Range Rover Evoque Parts

Brake Fluid - DOT 4 low-viscosity hydraulic brake fluid, supplied in a 1 litre container. It transmits pedal pressure through the hydraulic brakin...

High Pressure Fuel Pump Tappet drives the engine-mounted high-pressure fuel pump from the camshaft. The tappet acts as the cam follower, riding on...

High Pressure Fuel Pump Tappet drives the engine-mounted high-pressure fuel pump from the camshaft. The tappet acts as the cam follower, riding on...

Fuel Pump Support Housing Seal seals the mounting interface of the high-pressure fuel pump support housing on 2.0L Si4 petrol engines. The high-pr...

Fuel Pump O-Ring Seal, 31mm x 2mm - the sealing ring at the fuel pump / fuel injection pump joint. This O-ring is the only seal at that joint, so ...

Oil Separator is the crankcase ventilation (PCV) oil separator for the 2.0L 16V turbocharged petrol engine. It sits in the crankcase breather circ...

Fuel Pump O-Ring Seal, 31mm x 2mm - the sealing ring at the fuel pump / fuel injection pump joint. This O-ring is the only seal at that joint, so ...

Variable Valve Timing Solenoid - Inlet for the 2.0L 16V TiVCT turbocharged petrol engine, controlling oil flow to the intake camshaft phaser. The ...

Thermostat Housing Gasket for the 2.0L 16V TIVCT turbocharged petrol (GTDi) engine. It seals the thermostat housing against the engine within the c...

Plastic Rivet is a push-fit fastener that secures front engine-compartment insulation panels to the body. It locates into a pre-formed panel hole t...

Turbocharger Mounting Nut is a fastener used in the turbocharger mounting assembly, clamping the turbocharger against its gasketed joint at the fla...

Oil Filler Cap seals the engine oil filler opening on the camshaft cover of the 2.0L 16V turbocharged petrol engine. It closes the point where eng...

Turbocharger Oil Feed Filter is a small in-line filter located in the turbocharger oil feed pipe. It traps particulate debris carried in the pressu...

Turbocharger Oil Feed Filter is a small in-line filter located in the turbocharger oil feed pipe. It traps particulate debris carried in the pressu...

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

Manifold to Cylinder Head Stud secures the exhaust manifold and turbocharger assembly to the cylinder head. Threaded mounting stud used in the exh...

Inlet Valve for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It seats in the cylinder head as part of the valve train. The ...

Inlet Valve for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It seats in the cylinder head as part of the valve train. The ...

Camshaft Spacer for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It locates in the camshaft sprocket and timing gear area. ...

Oil Pump Drive Sprocket for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It drives the engine oil pump through the oil pump ...

Cylinder Head Gasket seals the cylinder head to the engine block on the 2.0L Ingenium four-cylinder diesel engine (AJ200 series). It seals the com...

Cylinder Head Gasket seals the cylinder head to the engine block on the 2.0L Ingenium four-cylinder diesel engine (AJ200 series). It seals the com...

Valve Stem Seal Set for the 2.0L 16V petrol engine, supplied as a set of eight seals. Valve stem seals fit at the top of the valve guides in the c...

Engine Coolant Temperature Sensor for the 2.0L 16V petrol engine. It threads into the thermostat housing and measures coolant temperature, signalli...

Engine Coolant Temperature Sensor for the 2.0L 16V petrol engine. It threads into the thermostat housing and measures coolant temperature, signalli...

Crankshaft Damper Washer for the 2.0L 16-valve turbocharged petrol engine, fitted in the crankshaft damper assembly at the front of the timing gear...

Crankshaft Damper Washer for the 2.0L 16-valve turbocharged petrol engine, fitted in the crankshaft damper assembly at the front of the timing gear...

Oil Filter Adaptor Gasket for the 2.0L 16-valve turbocharged petrol engine, sealing the oil cooler and filter adaptor to the engine. The gasket fo...

Throttle Body Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the throttle body and the inlet manifold. It mai...

Inlet Manifold Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the inlet manifold and the cylinder head. It ma...

Engine Mounting Bolt with hexagonal head, M12 x 112 mm. A structural fastener securing the engine mounting to the subframe; the same bolt is also ...

Automatic Transmission Fluid (ATF), supplied in a 1 litre container. Specified for the automatic transmission and, where applicable, the power ste...

Automatic Transmission Fluid (ATF), supplied in a 1 litre container. Specified for the automatic transmission and, where applicable, the power ste...

Cylinder Head Bolt Kit for the 2.0L Ingenium diesel engine (AJ200 / AJ20D4). Supplied as a set for renewing the cylinder head bolts when the cylin...

Cylinder Head Bolt for the 2.0L Ingenium diesel engine (AJ200 / AJ20D4), securing the cylinder head to the engine block. Supplied as a single bolt...

Fuel Pressure Regulator (fuel pressure control valve) for the diesel high-pressure fuel injection system. Mounted on the high-pressure fuel pump, i...

Cylinder Head Gasket for the 2.0L I4 (AJ200 / AJ20D4) diesel engine. It seals the joint between the cylinder head and the engine block, sealing com...