Range Rover Sport L494 Parts

Oil Filter Housing Cover for the 4.4L DOHC DITC V8 diesel (TDV8). Closes the oil filter housing within the oil cooler and filter assembly, retaini...

Gasket for the outlet joint of the Exhaust Gas Recirculation (EGR) system on the 4.4L DOHC V8 turbo diesel (TDV8) engine. Seals the EGR outlet con...

Idler Pulley for the auxiliary (accessory) drive belt on the 4.4L DOHC V8 turbo diesel (TDV8) engine. Guides the auxiliary drive belt and maintain...

Oil Filter for the 4.4L V8 turbo-diesel engine, part of the engine lubrication system. This is a replaceable filter element that fits the engine o...

Auxiliary Drive Belt Tensioner for the 4.4L DOHC DITC V8 diesel engine. Maintains correct tension on the auxiliary drive belt, applying a controll...

Exhaust Gasket for the front exhaust system on the 4.4L DOHC DITC V8 diesel engine. Seals the connection between the secondary turbocharger outlet...

Exhaust Manifold Gasket for the 4.4L DOHC V8 turbo-diesel engine. It seals the joint between the cylinder head exhaust ports and the exhaust manif...

EGR Gasket for the exhaust gas recirculation (EGR) system on the 4.4L DOHC DITC V8 diesel engine. Seals the joint between the exhaust manifold and...

EGR Gasket seals the joint between the EGR valve and the inlet manifold within the exhaust gas recirculation system. It maintains a gas-tight seal...

Turbocharger Oil Return Tube Gasket seals the oil return (drain) tube where it meets the turbocharger, within the turbocharger lubrication circuit....

Heater Line Coolant Hose for the 4.4L DOHC V8 turbo-diesel (TDV8) engine. Supplied with its connector, it carries coolant to the heater circuit fee...

Brake Caliper Locating Pin Kit for the sliding brake caliper. The guide pins let the caliper float on its carrier bracket so both brake pads wear ...

Gasket

Ignition Coil for the 2.0L four-cylinder petrol engine (AJ200 / AJ20P4, including PHEV). This is a coil-on-plug unit that mounts directly on the sp...

Radiator Hose fitted as the upper (top) hose in the engine cooling circuit, between the engine coolant outlet and the radiator inlet. Carries hot ...

Piston Ring Set for the 5.0L V8 AJ133 petrol engine, supplied at standard bore size. The ring pack seals the combustion chamber against the cylind...

Thermostat Housing Gasket seals the joint between the thermostat housing (water outlet) and the cylinder head within the cooling system. It mainta...

Thermostat and Housing for the engine cooling circuit, supplied as the thermostat pre-assembled in its housing. Regulates coolant flow to bring th...

Brake Caliper Guide Pin Dust Cover for the front and rear brake calipers. The boot fits over the caliper guide pin and seals against the carrier b...

Camshaft Position Sensor mounted in the timing gear cover, reading the toothed target on the camshaft drive to give the engine control module a dir...

Thermostat Housing for the 5.0-litre AJ133 V8 petrol engine, part of the engine cooling circuit. The housing seats the coolant thermostat and form...

Inlet Manifold Gasket - 5.0 V8 - RH seals the inlet manifold to the cylinder head on the right-hand bank of the 5.0 litre V8 petrol (AJ133) engine,...

Inlet Valve - cylinder head inlet (induction) valve for the 5.0L V8 AJ133 supercharged petrol engine. The inlet valve admits the intake charge int...

Rubber loadspace mat for the rear load compartment, part of the interior protection group. The mat is tailored to the shape of the loadspace floor...

Cover - Mirror Housing

Water Pump circulates coolant through the engine cooling system. Driven from the engine, it pumps coolant through the block, cylinder head and rad...

Heater Pipe - rigid heater manifold tube in the engine coolant circuit of the 5.0L V8 supercharged petrol engine. The pipe carries hot coolant fro...

Manifold Absolute Pressure Sensor for the 3.0L V6 diesel engine (TDV6, second generation, single and twin-turbo). The MAP sensor measures the abso...

Piston in standard size for the Ingenium AJ200D / 204DTD 2.0L 4-cylinder diesel engine. The piston runs in the cylinder bore and transfers combust...

Piston assembly - piston for the AJ133 5.0L supercharged V8 petrol engine, in the standard (nominal production) bore size. The piston runs in the ...

Rear Suspension Arm - an upper control arm in the rear multi-link suspension assembly. It connects the rear subframe to the wheel hub carrier, loc...

Coolant Flow Control Valve - regulates coolant flow within the thermostat and housing assembly. It controls circulation through the cooling circui...

Drive Belt Tensioner - maintains correct tension on the front accessory (auxiliary) drive belt. The sprung tensioner assembly applies constant loa...

Rear Brake Disc - vented - for the rear axle braking assembly. The internal vane structure between the two friction faces channels airflow through ...

Rear Air Spring - the right-hand rear air spring (air bellows) of the electronic air suspension system. It supports the rear corner load in place o...

Piston - 0.50 mm Oversize for the 2.0-litre Ingenium (AJ200D / 204DTD) diesel engine. An engine-rebuild piston machined 0.50 mm over the standard ...

Heater Manifold - the rigid coolant tube running from the engine block to the heater inlet hose on the 3.0L DOHC GDI supercharged V6 petrol engine,...

Coolant Expansion Tank - the pressurised header and overflow reservoir of the engine cooling system. The tank takes up the coolant volume displace...

Range Rover Sport SVR Scale Model - a 1:76 scale diecast model of the Range Rover Sport SVR, finished in Indus Silver. The model reproduces the Sp...

Range Rover Sport SVR Scale Model - a 1:76 scale diecast model of the Range Rover Sport SVR, finished in Fuji White. The model reproduces the Spor...

Camshaft is the inlet camshaft for the 2.0L 16V TiVCT turbocharged petrol engine. It operates the intake valves, running in the cylinder head and ...

Piston Ring Set in standard size for the Ingenium AJ200D / 204DTD 2.0L 4-cylinder diesel engine. The rings seal the combustion chamber against the...