Range Rover Sport L494 Parts

Exhaust Gas Temperature Sensor for the exhaust after-treatment system of the 3.0L V6 diesel engine, fitted at the centre (middle) position. It mon...

Valve Cover Stud and Sleeve from the cylinder head cover fixings of the petrol V8 and supercharged V6 engines. The stud threads into the cylinder ...

O-Ring for the engine cooling system - it seals the water outlet tube at its connection to the cylinder block, alongside the thermostat housing. T...

Cylinder Head Gasket seals the joint between the cylinder head and the engine block on the 3.0L V6 turbo diesel engine, containing combustion press...

Timing Gear Bolt - Lower is the M16 x 70mm flanged hex bolt that retains the lower timing gear on the crankshaft. It is also listed as the cranksha...

Ignition Coil generates the high-voltage output that fires the spark plug in the ignition system. One coil is fitted per cylinder in a coil-on-plu...

Crankcase Ventilation Tube for the 3.0L V6 diesel, part of the crankcase ventilation circuit and located at the oil pan. The tube forms the sectio...

Valve Spring Retainer from the cylinder head valve train, the top cap that closes off the valve spring. It sits on top of the valve spring and is ...

Oil cooler seal, 9.5 mm diameter, sealing the small-bore oil transfer connection between the engine and the oil filter housing on the 3.0L V6 diese...

Coolant Hose for the engine cooling circuit on supercharged petrol engines. A moulded coolant line with pre-formed bends, so it seats along its in...

Gasket - Oil Cooler seals the engine oil cooler to its mounting face, within the Oil Cooler and Filter assembly. It maintains the integrity of the...

Diverter Solenoid Valve is the turbocharger compressed-air recirculation (diverter) valve in the boost-control circuit. On throttle lift-off it re...

Mirror Housing Cover for the left-hand exterior door mirror, the outer cap that fits over the mirror housing. Supplied primed and requires paintin...

Tube - Drain

Oil Seal for the oil level sensor where it passes through the wall of the oil pan (sump). The sensor is retained in the sump and this ring forms t...

Front Brake Disc with a corrosion-protective coating, for the front axle braking system. The disc forms the friction surface that the front brake ...

Plastic Rivet is a push-fit fastener that secures front engine-compartment insulation panels to the body. It locates into a pre-formed panel hole t...

Plastic Rivet is a push-fit fastener that secures front engine-compartment insulation panels to the body. It locates into a pre-formed panel hole t...

Cylinder Head Bolt secures the cylinder head to the engine block on V6 and V8 petrol engines. Threaded M11 x 178 mm. Twenty bolts are required per...

Cylinder Head Bolt secures the cylinder head to the engine block on V6 and V8 petrol engines. Threaded M11 x 178 mm. Twenty bolts are required per...

EGR Cooler Filter - filter element fitted within the exhaust gas recirculation cooler assembly of the 3.0L V6 diesel Gen2 engine. Recirculated exh...

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

Cylinder Head Gasket seals the cylinder head to the engine block on the 2.0L Ingenium four-cylinder diesel engine (AJ200 series). It seals the com...

Cylinder Head Gasket seals the cylinder head to the engine block on the 2.0L Ingenium four-cylinder diesel engine (AJ200 series). It seals the com...

Water Outlet Connection - coolant outlet component in the engine cooling circuit of the 3.0L DOHC GDI supercharged V6 petrol engine. It forms the ...

Steering Gear Connecting Rod is a steering linkage rod connecting the steering gear to the wheel-end steering arm. It transfers steering movement ...

Steering Gear Connecting Rod is a steering linkage rod connecting the steering gear to the wheel-end steering arm. It transfers steering movement ...

Timing Chain Tensioner Blade is the tensioner blade in the engine's timing chain drive. It provides the curved, low-friction face that the timing c...

Drive Chain Idler - timing gear idler sprocket for the 2.0L four-cylinder Ingenium engine family (AJ200 / AJ20 series, petrol and diesel). The idl...

Exhaust Manifold Gasket seals the exhaust manifold to the turbocharger on the 3.0L V6 diesel engine. Fitted at the manifold-to-turbocharger flange...

Front Radius Arm Bush for the front suspension radius arm. The bush is the compliant mounting at the radius arm's attachment point, locating the a...

Cylinder Head Gasket seals the joint between the right-hand cylinder head and the engine block on the 3.0L DOHC supercharged GDI V6 petrol engine. ...

Cylinder Head Gasket for the left-hand cylinder head of the 3.0L DOHC GDI supercharged V6 petrol engine. Seals the machined joint between the left...

Brake Pad Set for the rear foundation brake assembly, supplied as a complete axle set covering both rear wheels. The pads sit in the rear caliper ...

Inner Track Rod Ball Joint is the inboard steering joint that connects the steering rack to the track rod. With an M16 thread, it threads into the...

Inner Track Rod Ball Joint is the inboard steering joint that connects the steering rack to the track rod. With an M16 thread, it threads into the...

Automatic Transmission Fluid (ATF), supplied in a 1 litre container. Specified for the automatic transmission and, where applicable, the power ste...

Automatic Transmission Fluid (ATF), supplied in a 1 litre container. Specified for the automatic transmission and, where applicable, the power ste...

Cylinder Head Bolt Kit for the 2.0L Ingenium diesel engine (AJ200 / AJ20D4). Supplied as a set for renewing the cylinder head bolts when the cylin...

Cylinder Head Bolt for the 2.0L Ingenium diesel engine (AJ200 / AJ20D4), securing the cylinder head to the engine block. Supplied as a single bolt...

Wheel Cover set, fitted over the road wheels. The covers clip over the wheels to give a finished appearance and shield the wheel face from road di...