for Discounts / VAT
for Discounts & Correct VAT
Range Rover Evoque parts for both production generations: the L538 (2011 to 2018) and the L551 (2019 to present), including the L538 Convertible (2016 to 2018). The compact Range Rover sits on a different mechanical lineage from its full-size siblings, with its own platform codes, engine families, and service patterns.
Both generations are dispatched from our Dutch warehouse network for EU delivery. Use the generation links below to enter the correct child collection, or read on for the L538-versus-L551 boundary and a VIN-check overview.
Air Conditioning Compressor for the 2.2L diesel engine. Driven by the auxiliary drive belt, it pressurises and circulates refrigerant through the a...
View full detailsEvaporator for the front air-conditioning system, housed within the HVAC unit behind the dashboard. Low-pressure liquid refrigerant expands as it ...
View full detailsDrive Shaft Coupling for the rear driveshaft, connecting the driveshaft to the driveline flange. The flexible coupling transmits drive while dampi...
View full detailsDifferential and Carrier
Power Transfer Unit is a driveline assembly, also known as the front axle case, in the transverse-engine all-wheel-drive system. Bolted to the tra...
View full detailsTurbocharger Actuator for the 2.2L diesel engine's forced-induction system. It adjusts the turbocharger's variable-geometry mechanism to regulate b...
View full detailsTurbocharger Assembly for the 2.2L diesel engine, part of the forced-induction system. Exhaust gas drives the turbine, which spins a compressor whe...
View full detailsTurbocharger Assembly for the 2.0L 16V TiVCT GTDI turbocharged petrol engine (240PS). The turbocharger forms part of the forced-induction system, r...
View full detailsTransmission Control Module is the electronic control unit that governs the ZF 9HP nine-speed automatic gearbox. It controls gear selection, shift ...
View full detailsDiesel Particulate Filter - the front catalyst and particulate filter unit of the exhaust aftertreatment system, for the 2.0L AJ200 Ingenium four-c...
View full detailsTurbocharger for the 2.0L AJ200 / AJ20D4 four-cylinder diesel engine. It sits in the forced-induction circuit between the exhaust manifold and the...
View full detailsTurbocharger for the 2.0L AJ200 / AJ20D4 four-cylinder diesel engine. It sits in the forced-induction circuit between the exhaust manifold and the...
View full detailsArm - Front Suspension - LH - L550 - L53
Shaft Assembly - Drive - RH
Arm - Front Suspension - LH - E1/DS1
Suspension Arm - Front - RH is the right-hand front lower suspension arm, locating the front hub carrier to the subframe and setting front wheel ge...
View full detailsSuspension Arm - Front - RH is the right-hand front lower suspension arm, locating the front hub carrier to the subframe and setting front wheel ge...
View full detailsRadius Arm and Left - Front - RH
Transmission Sleeve - an external component of the M66 six-speed manual transmission, fitted during assembly or repair of the gearbox's external fi...
View full detailsFront Brake Hose for the left-hand side - the flexible section of the front brake hydraulic line that connects the rigid brake pipe on the body to ...
View full detailsEGR Outlet Gasket for the exhaust gas recirculation (EGR) system of the 2.0L AJ200-series four-cylinder diesel engine. Seals the outlet joint of t...
View full detailsFront Brake Hose for the hydraulic braking circuit. Flexible hose that carries brake fluid from the rigid chassis-mounted brake line to the front ...
View full detailsRadiator Top Hose for the engine cooling system of the 2.0L TIVCT turbocharged petrol engine. Carries heated coolant from the engine outlet to the...
View full detailsRear Crankshaft Oil Seal for the 2.0L AJ200-series four-cylinder engine, in both petrol and diesel applications. Seals the rear of the crankshaft ...
View full detailsEGR Inlet Gasket for the exhaust gas recirculation (EGR) system of the 2.0L AJ200-series four-cylinder diesel engine. Seals the inlet joint of the...
View full detailsExhaust Pipe Gasket for the exhaust system of the 2.0L AJ200-series four-cylinder diesel engine. Seals the flanged joint between exhaust pipe sect...
View full detailsManifold Absolute Pressure (MAP) Sensor mounted on the inlet manifold, part of the engine management system on the 2.0L 16-valve turbocharged petro...
View full detailsManifold Absolute Pressure (MAP) Sensor mounted on the inlet manifold, part of the engine management system on the 2.0L 16-valve turbocharged petro...
View full detailsBonnet Latch – left-hand (LH) side, part of the bonnet locking mechanism at the front of the vehicle. The latch engages the bonnet striker to hold...
View full detailsCV Boot Kit - Rear A repair kit for the constant-velocity (CV) joint boot on the rear driveshaft, part of the rear axle drive assembly. The CV boo...
View full detailsLambda Sensor - Exhaust Gas - Middle An exhaust gas oxygen (lambda) sensor fitted at the middle sensor position in the exhaust system. It measures ...
View full detailsPollen Filter The cabin air filter for the heating, ventilation and air conditioning (HVAC) system. It is fitted in the fresh-air intake housing, u...
View full detailsThermostat and Housing for the 2.0L 16V Ti-VCT petrol engine, supplied complete as a sealed assembly. It sits in the engine cooling circuit and reg...
View full detailsThermostat and Housing for the 2.0L 16V Ti-VCT petrol engine, supplied complete as a sealed assembly. It sits in the engine cooling circuit and reg...
View full detailsSteering Rack Connecting Rod (inner tie rod) in the steering linkage. It threads onto the end of the steering rack and connects to the outer tie ro...
View full detailsExhaust Manifold Gasket for the 2.2L CR DI 16V (Td4) turbo diesel engine. It seals the joint between the exhaust manifold and the turbocharger, con...
View full detailsEngine Oil Filter for the 2.0L 16V Ti-VCT petrol engine. It sits in the engine lubrication circuit, filtering the oil delivered by the oil pump to ...
View full detailsEngine Oil Drain Plug for the 2.0L 16V Ti-VCT petrol engine. It threads into the drain point at the base of the oil sump, sealing the lubrication s...
View full detailsSensor Assembly
Oil Pan Sealing Ring is a seal used at the oil pan (sump) of the 2.2L diesel engine, within the lubrication system. It maintains an oil-tight join...
View full detailsGlow Plug is a heating element threaded into the cylinder head of the 2.2L CR DI diesel engine, forming part of the pre-heating system. One plug s...
View full detailsSensor Assembly
Sensor Assembly
Turbocharger Oil Feed Hose Seal in the turbocharger lubrication circuit. It seals the joint where the pressurised oil feed hose delivers engine oil...
View full detailsWater Pump for the engine cooling circuit. The pump circulates coolant through the cylinder block, cylinder head and radiator to maintain engine op...
View full detailsAir Conditioning Receiver Dryer sits on the high-pressure side of the air conditioning refrigerant circuit, downstream of the condenser. It holds ...
View full detailsAir Conditioning Compressor Plug is a plug fitted at the air conditioning compressor within the vehicle air conditioning system.
O-Ring - A/C Compressor seals the refrigerant line connection at the air conditioning compressor. It forms the gas-tight joint between the compres...
View full detailsGenerations Overview
The Evoque has two distinct generations. They share the Range Rover badge and the compact-SUV positioning, but they do not share platforms, do not share most major mechanical parts, and were built with different engine families.
| Generation | Chassis code | Production | Platform | Engine families |
|---|---|---|---|---|
| First generation | L538 | 2011 to 2018 | D8 (PTA precursor) | Ford-derived (early), Ingenium (2015 to 2016 model year refresh onwards) |
| Second generation | L551 | 2019 to present | PTA (Premium Transverse Architecture) | Ingenium MHEV and PHEV |
The two platforms are not interchangeable. An L538 suspension component is not an L551 suspension component, and a control arm sold for one will not fit the other. The same applies across braking, drivetrain, and most body-related parts. Always identify the generation before ordering.
The Range Rover Evoque L538 parts collection holds the catalogue for the first generation, including all 3-door, 5-door, and Convertible variants. The Range Rover Evoque L551 parts collection holds the catalogue for the second generation, including MHEV and PHEV variants.
Vehicle IdentificationThree identification questions cover most ordering errors at the parent-page stage. Resolve all three before adding parts to the cart.
If your Evoque was first registered between November 2011 and the end of 2018, it is an L538. If first registered in 2019 or later, it is an L551. The L538 carried over into early 2019 in some markets as remaining stock cleared, so registrations from January to March 2019 should be VIN-checked rather than year-checked.
The L538 came in 5-door, 3-door (also called Coupe), and Convertible variants. The Convertible was built only for the 2016 to 2018 model years (a two-year production run), and many of its body, weather-seal, and roof-mechanism parts are unique to that variant. The L551 came as 5-door only.
The L538 split mid-production. Cars built up to the 2014 model year carry Ford-derived engines; cars from the 2015 to 2016 model year refresh onwards carry JLR's Ingenium family. Oil specifications and service intervals differ between the two eras. The L551 is Ingenium-only across the full production run, with MHEV (mild hybrid) and PHEV (plug-in hybrid) variants from launch.
Both generations carry the 17-digit ISO 3779 VIN. The 10th digit identifies model year. Cross-check against the official Range Rover Evoque vehicle page on landrover.com if you need to confirm specification against current Land Rover documentation.
System-adjacency links into the component collections that the Evoque family draws from. Use these when you know the system you need but want to browse the broader category before filtering to your generation. Each component collection covers the full Land Rover and Range Rover range, so identify your Evoque generation first, then use the filter on the component collection to narrow to L538 or L551 fitment.
Control arms, bushings, and shock absorbers across both Evoque generations. Filter to L538 or L551 above the grid.
Land Rover suspension partsTiming components, sensors, and service items for the Ford-era and Ingenium-era Evoque powertrains. Filter to L538 or L551 above the grid.
Land Rover engine partsDiscs, pads, and EPB components across the Evoque range. Filter to L538 or L551 above the grid.
Land Rover brake partsRadiators, expansion tanks, water pumps, and hose assemblies. Filter to L538 or L551 above the grid.
Land Rover cooling partsSensors, modules, batteries, and lighting circuits. Filter to L538 or L551 above the grid.
Land Rover electrical partsThe Evoque parent sits underneath the wider Range Rover parts catalogue, which also covers Range Rover Classic, P38, L322, L405, L460, Sport, and Velar generations.
Technical GuidesIn-depth Evoque technical content covering generation specifics, variant identification, and service patterns.
The L538 split into two mechanically distinct eras at the 2015 to 2016 model year refresh, and the boundary affects engine, oil, and service-interval decisions for any L538 service job.
Read the full L538 technical guideThe L538 Convertible (2016 to 2018) shares its drivetrain with the hard-top L538 but carries unique structural reinforcement, an electric roof mechanism, and weather-seal architecture that the standard L538 does not.
Read the full Convertible variant guideThe Evoque Victoria Beckham Edition (L538 Si4) and the wider Si4 petrol range share the Aisin AWF21 transmission and second-generation Haldex AWD coupling, both of which have specific service patterns worth understanding before ordering parts.
Read the full Si4 service guideThe L538 (2011 to 2018) is the first-generation Evoque, built on the D8 platform with a body style range covering 5-door, 3-door, and Convertible variants. The L551 (2019 to present) is the second-generation Evoque, built on the PTA platform shared with Discovery Sport L550, and is 5-door only. The two generations do not share the platform, do not share engine families across the full production run, and most major mechanical and body parts are not interchangeable. Order parts for the correct generation: an L538 control arm will not fit an L551, and the reverse is also true.
No. The L538 and L551 are built on different platforms (D8 versus PTA), with different suspension geometry, different mounting points, and different fastener specifications across most assemblies. Engine families overlap only in the Ingenium 2.0 litre block at the broadest level, and even there the ancillary fitments (turbo specification, sensor positions, harness routing) differ between L538 Ingenium and L551 Ingenium installations. Treat the two generations as separate vehicles for parts purposes.
Yes. The L538 Convertible was produced for two model years (2016 to 2018) and shares its drivetrain with the hard-top L538, so most service and drivetrain parts are common with the standard L538 catalogue. Convertible-specific parts cover the electric roof mechanism, structural reinforcement, and weather seals. The 600 mm wading depth and Terrain Response system match the hard-top, so off-road service items also cross over. Convertible parts are stocked in our Range Rover Evoque L538 parts collection alongside the hard-top range.
Three checks settle it. First, the registration year: L538 covers November 2011 to end of 2018, L551 covers 2019 onwards (with a brief overlap in early 2019 as remaining L538 stock cleared). Second, the body style: 3-door and Convertible variants are L538-only. Third, the VIN: both generations carry the 17-digit ISO 3779 VIN, and the 10th digit identifies model year. For any car registered in early 2019, VIN-check rather than year-check.
Yes. Budget Parts operates a wholesale account system for independent workshops and trade buyers across European markets, with account-based ordering and direct technical support. Use the trade registration on the page below the product grid to apply, or contact us if you need account assistance.
Updated: 16 May 2026