for Discounts / VAT
for Discounts & Correct VAT
Range Rover Evoque parts for both production generations: the L538 (2011 to 2018) and the L551 (2019 to present), including the L538 Convertible (2016 to 2018). The compact Range Rover sits on a different mechanical lineage from its full-size siblings, with its own platform codes, engine families, and service patterns.
Both generations are dispatched from our Dutch warehouse network for EU delivery. Use the generation links below to enter the correct child collection, or read on for the L538-versus-L551 boundary and a VIN-check overview.
Exhaust Manifold Gasket for the 2.2L CR DI 16V (Td4) turbo diesel engine. It seals the joint between the exhaust manifold and the turbocharger, con...
View full detailsEngine Oil Filter for the 2.0L 16V Ti-VCT petrol engine. It sits in the engine lubrication circuit, filtering the oil delivered by the oil pump to ...
View full detailsGlow Plug is a heating element threaded into the cylinder head of the 2.2L CR DI diesel engine, forming part of the pre-heating system. One plug s...
View full detailsAir Conditioning Receiver Dryer sits on the high-pressure side of the air conditioning refrigerant circuit, downstream of the condenser. It holds ...
View full detailsOil Filter Gasket for the oil cooler and filter assembly. The gasket seals the oil filter housing against its mating face, maintaining the pressuri...
View full detailsCrossmember Insulator - Rear for the rear frame-to-body mounting. The insulator sits between the rear crossmember and the body structure, isolating...
View full detailsCrossmember Insulator - Front for the front frame-to-body mounting. The insulator sits between the front crossmember and the body structure, isolat...
View full detailsNut - M5 x 12mm is a threaded securing nut with an M5 thread. It is a multi-application fastener used across a range of body, door and electrical ...
View full detailsWheel Bearing Circlip - 51 mm retaining ring for the wheel hub bearing. Seats in the groove of the knuckle bore and locates the hub bearing axiall...
View full detailsBolt - Hexagon Head used in engine and interior fascia assembly applications. This hexagon head fastener is used in the EGR system assembly and in...
View full detailsHex Nut - M12 - a standard M12 hexagonal nut used as a general-purpose fastener across the vehicle. The six-sided form is tightened with a standar...
View full detailsO-Ring and Grease Kit for servicing the transfer box input shaft. Contains the input shaft O-ring and the anti-seize grease used when resealing th...
View full detailsFlanged Nyloc Nut, M10, a multi-purpose locking fastener used across the chassis and suspension. The nylon insert resists loosening under vibratio...
View full detailsExhaust Gasket sealing a flanged joint in the exhaust system on Land Rover and Range Rover models fitted with the 2.7L TDV6, 3.0D V6, 2.2D, and 4.4...
View full detailsRear Brake Pipe Clip retains and locates the rigid brake pipes along the rear of the chassis. It holds the brake lines securely against the chassi...
View full detailsExhaust Manifold for the 2.0L Ingenium (AJ200D / AJ20D4) four-cylinder diesel engine. The manifold bolts to the cylinder head exhaust ports and co...
View full detailsOil Pump Chain Tensioner for the 2.0L turbocharged direct-injection petrol engine. Maintains correct tension on the oil pump drive chain, taking u...
View full detailsCrankshaft Timing Gear for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It mounts on the nose of the crankshaft and drives t...
View full detailsFront Door Latch for the front side door, part of the door lock controls assembly. The latch engages the body-mounted striker to hold the door clo...
View full detailsOil Pump Chain is the drive chain for the engine oil pump on the 2.0L 16V turbocharged petrol engine. It transmits drive from the crankshaft to th...
View full detailsTiming Chain Tensioner Guide for the 2.0L 16V TIVCT petrol engine (Si4). The tensioner guide is the pivoting guide arm that the timing chain tensi...
View full detailsTiming Chain for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It forms part of the engine's timing drive, running between th...
View full detailsTiming Chain Guide for the 2.0L 16-valve turbocharged petrol engine, fitted in the timing gear assembly at the front of the engine. The guide loca...
View full detailsIntercooler Hose for the 2.2L common-rail turbo-diesel charge-air system. It routes pressurised charge air through the intercooler circuit, carryi...
View full detailsRear Door Latch for the rear side door, part of the door lock controls assembly. The latch engages the body-mounted striker to hold the door close...
View full detailsDoor Latch - Rear is part of the rear door locking mechanism. It secures the door to the body striker when closed and releases it when operated by...
View full detailsFront Door Latch - the latch and locking mechanism for a front door, part of the door lock controls. It secures the door to the striker on the body...
View full detailsDoor Latch - Front - LH
Front Door Latch - the latch and locking mechanism for a front door, part of the door lock controls. It secures the door to the striker on the body...
View full detailsRear Lamp, Stop and Flasher - rear lighting cluster section carrying the brake (stop) lamp and rear direction indicator functions. Mounts to the r...
View full detailsOil Filter filters the engine oil on the 2.0L 16V turbocharged petrol engine. Part of the oil cooler and filter assembly, it removes contaminants ...
View full detailsFuel Filter for the 2.0L Ingenium diesel engine (AJ200D / AJ20D4 / AJ21D4). The filter removes contaminants and water from the diesel fuel supply ...
View full detailsElectronic Exhaust Valve Actuator for the sports exhaust system, fitted to 2.0L AJ200 and AJ20P4 petrol engines. The actuator drives the exhaust b...
View full detailsNOx Trap Temperature Sensor is an exhaust gas temperature sensor within the diesel exhaust aftertreatment system, mounted in the exhaust stream at ...
View full detailsHub Nut - M24 x 2.0 for wheel hub and bearing retention. This M24 x 2.0 metric hub nut secures the wheel hub or halfshaft flange onto the stub axl...
View full detailsTransfer Case Support bracket that carries the intermediate bearing of the front axle drive shaft where the shaft runs from the transfer case. It ...
View full detailsBolt - Hexagon Head used in engine and interior fascia assembly applications. This hexagon head fastener is used in the EGR system assembly and in...
View full detailsFront Axle Drive Shaft transmits torque from the front differential output to the front wheel hub, forming part of the front driveline assembly. T...
View full detailsBrake Light Switch
Cooler egr Evoque & Freelander 2 TD4 2.2
O-Ring and Grease Kit for servicing the transfer box input shaft. Contains the input shaft O-ring and the anti-seize grease used when resealing th...
View full detailsGenerations Overview
The Evoque has two distinct generations. They share the Range Rover badge and the compact-SUV positioning, but they do not share platforms, do not share most major mechanical parts, and were built with different engine families.
| Generation | Chassis code | Production | Platform | Engine families |
|---|---|---|---|---|
| First generation | L538 | 2011 to 2018 | D8 (PTA precursor) | Ford-derived (early), Ingenium (2015 to 2016 model year refresh onwards) |
| Second generation | L551 | 2019 to present | PTA (Premium Transverse Architecture) | Ingenium MHEV and PHEV |
The two platforms are not interchangeable. An L538 suspension component is not an L551 suspension component, and a control arm sold for one will not fit the other. The same applies across braking, drivetrain, and most body-related parts. Always identify the generation before ordering.
The Range Rover Evoque L538 parts collection holds the catalogue for the first generation, including all 3-door, 5-door, and Convertible variants. The Range Rover Evoque L551 parts collection holds the catalogue for the second generation, including MHEV and PHEV variants.
Vehicle IdentificationThree identification questions cover most ordering errors at the parent-page stage. Resolve all three before adding parts to the cart.
If your Evoque was first registered between November 2011 and the end of 2018, it is an L538. If first registered in 2019 or later, it is an L551. The L538 carried over into early 2019 in some markets as remaining stock cleared, so registrations from January to March 2019 should be VIN-checked rather than year-checked.
The L538 came in 5-door, 3-door (also called Coupe), and Convertible variants. The Convertible was built only for the 2016 to 2018 model years (a two-year production run), and many of its body, weather-seal, and roof-mechanism parts are unique to that variant. The L551 came as 5-door only.
The L538 split mid-production. Cars built up to the 2014 model year carry Ford-derived engines; cars from the 2015 to 2016 model year refresh onwards carry JLR's Ingenium family. Oil specifications and service intervals differ between the two eras. The L551 is Ingenium-only across the full production run, with MHEV (mild hybrid) and PHEV (plug-in hybrid) variants from launch.
Both generations carry the 17-digit ISO 3779 VIN. The 10th digit identifies model year. Cross-check against the official Range Rover Evoque vehicle page on landrover.com if you need to confirm specification against current Land Rover documentation.
System-adjacency links into the component collections that the Evoque family draws from. Use these when you know the system you need but want to browse the broader category before filtering to your generation. Each component collection covers the full Land Rover and Range Rover range, so identify your Evoque generation first, then use the filter on the component collection to narrow to L538 or L551 fitment.
Control arms, bushings, and shock absorbers across both Evoque generations. Filter to L538 or L551 above the grid.
Land Rover suspension partsTiming components, sensors, and service items for the Ford-era and Ingenium-era Evoque powertrains. Filter to L538 or L551 above the grid.
Land Rover engine partsDiscs, pads, and EPB components across the Evoque range. Filter to L538 or L551 above the grid.
Land Rover brake partsRadiators, expansion tanks, water pumps, and hose assemblies. Filter to L538 or L551 above the grid.
Land Rover cooling partsSensors, modules, batteries, and lighting circuits. Filter to L538 or L551 above the grid.
Land Rover electrical partsThe Evoque parent sits underneath the wider Range Rover parts catalogue, which also covers Range Rover Classic, P38, L322, L405, L460, Sport, and Velar generations.
Technical GuidesIn-depth Evoque technical content covering generation specifics, variant identification, and service patterns.
The L538 split into two mechanically distinct eras at the 2015 to 2016 model year refresh, and the boundary affects engine, oil, and service-interval decisions for any L538 service job.
Read the full L538 technical guideThe L538 Convertible (2016 to 2018) shares its drivetrain with the hard-top L538 but carries unique structural reinforcement, an electric roof mechanism, and weather-seal architecture that the standard L538 does not.
Read the full Convertible variant guideThe Evoque Victoria Beckham Edition (L538 Si4) and the wider Si4 petrol range share the Aisin AWF21 transmission and second-generation Haldex AWD coupling, both of which have specific service patterns worth understanding before ordering parts.
Read the full Si4 service guideThe L538 (2011 to 2018) is the first-generation Evoque, built on the D8 platform with a body style range covering 5-door, 3-door, and Convertible variants. The L551 (2019 to present) is the second-generation Evoque, built on the PTA platform shared with Discovery Sport L550, and is 5-door only. The two generations do not share the platform, do not share engine families across the full production run, and most major mechanical and body parts are not interchangeable. Order parts for the correct generation: an L538 control arm will not fit an L551, and the reverse is also true.
No. The L538 and L551 are built on different platforms (D8 versus PTA), with different suspension geometry, different mounting points, and different fastener specifications across most assemblies. Engine families overlap only in the Ingenium 2.0 litre block at the broadest level, and even there the ancillary fitments (turbo specification, sensor positions, harness routing) differ between L538 Ingenium and L551 Ingenium installations. Treat the two generations as separate vehicles for parts purposes.
Yes. The L538 Convertible was produced for two model years (2016 to 2018) and shares its drivetrain with the hard-top L538, so most service and drivetrain parts are common with the standard L538 catalogue. Convertible-specific parts cover the electric roof mechanism, structural reinforcement, and weather seals. The 600 mm wading depth and Terrain Response system match the hard-top, so off-road service items also cross over. Convertible parts are stocked in our Range Rover Evoque L538 parts collection alongside the hard-top range.
Three checks settle it. First, the registration year: L538 covers November 2011 to end of 2018, L551 covers 2019 onwards (with a brief overlap in early 2019 as remaining L538 stock cleared). Second, the body style: 3-door and Convertible variants are L538-only. Third, the VIN: both generations carry the 17-digit ISO 3779 VIN, and the 10th digit identifies model year. For any car registered in early 2019, VIN-check rather than year-check.
Yes. Budget Parts operates a wholesale account system for independent workshops and trade buyers across European markets, with account-based ordering and direct technical support. Use the trade registration on the page below the product grid to apply, or contact us if you need account assistance.
Updated: 16 May 2026