Range Rover Evoque Parts

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

Manifold to Cylinder Head Stud secures the exhaust manifold and turbocharger assembly to the cylinder head. Threaded mounting stud used in the exh...

Camshaft Sprocket Washer for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It fits at the camshaft sprocket within the timing...

Inlet Valve for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It seats in the cylinder head as part of the valve train. The ...

Inlet Valve for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It seats in the cylinder head as part of the valve train. The ...

Camshaft Spacer for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It locates in the camshaft sprocket and timing gear area. ...

Oil Pump Drive Sprocket for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It drives the engine oil pump through the oil pump ...

Cylinder Head Gasket seals the cylinder head to the engine block on the 2.0L Ingenium four-cylinder diesel engine (AJ200 series). It seals the com...

Cylinder Head Gasket seals the cylinder head to the engine block on the 2.0L Ingenium four-cylinder diesel engine (AJ200 series). It seals the com...

Exhaust Pipe Gasket for the front exhaust section of the 2.0L turbocharged petrol engine. Seals the flanged front pipe to catalyst joint, providin...

Valve Stem Seal Set for the 2.0L 16V petrol engine, supplied as a set of eight seals. Valve stem seals fit at the top of the valve guides in the c...

CV Boot Kit for the inner constant-velocity joint of the front driveshaft. The boot seals the inner CV joint, retaining its grease and keeping out ...

Engine Coolant Temperature Sensor for the 2.0L 16V petrol engine. It threads into the thermostat housing and measures coolant temperature, signalli...

Oil Drain Plug for the 2.0L 16V petrol engine. It seals the drain point in the oil pan (sump) and is removed to drain the engine oil at a service.

Water Outlet Connector for the 2.0L 16V turbocharged petrol engine. It mounts at the water pump outlet and connects the coolant hoses that route co...

Engine Coolant Temperature Sensor for the 2.0L 16V petrol engine. It threads into the thermostat housing and measures coolant temperature, signalli...

Timing Gear Bolt for the 2.0L 16V petrol engine. It secures a gear on the engine's timing drive.

Valve Spring Retainer for the 2.0L 16-valve turbocharged petrol engine, fitted in the cylinder head valve train. The retainer caps the top of the ...

Crankshaft Damper Washer for the 2.0L 16-valve turbocharged petrol engine, fitted in the crankshaft damper assembly at the front of the timing gear...

Crankshaft Damper Washer for the 2.0L 16-valve turbocharged petrol engine, fitted in the crankshaft damper assembly at the front of the timing gear...

Crankshaft Damper Washer for the 2.0L 16-valve turbocharged petrol engine, fitted in the crankshaft damper assembly at the front of the timing gear...

Drive Chain Idler - timing gear idler sprocket for the 2.0L four-cylinder Ingenium engine family (AJ200 / AJ20 series, petrol and diesel). The idl...

Oil Filter Adaptor Gasket for the 2.0L 16-valve turbocharged petrol engine, sealing the oil cooler and filter adaptor to the engine. The gasket fo...

Oil Filter Adaptor Gasket for the 2.0L 16-valve turbocharged petrol engine, sealing the oil cooler and filter adaptor to the engine. The gasket fo...

Accessory Drive Pulley Bolt for the 2.0L 16-valve turbocharged petrol engine, used in the accessory drive belt system. The bolt secures the access...

Throttle Body Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the throttle body and the inlet manifold. It mai...

Inlet Manifold Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the inlet manifold and the cylinder head. It ma...

Cylinder Head Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the cylinder head and the engine block. It conta...

Transmission Oil, SAE 75W, meeting specification BOT 352, supplied in a 1 L bottle. For the 6-speed manual transmission (M66) and, on hybrid appli...

Transmission Oil, SAE 75W, meeting specification BOT 352, supplied in a 1 L bottle. For the 6-speed manual transmission (M66) and, on hybrid appli...

Windscreen Washer Reservoir stores the washer fluid supply for the screen wash system and, on this variant, the headlamp power wash jets. This res...

Engine Mounting Bolt with hexagonal head, M12 x 112 mm. A structural fastener securing the engine mounting to the subframe; the same bolt is also ...

Engine Mounting Bolt with hexagonal head, M12 x 112 mm. A structural fastener securing the engine mounting to the subframe; the same bolt is also ...

Upper Knuckle Bolt is a hex-head bolt that retains the upper knuckle joint within the hub and knuckle assembly. It clamps the upper knuckle to the...

Upper Knuckle Bolt is a hex-head bolt that retains the upper knuckle joint within the hub and knuckle assembly. It clamps the upper knuckle to the...

Shock Absorber Top Mount for the front strut assembly. The top mount secures the upper end of the front strut to the vehicle body, isolating suspe...

Shock Absorber Top Mount for the front strut assembly. The top mount secures the upper end of the front strut to the vehicle body, isolating suspe...

Anti-Roll Bar Link connects the front anti-roll bar (stabiliser bar) to the suspension. Mounted between the anti-roll bar end and the suspension s...

Bump Stop for the front suspension. Mounted on the damper, the bump stop cushions the end of suspension travel, absorbing the impact as the wheel ...

Sensor - Ride Height - Air Suspension

Sensor - Ride Height - Air Suspension

Ride Height Sensor monitors the front right-hand corner of the suspension for the vehicle's ride height and damping control systems. Mounted betwe...

Front Brake Disc - internally vented, 325mm diameter, supplied singly. The disc bolts to the front hub and forms the friction surface for the fron...

Door Mirror Cover - exterior housing cover for the right-hand door mirror assembly, forming the outer shell of the mirror body. Supplied primed an...

Bolt for the front suspension, used at the suspension arm, front cross member and stabilizer bar fixings. M14 x 85mm.

Bolt securing the front suspension lower control arm at its rear fixing point. M14 x 90mm, Torx drive head.