which specification your vehicle is, contact the Budget Parts team directly. Trade account holders can request fitment confirmation through the wholesale portal.
Catalogue ScopeThis collection includes suspension parts such as control arms, bushings, drop links, anti-roll bars, shock absorbers, and wheel bearings. Brake parts include pads, discs, calipers, brake pipes, and brake hardware. Engine parts cover oil filters, sump washers, hydraulic tappets, expansion tank caps, and ancillary components. Drivetrain parts include propshaft bolts, driveshaft components, and wheel nuts. The collection also includes electrical parts such as relays and sensors, service and maintenance items including ATF fluids and service hardware, body and chassis fixings, and workshop supplies including brake cleaner and fastener assortments.
Use the category filter above to narrow results to your area of work. The quality filter allows you to select between Genuine Land Rover, OEM, and Aftermarket grades.
Quality TiersEvery part in this collection is marked with one of three quality grades.
Genuine Land Rover parts are sourced through the official Jaguar Land Rover distribution channel. They carry the original Land Rover part number and packaging. These are the appropriate choice when OEM provenance documentation is required, such as for warranty or insurance purposes.
OEM parts are produced by the same manufacturers that supply Land Rover directly, sold outside the official JLR channel. The component is frequently identical to the Genuine part. OEM is the standard choice for independent workshops and experienced owners who want original-specification quality without the official channel markup.
Aftermarket parts are independently manufactured. Quality varies by supplier and application. Each listing specifies the grade, and the product description notes any relevant fitment or application limitations. Aftermarket is appropriate for non-critical components or where cost is the primary constraint.
TradeBudget Parts operates a wholesale portal for registered independent workshops and trade buyers across the EU. The portal provides trade pricing and account-based ordering. If you manage a workshop or operate as a parts buyer, visit the wholesale login page to access trade terms or register your account.
Generation ReferenceThe L538 is the first-generation Evoque. The second-generation Evoque, the L551, entered production in 2019 on the PTA platform with 48V mild-hybrid technology and Ingenium engines throughout. Parts are not interchangeable between generations.
For the full Range Rover model family and generation reference, see the Range Rover parts collection.
Technical GuidesThe articles below provide diagnostic and technical context relevant to Range Rover Evoque L538 owners and workshops. They support, but do not duplicate, the parts categories in this collection.
Technical guide to the L538 covering the Ford-to-Ingenium engine split, Haldex service requirements, and the suspension and platform architecture that defined the first-generation Evoque.
Range Rover Evoque L538 guide →Owner and workshop guide to the Evoque convertible covering the structural changes for the open-roof configuration, the electric roof system, AWD configuration, and common faults relevant to parts selection.
Range Rover Evoque convertible guide →The Freelander 2 shares Haldex AWD architecture and overlapping engine families with the Evoque L538. This guide covers Haldex service intervals, coupling failure patterns, and rear differential diagnosis that applies directly to L538 AWD variants.
Freelander 2 faults and Haldex service guide →The Range Rover Evoque L538 was produced from July 2011 to 2019. Model years run from 2012 to 2019. The 5-door and 3-door SUV variants were produced through to 2018. The convertible variant was introduced in 2016 and produced through to 2019. Parts availability in this collection covers the full L538 production window across all body styles.
If your vehicle was registered before 2019, it is almost certainly the L538 first generation. If registered from 2019 onward, it is the L551 second generation. The clearest confirmation is your VIN. The tenth character of your 17-character VIN encodes the model year. You can also check the driver's door jamb plate, which will show the build date and in some markets the chassis code. If you are unsure, contact Budget Parts directly before ordering.
The L538 was significantly updated at the 2015 model year. Pre-facelift vehicles use Ford-derived engines (2.0L EcoBoost petrol, 2.2L Duratorq diesel) and a 6-speed Aisin automatic gearbox. Post-facelift vehicles use JLR Ingenium engines (2.0L petrol and diesel) and a 9-speed ZF 9HP automatic. Engine-specific parts including oil filters, timing components, turbo components, and gaskets are not interchangeable between these specifications. Always confirm your model year and engine code before ordering.
Four-wheel drive variants of the L538 use an on-demand Haldex AWD system. This couples the rear axle electronically and distributes torque when front-axle slip is detected. Some diesel variants were available in front-wheel drive only, specifically the eD4, which does not use a rear differential or Haldex coupling at all. Confirming your drivetrain configuration before ordering rear axle, coupling, or propshaft components is important. If you are unsure, check your V5C or contact Budget Parts.
The L538 used two engine families across its production run. Pre-facelift vehicles (2012 to 2015 model year) used the 2.0L Ford EcoBoost Si4 turbo petrol and the 2.2L Ford Duratorq (PSA DW12) diesel in TD4 and SD4 outputs. Post-facelift vehicles (2016 to 2019 model year) used JLR's 2.0L Ingenium turbo four-cylinder in both petrol and diesel forms. Parts that are engine-specific are listed with applicable engine codes in the product descriptions.
The L538 uses the D8 platform, also known as the LR-MS. This is a high-strength steel monocoque architecture developed by Land Rover as a substantially redesigned derivative of the Ford EUCD base. The same platform underpins the Land Rover Discovery Sport. It is a different architecture to the aluminium-intensive platforms used on the Range Rover L405 and Range Rover Sport L494.
Yes. Budget Parts operates a wholesale portal for registered workshops and trade buyers across the EU. The portal provides trade pricing and account-based ordering. You can register or log in through the wholesale portal link in the site header. For volume orders or specific part enquiries, contact the Budget Parts team directly.
Updated: 13 May 2026