Range Rover Evoque Parts

Air Filter Element for the engine air intake system, seated within the air cleaner housing. The element traps dust and airborne particles from the...

Front lower suspension arm (wishbone), right-hand side, from the front strut suspension assembly. The arm locates the base of the wheel knuckle ag...

Front Lower Suspension Arm is the left-hand lower control arm (wishbone) of the front suspension. It locates the front wheel hub carrier to the su...

Front Lower Suspension Arm, left-hand side, supplied as a complete arm with its mounting bushes and integral lower ball joint. The arm links the f...

Starter Motor - complete assembly for the engine cranking circuit. On start-up the motor's pinion engages the flywheel/flexplate ring gear to turn ...

NOx Trap Temperature Sensor from the exhaust aftertreatment system of the 2.0L I4 AJ200 Ingenium diesel engine. The sensor reports exhaust gas tem...

Water Charge Cooler - heat exchanger of the indirect charge air cooling circuit on the 2.0L Ingenium four-cylinder engine (AJ200 petrol and diesel)...

Clutch Kit - 2.0L - With Slave Cylinder

Front Lower Suspension Arm, left-hand side, supplied as a complete arm with its mounting bushes and integral lower ball joint. The arm links the f...

High-Pressure Fuel Injection Pump for the 2.0L GTDi turbocharged petrol engine. This engine-mounted pump raises fuel to the high pressure required ...

High-Pressure Fuel Injection Pump for the 2.0L GTDi turbocharged petrol engine. This engine-mounted pump raises fuel to the high pressure required ...

Radiator is the engine coolant radiator, mounted at the front of the vehicle within the cooling pack. It transfers heat from the circulating coola...

Oil Cooler dissipates heat from the engine oil to help maintain a stable oil operating temperature. Fitted in the lubrication circuit of the 2.0L ...

Intake Camshaft Sprocket for the 2.0L 16V TIVCT turbocharged petrol engine. Driven by the timing chain, it transmits crankshaft rotation to the int...

Front Fog Lamp - exterior lighting unit that mounts into the lower aperture of the front bumper. The fog lamp produces a wide, low-set beam that l...

Clutch Repair Kit for the 6-speed manual transmission on the 2.0L Ingenium AJ200 diesel engine. The clutch transmits drive from the engine flywhee...

Oil Cooler and Filter Assembly combines the engine oil cooler and oil filter housing for the 2.2L TD4 diesel engine (DW12). Mounted in the lubrica...

Front Axle Drive Shaft, right-hand side, transmitting drive from the front differential to the road wheel. Fitted to 2.2L diesel applications. The...

Oil Cooler and Filter Assembly combines the engine oil cooler and oil filter housing for the 2.2L TD4 diesel engine (DW12). Mounted in the lubrica...

MacPherson Strut is the front suspension damper, forming the main vertical strut that locates the front wheel and controls its vertical movement. ...

Mass Air Flow (MAF) Sensor for the engine air intake system. Installed in the intake tract downstream of the air filter, the sensor measures the m...

Fuel Pump for the 2.0L TIVCT turbocharged petrol engine - the in-tank fuel pump and sender unit. Mounted inside the fuel tank, it draws fuel and d...

Fuel Pump and Sender Unit is the in-tank fuel delivery module for the 2.2L diesel. It draws fuel from the tank to feed the engine and incorporates...

Tow Bar Bracket - Flange Ball

Connecting Rod Kit for the 2.2L DW12 DOHC turbo diesel engine, supplied as a complete set of four connecting rods. The connecting rods link the pi...

Haldex Coupling Pump is the feed pump for the rear-axle Haldex coupling on all-wheel-drive models. Mounted to the Haldex unit at the rear axle, th...

Air Conditioning Compressor - the belt-driven pump at the heart of the air-conditioning refrigerant circuit. It draws low-pressure refrigerant gas ...

Alternator Assembly - the belt-driven charging unit that supplies the vehicle's electrical system and recharges the battery while the engine runs. ...

Fuel Injector for the 2.2L Td4 common-rail diesel fuel injection system. The injector meters and atomises high-pressure diesel into the combustion ...

A/C Evaporator for the air conditioning circuit, mounted within the heating and ventilation (HVAC) housing. The evaporator is the heat exchanger i...

Tow Bar Kit - Quick Release

Condenser is the air conditioning condenser, mounted at the front of the vehicle ahead of the cooling pack. It dissipates heat from the refrigeran...

Intake Manifold for the engine air intake system. It distributes the incoming air charge evenly to the cylinder intake ports and carries the mounti...

Coupling Pump is the electro-hydraulic pump that operates the rear axle all-wheel-drive coupling, generating the hydraulic pressure that engages th...

Coupling Pump is the electro-hydraulic pump that operates the rear axle all-wheel-drive coupling, generating the hydraulic pressure that engages th...

Inlet Manifold distributes charge air from the intake system to the cylinder head inlet ports. Fitted to the 2.2L Td4 (DW12) diesel engine, it rou...

Fuel Injector for the 2.0L I4 Ingenium (AJ200) diesel engine, part of the high-pressure common rail fuel injection system. The injector is clamped...

Fuel Injector for the 2.0L AJ200 (Ingenium) four-cylinder diesel engine. The injector delivers a metered, high-pressure spray of diesel into the c...

Flywheel for the 2.2L 16V common-rail turbo-diesel engine (DW12). It bolts to the rear flange of the crankshaft and carries the starter ring gear ...

Front MacPherson Strut is the front suspension strut / shock absorber assembly. It locates the front wheel hub, seats the coil spring, and damps ve...

MacPherson Strut - Front is a front suspension strut of the MacPherson type, combining the damper and spring seat in a single assembly. It locates...

Air Conditioning Compressor - Kit