for Discounts / VAT
for Discounts & Correct VAT
Range Rover Evoque parts for both production generations: the L538 (2011 to 2018) and the L551 (2019 to present), including the L538 Convertible (2016 to 2018). The compact Range Rover sits on a different mechanical lineage from its full-size siblings, with its own platform codes, engine families, and service patterns.
Both generations are dispatched from our Dutch warehouse network for EU delivery. Use the generation links below to enter the correct child collection, or read on for the L538-versus-L551 boundary and a VIN-check overview.
Crankshaft Position Sensor - engine management sensor for the 2.0L 16V turbocharged petrol engine. The sensor reads the toothed reluctor ring on t...
View full detailsOutput Shaft Oil Seal seals the transmission output shaft where it exits the case on the ZF 9HP48 / 9HP50 nine-speed automatic gearbox (all-wheel-d...
View full detailsShock Absorber for the front suspension. The damper forms part of the front strut assembly, controlling spring oscillation and wheel movement to k...
View full detailsGrommet - a moulded rubber grommet fitted into an aperture in the body. It lines and seals the opening, providing a finished edge and helping to k...
View full detailsBolt and Washer Assembly - hex-head bolt with captive washer, used in the front suspension and cross member mountings. It secures the front cross ...
View full detailsService Kit - a single-part-number set of the filters and consumables required for a scheduled service on the 2.0L AJ200 single-turbo diesel engine...
View full detailsDrain Plug Washer - a sealing washer for the differential drain and filler plugs on the front and rear axles. It seals the plug against the axle c...
View full detailsRadiator Cap - screw-on pressure cap for the coolant expansion tank in the engine cooling system. The cap seals the expansion tank and holds the c...
View full detailsOil Filter Housing Cover for the oil cooler and filter housing on the 2.2L DW12 turbo-diesel engine. The cover closes the oil filter housing, reta...
View full detailsFront Window Regulator for the front door. The regulator is the mechanism that raises and lowers the door glass, guiding it on its lifter rails as ...
View full detailsFront Door Window Regulator for the left-hand door. The window regulator carries the door glass and raises or lowers it as the window lift motor o...
View full detailsIgnition Coil for the engine ignition system. It steps up battery voltage to the high voltage needed to fire the spark plug and is mounted directly...
View full detailsExhaust Gas Temperature (EGT) Sensor for the exhaust after-treatment system on the 2.0L I4 diesel. Fitted in the upper position on the front pipe ...
View full detailsCoolant Expansion Tank is the reservoir within the engine cooling system. It accommodates coolant expansion as temperature rises, provides a fill ...
View full detailsFuel Feed Tube is a rigid fuel line in the fuel delivery system, routing pressurised fuel toward the engine's fuel rail. Applies to the 2.0L 16V T...
View full detailsVVT Solenoid is the exhaust-camshaft variable valve timing control solenoid for the 2.0L 16V turbocharged petrol engine. Acting on signals from th...
View full detailsAshtray in Ebony Black for the centre floor console. The ashtray is a removable insert that locates in the console cubby box.
Rear Brake Pad Set - friction pads for the rear disc brake assembly, supplied as a rear axle set complete with springs. The pads locate in the rea...
View full detailsInjector Refit Kit for the fuel injection system on the 2.0L 16V TIVCT turbo petrol engine. It supplies the seals and service components required ...
View full detailsCylinder Block Plug, 16mm, seals a threaded port in the cylinder block. It closes an internal casting passage in the block, retaining pressure and...
View full detailsCylinder Block Plug, 16mm, seals a threaded port in the cylinder block. It closes an internal casting passage in the block, retaining pressure and...
View full detailsTransmission Oil Pipe Kit - the external oil pipework for the 9-speed automatic transmission (9HP48). The pipes route transmission fluid between t...
View full detailsLower Engine Mount (engine support insulator) securing the engine at its lower mounting point. It carries the lower engine load and damps engine v...
View full detailsEngine Start/Stop Switch - the push-button ignition switch of the keyless start system. Pressing the button powers up and starts or stops the engi...
View full detailsFront Tow Hook Cover is the trim cap that fills the towing-eye aperture in the front bumper. It clips into the bumper opening to conceal the threa...
View full detailsTailgate Latch - the latch mechanism for the powered upper tailgate. It secures the tailgate closed and, on the power-operated tailgate, works wit...
View full detailsSeal - Door Front and Rear
Exhaust Gas Temperature (EGT) Sensor for the exhaust after-treatment system on the 2.0L I4 diesel. Fitted in the rear position on the front pipe a...
View full detailsSuspension Arm - Front - RH is the right-hand front lower suspension arm, locating the front hub carrier to the subframe and setting front wheel ge...
View full detailsTiming Chain - Lower is the lower (primary) chain of the timing drive on the 2.0L Ingenium four-cylinder petrol engine (AJ200 / AJ20P4, including t...
View full detailsSump Drain Plug for the 2.2L DW12 Td4 diesel engine oil pan. Threaded into the base of the sump, it is removed to drain the engine oil during a se...
View full detailsTiming Belt for the 2.2L DW12 Td4 diesel engine - the toothed belt that drives the camshafts from the crankshaft, keeping valve and piston movement...
View full detailsValve Tappet for the 2.2L DW12 Td4 diesel engine, part of the cylinder head valve train. It provides the pivot for the rocker arm and takes up cle...
View full detailsFront Brake Disc - cross-drilled and grooved - for the front axle braking assembly. The drilled holes and machined grooves across the friction face...
View full detailsRocker Arm for the 2.2L DW12 Td4 diesel engine, part of the cylinder head valve train. It transfers camshaft lobe motion to the valve, opening it ...
View full detailsRocker Arm for the 2.2L DW12 Td4 diesel engine, part of the cylinder head valve train. It transfers camshaft lobe motion to the valve, opening it ...
View full detailsCigar Lighter Base Assembly - the socket housing for the cigar lighter and 12V auxiliary power point. It mounts in the instrument panel or floor co...
View full detailsCigar Lighter Base - the socket housing for the cigar lighter and 12V auxiliary power point. It mounts in the instrument panel or floor console and...
View full detailsBrake Caliper Guide Pin Kit for a floating (sliding) brake caliper. The guide pins locate the caliper body on its carrier bracket and let it slide ...
View full detailsBrake Pad - Rear is an EBC Yellowstuff rear axle disc brake pad set. The Yellowstuff friction compound is formulated for high friction across a wi...
View full detailsFuel Pump Drive Sprocket is a timing-drive gear in the timing gear train of the 2.0L Ingenium diesel engine (AJ200D / AJ20D4). Driven by the timin...
View full detailsBrake Pad - Rear is a set of disc brake friction pads for the rear axle. The pads are clamped against the brake disc by the caliper to generate br...
View full detailsBrake Pad - Rear is a set of disc brake friction pads for the rear axle. The pads are clamped against the brake disc by the caliper to generate br...
View full detailsBrake Pad - Front
Brake Pad Front Green Stuff
Brake Pad - Rear is a set of disc brake friction pads for the rear axle. The pads are clamped against the brake disc by the caliper to generate br...
View full detailsStarter Inhibitor Switch mounted at the clutch pedal on manual-transmission models. It detects when the clutch pedal is fully depressed and prevent...
View full detailsFuel Tank Vent Reservoir for the evaporative emission control (EVAP) system on petrol models. It collects and stores fuel vapour drawn from the fue...
View full detailsGenerations Overview
The Evoque has two distinct generations. They share the Range Rover badge and the compact-SUV positioning, but they do not share platforms, do not share most major mechanical parts, and were built with different engine families.
| Generation | Chassis code | Production | Platform | Engine families |
|---|---|---|---|---|
| First generation | L538 | 2011 to 2018 | D8 (PTA precursor) | Ford-derived (early), Ingenium (2015 to 2016 model year refresh onwards) |
| Second generation | L551 | 2019 to present | PTA (Premium Transverse Architecture) | Ingenium MHEV and PHEV |
The two platforms are not interchangeable. An L538 suspension component is not an L551 suspension component, and a control arm sold for one will not fit the other. The same applies across braking, drivetrain, and most body-related parts. Always identify the generation before ordering.
The Range Rover Evoque L538 parts collection holds the catalogue for the first generation, including all 3-door, 5-door, and Convertible variants. The Range Rover Evoque L551 parts collection holds the catalogue for the second generation, including MHEV and PHEV variants.
Vehicle IdentificationThree identification questions cover most ordering errors at the parent-page stage. Resolve all three before adding parts to the cart.
If your Evoque was first registered between November 2011 and the end of 2018, it is an L538. If first registered in 2019 or later, it is an L551. The L538 carried over into early 2019 in some markets as remaining stock cleared, so registrations from January to March 2019 should be VIN-checked rather than year-checked.
The L538 came in 5-door, 3-door (also called Coupe), and Convertible variants. The Convertible was built only for the 2016 to 2018 model years (a two-year production run), and many of its body, weather-seal, and roof-mechanism parts are unique to that variant. The L551 came as 5-door only.
The L538 split mid-production. Cars built up to the 2014 model year carry Ford-derived engines; cars from the 2015 to 2016 model year refresh onwards carry JLR's Ingenium family. Oil specifications and service intervals differ between the two eras. The L551 is Ingenium-only across the full production run, with MHEV (mild hybrid) and PHEV (plug-in hybrid) variants from launch.
Both generations carry the 17-digit ISO 3779 VIN. The 10th digit identifies model year. Cross-check against the official Range Rover Evoque vehicle page on landrover.com if you need to confirm specification against current Land Rover documentation.
System-adjacency links into the component collections that the Evoque family draws from. Use these when you know the system you need but want to browse the broader category before filtering to your generation. Each component collection covers the full Land Rover and Range Rover range, so identify your Evoque generation first, then use the filter on the component collection to narrow to L538 or L551 fitment.
Control arms, bushings, and shock absorbers across both Evoque generations. Filter to L538 or L551 above the grid.
Land Rover suspension partsTiming components, sensors, and service items for the Ford-era and Ingenium-era Evoque powertrains. Filter to L538 or L551 above the grid.
Land Rover engine partsDiscs, pads, and EPB components across the Evoque range. Filter to L538 or L551 above the grid.
Land Rover brake partsRadiators, expansion tanks, water pumps, and hose assemblies. Filter to L538 or L551 above the grid.
Land Rover cooling partsSensors, modules, batteries, and lighting circuits. Filter to L538 or L551 above the grid.
Land Rover electrical partsThe Evoque parent sits underneath the wider Range Rover parts catalogue, which also covers Range Rover Classic, P38, L322, L405, L460, Sport, and Velar generations.
Technical GuidesIn-depth Evoque technical content covering generation specifics, variant identification, and service patterns.
The L538 split into two mechanically distinct eras at the 2015 to 2016 model year refresh, and the boundary affects engine, oil, and service-interval decisions for any L538 service job.
Read the full L538 technical guideThe L538 Convertible (2016 to 2018) shares its drivetrain with the hard-top L538 but carries unique structural reinforcement, an electric roof mechanism, and weather-seal architecture that the standard L538 does not.
Read the full Convertible variant guideThe Evoque Victoria Beckham Edition (L538 Si4) and the wider Si4 petrol range share the Aisin AWF21 transmission and second-generation Haldex AWD coupling, both of which have specific service patterns worth understanding before ordering parts.
Read the full Si4 service guideThe L538 (2011 to 2018) is the first-generation Evoque, built on the D8 platform with a body style range covering 5-door, 3-door, and Convertible variants. The L551 (2019 to present) is the second-generation Evoque, built on the PTA platform shared with Discovery Sport L550, and is 5-door only. The two generations do not share the platform, do not share engine families across the full production run, and most major mechanical and body parts are not interchangeable. Order parts for the correct generation: an L538 control arm will not fit an L551, and the reverse is also true.
No. The L538 and L551 are built on different platforms (D8 versus PTA), with different suspension geometry, different mounting points, and different fastener specifications across most assemblies. Engine families overlap only in the Ingenium 2.0 litre block at the broadest level, and even there the ancillary fitments (turbo specification, sensor positions, harness routing) differ between L538 Ingenium and L551 Ingenium installations. Treat the two generations as separate vehicles for parts purposes.
Yes. The L538 Convertible was produced for two model years (2016 to 2018) and shares its drivetrain with the hard-top L538, so most service and drivetrain parts are common with the standard L538 catalogue. Convertible-specific parts cover the electric roof mechanism, structural reinforcement, and weather seals. The 600 mm wading depth and Terrain Response system match the hard-top, so off-road service items also cross over. Convertible parts are stocked in our Range Rover Evoque L538 parts collection alongside the hard-top range.
Three checks settle it. First, the registration year: L538 covers November 2011 to end of 2018, L551 covers 2019 onwards (with a brief overlap in early 2019 as remaining L538 stock cleared). Second, the body style: 3-door and Convertible variants are L538-only. Third, the VIN: both generations carry the 17-digit ISO 3779 VIN, and the 10th digit identifies model year. For any car registered in early 2019, VIN-check rather than year-check.
Yes. Budget Parts operates a wholesale account system for independent workshops and trade buyers across European markets, with account-based ordering and direct technical support. Use the trade registration on the page below the product grid to apply, or contact us if you need account assistance.
Updated: 16 May 2026