Range Rover Evoque Parts

EGR Vacuum Control Valve for the exhaust gas recirculation system on 2.2L diesel engines. The valve sits in the vacuum circuit between the vacuum ...

Cylinder Head Gasket sealing the cylinder head to the engine block. Fitted to the 2.0L four-cylinder AJ200 (Ingenium) petrol engine, including PHE...

Gasket round shape type, cover

Temperature Sensor

Oil Level Sensor for the 2.0L 16V TiVCT turbocharged petrol engine, fitted to the oil pan (sump). The sensor measures engine oil level and reports...

Fuel Pressure Sensor for the high-pressure fuel injection circuit on petrol engines. It measures fuel rail pressure and temperature and reports to ...

Engine Mounting is the insulator that supports the engine on its mounting and isolates vibration from the body. It locates the engine to the subfr...

Oil Filter Adaptor for the 2.0L 16V TiVCT turbocharged Si4 petrol engine, part of the engine lubrication system. The adaptor mounts the oil filter...

Primary Timing Chain Tensioner from the timing drive assembly at the front of the 2.0L four-cylinder AJ200 / AJ20P4 engine. The tensioner bears ag...

Timing Chain - Secondary, Upper is part of the camshaft drive of the 2.0L Ingenium four-cylinder petrol engine (AJ200 / AJ20P4), including plug-in ...

Gasket - Cylinder. Head Front Cover

Engine Knock Sensor for the 2.0L 16-valve turbocharged petrol engine, mounted on the cylinder block as part of the engine management system. The s...

Timing Chain - Secondary, Upper is part of the camshaft drive of the 2.0L Ingenium four-cylinder turbo diesel (AJ200D / AJ20D4). It runs in the up...

Gasket Kit

Engine Mount Insulator is the rear lower engine mounting within the engine support system. It locates the engine to the subframe and isolates engi...

Gasket - Cylinder. Head Front Cover

Engine Mounting is the insulator that supports the engine on its mounting and isolates vibration from the body. It locates the engine to the subfr...

Transmission Drain Plug for the automatic transmission. Seals the fluid drain point on the AWF21 6-speed automatic transmission. Removed to drain ...

Water Pump circulates coolant through the engine cooling system. Driven from the engine, it pumps coolant through the block, cylinder head and rad...

Fuel Pressure and Temperature Sensor for petrol fuel-injection systems. The combined sensor measures fuel rail pressure and fuel temperature and r...

Timing Chain for the timing drive of the 2.0L Ingenium four-cylinder diesel engine (AJ200D / AJ20D4). This is the lower, primary chain of the two-...

Oil Filler Cap for the 2.2L diesel engine. It seals the oil filler aperture, closing the crankcase to prevent oil loss and contamination during en...

Turbocharger Oil Feed Pipe for the turbocharger lubrication circuit. Carries pressurised engine oil from the oil supply to the turbocharger bearin...

Water Pump circulates coolant through the engine cooling system. Driven from the engine, it pumps coolant through the block, cylinder head and rad...

Valve Stem Seal - valve train sealing component in the cylinder head of the 2.2L Td4 diesel engine. The seal fits over the valve stem at the top o...

Clutch Master Cylinder Seal - the O-ring that seals the clutch master cylinder within the clutch hydraulic circuit. It maintains the hydraulic sea...

Glow Plug Wire for the 2.2L diesel engine. Carries the electrical supply to the glow plugs as part of the cold-start pre-heating circuit. Applicab...

Oil Separator is the crankcase ventilation (PCV) oil separator for the 2.0L 16V turbocharged petrol engine. It sits in the crankcase breather circ...

Oil Filter - engine oil filter element for the 2.2L Td4 diesel engine, supplied with its sealing ring. The element fits inside the filter housing ...

Crankshaft Position Sensor (CPS) mounts to the cylinder block and reads the crankshaft trigger wheel to give the engine ECU crankshaft speed and an...

Turbocharger Oil Feed Pipe for the turbocharger lubrication circuit. Carries pressurised engine oil from the oil supply to the turbocharger bearin...

Thermostat Housing for the 2.0L Ingenium petrol engine (AJ200P, including PHEV applications). The housing holds the coolant thermostat and forms p...

Oil Cooler Return Connector is a connector fitting in the engine oil cooler circuit of the 2.2L diesel engine (DW12). It joins the oil cooler retu...

Crankshaft Position Sensor - engine management sensor for the 2.0L 16V turbocharged petrol engine. The sensor reads the toothed reluctor ring on t...

Drain Plug Washer - a sealing washer for the differential drain and filler plugs on the front and rear axles. It seals the plug against the axle c...

Oil Filter Housing Cover for the oil cooler and filter housing on the 2.2L DW12 turbo-diesel engine. The cover closes the oil filter housing, reta...

Ignition Coil for the engine ignition system. It steps up battery voltage to the high voltage needed to fire the spark plug and is mounted directly...

VVT Solenoid is the exhaust-camshaft variable valve timing control solenoid for the 2.0L 16V turbocharged petrol engine. Acting on signals from th...

Cylinder Block Plug, 16mm, seals a threaded port in the cylinder block. It closes an internal casting passage in the block, retaining pressure and...

Lower Engine Mount (engine support insulator) securing the engine at its lower mounting point. It carries the lower engine load and damps engine v...

Timing Chain - Lower is the lower (primary) chain of the timing drive on the 2.0L Ingenium four-cylinder petrol engine (AJ200 / AJ20P4, including t...