Range Rover Evoque Parts

Crankshaft Sprocket is the timing gear mounted on the nose of the crankshaft. Fitted to the 2.0L 16-valve turbocharged petrol engine, it drives th...

Wiper Blade clears the front windscreen as part of the wash/wipe system. It is the front blade fitted to the left-hand wiper arm, sweeping the pas...

Wiper Blade for the front windscreen, part of the wash/wipe system on left-hand-drive vehicles. It clears rain and road spray from the windscreen ...

Wiper Blade for the front windscreen, fitted to the left-hand wiper arm on left-hand-drive vehicles. It forms part of the windscreen wash/wipe sys...

Wiper Blade clears the front windscreen as part of the wash/wipe system. It is the front blade fitted to the right-hand wiper arm, sweeping the dr...

Turbocharger Air Hose for the 2.0L 16-valve turbocharged petrol engine. It carries charge air within the turbocharger induction circuit, connecting...

Turbocharger Oil Return Hose carries lubricating oil from the turbocharger back to the engine, within the turbocharger oiling circuit. It returns ...

Cylinder Head Bolt clamps the cylinder head to the engine block, within the cylinder head assembly. It holds the head against the block and head g...

Hook Pin is a load space anchor pin fitted in the luggage compartment. It provides the mounting point onto which the load space retaining cord hoo...

Intake Manifold Gasket seals the joint between the intake manifold and the cylinder head, within the air intake assembly. It maintains an airtight...

Temperature Sensor monitors engine coolant temperature from its mounting in the cylinder block, within the Cylinder Block and Plugs assembly. The ...

Inlet Valve is a poppet valve in the cylinder head of the 2.0L Ingenium diesel engine (AJ200D / AJ20D4 / AJ21D4). Seated in the intake port, it op...

Upper Timing Cover Gasket seals the upper timing chain cover to the cylinder head on the 2.0L Ingenium diesel engine (AJ200D / AJ20D4). It forms t...

Camshaft Cover Gasket sealing the camshaft cover to the cylinder head. It seals the joint between the camshaft (cylinder head) cover and the cylin...

Camshaft Cover Gasket sealing the camshaft cover to the cylinder head. It seals the joint between the camshaft (cylinder head) cover and the cylin...

Exhaust Valve is a poppet valve in the cylinder head of the 2.0L Ingenium diesel engine (AJ200D / AJ20D4 / AJ21D4). Seated in the exhaust port, it...

Valve Rocker Arm for the cylinder head valvetrain. It transfers camshaft lift to the valve, actuating the valve as the camshaft rotates. Fitted to...

Valve Stem Seal seals the valve stem where it passes through the valve guide in the cylinder head of Ingenium diesel engines. Fitted over the top ...

Cylinder Head Gasket for the 2.0L I4 diesel (AJ200) engine, sealing the cylinder head to the engine block. Supplied in thickness grade 4 (1.6 mm). ...

Exhaust Manifold Gasket that seals the joint between the cylinder head and the exhaust manifold. The gasket maintains a gas-tight seal at the mani...

Shock Absorber Boot for the suspension damper assembly. The boot sheaths the exposed damper piston rod, shielding it from grit, moisture and road ...

Cylinder Head Gasket for the 2.0L I4 diesel (AJ200) engine, sealing the cylinder head to the engine block. Supplied in thickness grade 1 (1.3 mm). ...

Cylinder Head Gasket for the 2.0L I4 diesel (AJ200) engine, sealing the cylinder head to the engine block. Supplied in thickness grade 2 (1.4 mm). ...

Brake Pad Set for the front axle, part of the front disc brake assembly. The pads are clamped by the front brake calipers against the brake discs ...

Front Brake Pad Set with ceramic friction material, for the front disc brake assembly. The set fits the front calipers and provides the friction s...

Turbocharger Gasket for the exhaust turbocharger joint, sealing the turbine outlet to the exhaust front pipe. The gasket maintains a gas-tight sea...

Rear Hub Bearing for the rear hub assembly on front-wheel-drive models. The sealed bearing carries the wheel hub, allowing the wheel to rotate fre...

Turbocharger Gasket for the exhaust turbocharger joint, sealing the turbine outlet to the exhaust front pipe. The gasket maintains a gas-tight sea...

Wire - Brake Pad Wear Warning

Cylinder Head Cover Gasket for the 2.0L Petrol engine. This gasket seals the cylinder head cover to the cylinder head, containing oil within the v...

Screw - M6 x 25mm threaded fastener used across the 2.0L Ingenium petrol engine assembly. Secures components at the timing gear, fuel injector, wa...

Coolant Hose for the engine cooling circuit of the 2.0L 16V turbocharged petrol engine. It carries coolant between the cooling system components, f...

Brake Pad Set for the rear axle, fitting the rear brake calipers. Supplied as a complete set of friction pads for the rear axle. The pads act agai...

Rear Brake Pad Set for the rear disc brakes. This rear-axle disc brake pad set uses a ceramic friction compound reinforced with Kevlar fibre. The ...

Brake Caliper Guide Pin Kit for the front brake calipers. The guide pins let the caliper slide on its mounting bracket so the pads clamp evenly ag...

Nut - an M8 x 1.25 captive U-spring nut used to mount the air suspension compressor. The spring-steel body clips over the chassis bracket to provi...

Fuel Injector - high-pressure common-rail injector for the 2.0L AJ21D4 Ingenium diesel, mid power output. The injector is clamped into the cylinde...

Front Brake Hose - Left-Hand - the flexible hydraulic hose on the left-hand front corner, connecting the rigid brake pipe on the body to the front ...

Trim Clip that secures interior and exterior trim panels, door finishers and mouldings to the body. The clip locates in a pre-formed panel apertur...

Rear Brake Disc - 325 mm solid disc for the rear axle service brake assembly, supplied as an axle pair. Each disc locates on the rear wheel hub fl...

Rear Brake Disc - 300 mm solid disc for the rear axle service brake assembly, supplied as an axle pair. Each disc locates on the rear wheel hub fl...

Front brake disc, 349mm diameter, internally vented, forming part of the front brake disc and caliper assembly. Mounted to the front hub, the disc...

Brake Pad Set for the rear disc brake assembly, supplied as a complete axle set sized for applications running 17-inch wheels. The pads seat withi...