Range Rover Sport L320 Parts

Turbo Stud is a fastener in the turbocharger mounting hardware. This double-ended stud carries an M8 thread at each end (10 mm and 25 mm thread le...

Cylinder Head Bolt - M10 x 175mm bolt clamping the cylinder head to the block on the AJ-series V8 petrol engine. A torque-to-yield fastener; twent...

Fuel Pump & Sender Module - the complete in-tank fuel delivery unit for TDV6 and TDV8 diesel engines. Mounted inside the fuel tank, the module...

Rear Brake Caliper - Left-Hand is part of the rear braking assembly, mounting over the rear brake disc on the left-hand side of the vehicle. The c...

Water Pump for the engine cooling circuit on the 3.0L V6 diesel engine. This pump circulates coolant through the engine block, cylinder heads, and...

Anti Roll Bar Link

Exhaust Mounting - Rubber is a rubber isolator in the exhaust suspension system, fitted between the exhaust assembly and the vehicle underbody. Th...

Lockable Tow Ball Handle Assembly for the detachable tow ball system. It locks the removable tow ball into the receiver to secure it against remov...

Coated Brake Disc is a rear brake rotor for the rear-axle braking assembly, finished with a protective coating on its non-friction surfaces. The d...

Rear Lower Suspension Arm Kit (Left-Hand) is built around the left-hand rear lower control arm of the rear independent suspension. The arm locates...

Brake Disc - a front vented brake disc, the rotating friction surface the caliper pads clamp against to slow the vehicle. The internal vanes draw ...

Arm - Front Suspension

Sensor - ABS - 4.4 V8 AJ Pet

Rear Anti-Roll Bar Link for the rear stabiliser (anti-roll) bar assembly. The drop link connects the end of the anti-roll bar to the rear suspensi...

Rear Lower Suspension Arm Kit (Right-Hand) is built around the right-hand rear lower control arm of the rear independent suspension. The arm locat...

EGR Valve Gasket for the 2.7L TDV6 diesel, sealing the exhaust gas recirculation valve to the EGR cooler. It maintains a gas-tight joint in the EG...

FBH Controller (GSM) is a remote control and monitoring module for the Webasto fuel-burning auxiliary heater used on TDV6 diesel applications. It a...

Fuel Return Tube for the 2.7L TDV6 diesel engine. This tube forms part of the fuel return circuit, routing excess fuel from the injectors or fuel ...

Anti-Roll Bar Bush for the front suspension, locating the front anti-roll (stabiliser) bar to the body. The bush clamps around the bar and allows ...

Brake Shoe Set - Axle Set

Automatic Transmission Fluid for ZF 6HP Series Transmissions, supplied in a 1-litre bottle. This fluid is formulated from a blend of hydrocracked ...

Fuel Filler Door Spring for the fuel filler door and controls assembly. This spring provides the return force that holds the fuel filler door in t...

Arm - Suspension - Front - RH

Glow Plug for the diesel cold-start pre-heating circuit. The plug threads into the cylinder head with its heating element projecting into the combu...

Coolant Expansion Tank for the engine cooling system, serving as the pressurised header and overflow reservoir. The tank accommodates coolant expa...

Fuel Filler Door Latch Bezel is the trim surround that locates and frames the fuel filler flap latch within the fuel filler housing. It seats in t...

Suspension Arm for the front lower position, right-hand side, forming part of the front independent suspension assembly. The lower arm locates the...

Suspension Arm Bush is the rear hydraulically damped bush (hydrabush) pressed into the front lower suspension arm. The fluid-filled hydrabush isol...

Hex Nut - M12 - a standard M12 hexagonal nut used as a general-purpose fastener across the vehicle. The six-sided form is tightened with a standar...

Inner Tie Rod for the rack-and-pinion steering linkage. The inner tie rod threads into the end of the steering rack and houses the inner ball join...

External Torx Head Bolt, M8 x 48 mm, for the front propshaft flange. The bolt clamps the front propshaft flange to its mating drive flange. Its ex...

Bumper Retainer A quarter-turn click-type fastener that secures the bumper and radiator grille panels to the body. It locates through the mounting ...

Land Rover Oval Name Badge - Plastic - exterior identification emblem carrying the Land Rover name in gold lettering on a green ground, moulded in ...

A-Pillar Trim Clip A retaining clip used in the interior A-pillar trim assembly. It secures the A-pillar trim panel to the body structure alongsid...

Sensor Assembly

Gasket

Brake Disc - a matched pair of rear vented brake discs, the rotating friction surfaces the caliper pads clamp against to slow the vehicle. The int...

Suspension Arm for the front lower position, left-hand side, forming part of the front independent suspension assembly. The lower arm locates the ...

Brake Disc - a rear vented brake disc, the rotating friction surface the caliper pads clamp against to slow the vehicle. The internal vanes draw a...

Suspension Arm for the front lower position, right-hand side, forming part of the front independent suspension assembly. The lower arm locates the...

Front Suspension Arm, left-hand side, for vehicles equipped with Roll Stability Control (RSC). Connects the wheel knuckle to the front subframe as...

Front Lower Suspension Arm, right-hand side. Part of the independent front suspension assembly, the lower arm connects the wheel knuckle to the fr...

Anti Roll Bar Link

Heater Resistor Control Unit - regulates the speed of the heater blower motor within the HVAC (heating and ventilation) system. It modulates the c...

Cylinder Head Gasket seals the joint between the cylinder head and the engine block on the 3.0L V6 turbo diesel engine, containing combustion press...

Suspension Arm for the front lower position, left-hand side, forming part of the front independent suspension assembly. The lower arm locates the ...

Rear Brake Pad Set for the rear axle disc brakes. The friction pads are clamped by the rear brake calipers against the brake discs to generate the...