Range Rover Evoque Parts

Knock Sensor mounts on the cylinder block and detects engine knock through block vibration. It reports combustion knock to the engine management s...

Oil Cooler Gasket seals the oil cooler within the oil cooler and filter housing assembly. It maintains the oil-tight joint between the cooler and ...

Cylinder Head Bolt securing the cylinder head to the cylinder block on the 2.0L 16V Ti-VCT turbocharged petrol engine. The bolt clamps the head, h...

Exhaust Gas Pressure Sensor mounted in the front pipe / catalyst section of the exhaust system. The sensor measures exhaust gas pressure and repor...

Injector Refit Kit supplying the seals needed to refit a fuel injector on petrol engines. It restores the sealing interface between the injector an...

Bolt used in the front brake disc and caliper assembly. This is a securing fastener within the front braking installation.

Front Brake Pad Wear Sensor monitors friction-material thickness at the front axle. As the brake pads approach their wear limit, the sensor circuit...

Fuel Injector Sealing Washer for the fuel injection system. Seals the fuel injector against the cylinder head, maintaining the combustion seal and...

Emission Gasket for the crankcase cover, part of the crankcase ventilation and emission-control system on the 2.0L AJ200/AJ20D4 four-cylinder diese...

Timing Chain Tensioner Arm bears against the timing chain within the timing drive assembly, providing the face through which the tensioner applies ...

O-Ring sealing the variable valve timing (VVT) solenoid cover. Seals the VVT solenoid cover within the engine timing gear, preventing oil leakage ...

Sealing Ring - 34.2 x 3.0mm O-ring that seals a joint in the thermostat housing and EGR cooling circuit. Fitted to the 2.0L four-cylinder AJ200/AJ...

Connecting Rod Bolt secures the connecting rod big-end cap to the connecting rod within the crankshaft, pistons and bearings assembly. The bolt cl...

Lithium-Ion Battery - the backup battery for the Telematics Control Unit (TCU). It supplies backup power to the telematics control unit so the uni...

Guide - Timing Chain

Mudflaps - Front

Wind Deflectors - Front - Evoque 3DR

Wind Deflectors - Set of 4 - 5DR Evoque

Performance Air Filter - Evoque

Hex Nut is an M6 flange nut with a 10mm hexagonal drive. It retains wheel arch liner and splashguard panels on their mounting studs. The integral ...

Hex Nut is an M6 flange nut with a 10mm hexagonal drive. It retains wheel arch liner and splashguard panels on their mounting studs. The integral ...

Nut and Washer Assembly is an M6 hexagonal nut supplied together with its washer as a single assembly. The washer spreads the clamping load across...

Accessory Drive Belt for the engine accessory (ancillary) drive on 2.0L GTDi and second-generation 2.0L turbocharged petrol engines. The belt is d...

Accessory Drive Belt for the engine accessory (ancillary) drive on 2.0L GTDi and second-generation 2.0L turbocharged petrol engines. The belt is d...

Accessory Drive Belt for the engine accessory (ancillary) drive on 2.0L GTDi and second-generation 2.0L turbocharged petrol engines. The belt is d...

Suspension arm bush for the rear position of the front lower suspension arm (wishbone), in the front strut suspension assembly. The bush presses i...

Ball Joint

Ball Joint Fitting Kit

Suspension arm bush for the front lower suspension arm (wishbone) in the front strut suspension assembly. The bush presses into the inboard eye of...

Timing Chain Guide - LH Primary - a fixed guide in the timing drive assembly of the 2.0L four-cylinder Ingenium petrol engine (AJ200 / AJ20P4), inc...

Timing Chain Guide - LH Primary - a fixed guide in the timing drive assembly of the 2.0L four-cylinder Ingenium petrol engine (AJ200 / AJ20P4), inc...

Drive Shaft Boot Kit - Outer Constant Velocity Joint - Front, part of the front axle drive shaft assembly. The boot seals the outer constant veloc...

Exhaust Manifold Fixing Spacer - a fixing component within the exhaust manifold mounting arrangement of the 2.2L CR DI 16V four-cylinder diesel eng...

Drive Chain Idler - timing gear idler sprocket for the 2.0L four-cylinder Ingenium engine family (AJ200 / AJ20 series, petrol and diesel). The idl...

Arm - Timing Chain Tensioner

O-Ring for the high-pressure diesel fuel injection pump. The ring seals the joint between the pump body and its mounting face on the engine, preve...

Iridium Spark Plug for the 2.0L 16V TIVCT turbocharged petrol engine (Si4, 240PS). The plug threads into the cylinder head and fires beneath its c...

PCV Valve Service Kit for the crankcase ventilation circuit of the 2.0L Ingenium petrol engine (AJ200 / AJ20P4). The positive crankcase ventilatio...

Limited Slip Rear Axle Oil, supplied in a 1 litre container. A hypoid gear oil for rear drive units fitted with a limited-slip differential. The a...

Front Brake Hose - the flexible section of the front brake circuit, running between the rigid brake pipe on the body and the front brake caliper. U...

Rear Crankshaft Oil Seal and Retainer forms the oil-tight closure at the flywheel end of the cylinder block, within the Cylinder Block and Cranksha...

Front Brake Pad Wear Sensor Wire from the front brake pad wear warning circuit. The sensor wire is routed into a slot in the front brake pad frict...