Range Rover Evoque Parts

Auxiliary Coolant Pump - an electrically driven pump in the engine cooling system that circulates coolant independently of the belt-driven main wat...

Vacuum Pump for the 2.0L 16-valve petrol (Ingenium / GTDI) engine. The pump supplies the vacuum used by the brake booster (servo) and other vacuum...

Fuel Sender Cover for the fuel tank sender unit. It fits over the sender module aperture in the fuel tank, enclosing the fuel level sender assembly...

Electronic Parking Brake Actuator for the left-hand rear brake caliper, part of the electronic parking brake (EPB) system. The actuator is a self-...

Brake Disc - Rear - brake disc for the rear axle, supplied as a pair. The disc mounts to the rear hub and provides the friction surface that the r...

Radiator is the engine coolant radiator for 2.2L diesel applications. It dissipates heat from the engine coolant as it flows through the core, mai...

Camshaft Sprocket for the timing drive of the Ingenium engine family - the 2.0L and 3.0L diesel and 3.0L petrol units. Mounted on the end of the ca...

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

Engine Mounting supports the engine on the subframe and damps vibration transmitted into the body. Fitted to the 2.0L 16V TiVCT turbocharged petro...

Tube - Outlet

Front Lower Engine Mounting is the lower insulator supporting the engine at the front of the mounting system. It locates the engine to the subfram...

Oil Cooler, part of the engine lubrication system. It draws heat out of the engine oil to hold oil temperature within its operating range under su...

Oil Cooler, part of the engine lubrication system. It draws heat out of the engine oil to hold oil temperature within its operating range under su...

Heater blower motor and fan assembly for the heating, ventilation and air conditioning unit. The motor drives the centrifugal fan wheel that draws...

Goodridge Brake Hose Kit - Standard Length

Brake Caliper is the rear brake caliper within the rear disc brake assembly. It houses the hydraulic piston and carries the brake pads; under brak...

Brake Caliper is the rear brake caliper within the rear disc brake assembly. It houses the hydraulic piston and carries the brake pads; under brak...

Brake Master Cylinder with integral fluid reservoir, for the brake hydraulic system. It converts brake-pedal force into hydraulic pressure and dis...

Front Axle Drive Shaft Bracket that carries the intermediate bearing of the front axle drive shaft where the shaft runs from the transfer case. It...

Brake Disc for the rear axle, 317 mm diameter. Supplied as a pair, covering both sides of the axle.

Front Door Latch mounted in the front door as part of the door locking and latching mechanism. It engages the striker on the body pillar to hold t...

Crankshaft Pulley with integral torsional vibration damper, mounted on the crankshaft nose of the 2.0L Ingenium AJ200 four-cylinder petrol and dies...

Water Pump is part of the engine cooling system. It circulates coolant through the cylinder block, cylinder head and radiator to carry heat away f...

Passive Start Module is part of the keyless (passive) start and vehicle anti-theft system. It authenticates the smart key fob and allows the engin...

Air Inlet Hose in the charge-air / intercooler circuit of the turbocharged intake system. It carries pressurised air along the boost path between ...

Fixed Side Steps - a pair of body-mounted running boards fitted along the lower sill line to ease access to the cabin and to shield the sill from s...

Water Outlet Adaptor for the engine cooling circuit of the 2.0L turbocharged petrol engine (TIVCT). The adaptor forms the coolant outlet on the en...

Front Axle Drive Shaft - Joint and Stub Shaft, part of the front axle drive assembly. It transmits drive from the front differential to the front ...

Rocker Cover for the 2.2L DW12 diesel engine, sealing the top of the cylinder head over the camshafts and valvetrain. Also referred to as the cams...

Crankshaft Pulley mounts on the front of the crankshaft of the 2.0L 16V Ti-VCT turbocharged petrol engine (240PS). It transfers drive from the cra...

Oil Filter Element and Seal

Starter Motor - starting motor for the 2.2L CR DI 16V turbo diesel (DW12 / TD4), part of the engine starting system. When energised by the starter...

Camshaft Sprocket is a timing-drive gear in the valve train of the 2.0L Ingenium diesel engine (AJ200D). Mounted on the end of the camshaft, it is...

Fixed Side Steps - a pair of body-side access steps that mount to the lower body at the sill on dedicated mounting brackets. The steps give a fixe...

Powered Tailgate Strut from the electrically operated tailgate lift mechanism - left-hand side, upper mounting. Unlike a plain gas stay, this stru...

Oxygen Sensor - exhaust and emission control system, 2.0L engine. The sensor threads into the exhaust front pipe at the catalytic converter, in th...

Rocker Cover for the 2.2L DW12 diesel engine, sealing the top of the cylinder head over the camshafts and valvetrain. Also referred to as the cams...

Tensioner Pulley for the auxiliary (accessory) belt drive on 2.0L AJ200 / AJ20 Ingenium petrol and diesel applications. The spring-loaded tensione...

D3S xenon headlamp bulb, supplied with its igniter, for headlamp units originally built as bi-xenon or adaptive xenon assemblies. D3S is a mercury...

Tow Bar Electrics

Front Lower Suspension Arm is the left-hand lower control arm (wishbone) of the front suspension. It locates the front wheel hub carrier to the su...