Range Rover Sport L494 Parts

Exhaust Manifold Gasket - left-hand bank gasket sealing the joint between the cylinder head exhaust ports and the exhaust manifold. It contains co...

Front Anti-Roll Bar Bush for the front stabilizer bar mounting. This bush (insulator) locates the front anti-roll bar to the vehicle structure, al...

Front Crankshaft Oil Seal for the Ingenium engine family, sealing the crankshaft nose where it passes through the front cover. The seal runs on th...

Exhaust Manifold Gasket, left-hand bank - the sealing joint between the cylinder head exhaust ports and the exhaust manifold on the 3.0L DOHC super...

Rear Upper Suspension Arm for the rear multi-link suspension assembly. The arm locates the upper end of the wheel carrier relative to the rear sub...

Exhaust Manifold Gasket, right-hand bank - the sealing joint between the cylinder head exhaust ports and the exhaust manifold on the 3.0L superchar...

Anti-Roll Bar Link - Rear - RH - connecting link between the rear anti-roll bar and the rear suspension, right-hand side. The link feeds the diffe...

Rear Crankshaft Oil Seal and Retainer forms the oil-tight closure at the flywheel end of the cylinder block, within the Cylinder Block and Cranksha...

Inlet valve stem seal for the cylinder head valve train. The seal is pressed onto the inlet valve guide boss and wipes the valve stem as it recipr...

Oil Filter Element for the 3.0L AJ20 / AJ22 Ingenium six-cylinder engine, fitted in the engine lubrication circuit. The cartridge element seats in...

EGR Inlet Gasket for the exhaust gas recirculation circuit of the 2.0L I4 AJ200 Ingenium diesel engine. The gasket seals the EGR inlet joint on th...

Oil Cooler Gasket for the engine oil cooler and filter housing assembly on the 4.4L DOHC DITC V8 diesel. Seals the joint face between the oil filt...

Front Brake Pad Set - friction pads for the front disc brake assembly. The pads locate in the front caliper and are clamped against the brake disc...

Timing Cover Blanking Plug - threaded plug that closes an aperture in the front timing cover of the 2.0L Ingenium petrol engine (AJ200 / AJ20P4, al...

Rear Crankshaft Oil Seal and Retainer forms the oil-tight closure at the flywheel end of the cylinder block, within the Cylinder Block and Cranksha...

O-Ring - VVT Solenoid Cover, 47 mm, sealing the variable valve timing solenoid cover to the cylinder head on Ingenium engines - 2.0L AJ20P and AJ20...

Coolant outlet tube forming the water outlet connection at the cylinder head, in the engine cooling circuit of the 2.0L I4 AJ200 Ingenium petrol en...

Coolant Temperature Sensor mounted in the cylinder head coolant gallery, part of the engine cooling and engine management system. The sensor is a ...

Cable Connector - an electrical connector used in the vehicle wiring harness. The connector forms the termination between a harness cable and its ...

Front Anti-Roll Bar Bush for the front stabilizer bar mounting. This bush (insulator) locates the front anti-roll bar to the vehicle structure, al...

Exhaust Gas Pressure Sensor - measures gas pressure in the exhaust gas recirculation circuit, mounted on the right-hand side of the engine. The en...

Oil Filter Element for the 3.0L AJ20 / AJ22 Ingenium six-cylinder engine, fitted in the engine lubrication circuit. The cartridge element seats in...

Service PCV Kit

Bracket - Fender Mounting

Inlet valve stem seal for the cylinder head valve train. The seal is pressed onto the inlet valve guide boss and wipes the valve stem as it recipr...

Mini Relay with four blade terminals, rated at 40 amp. A four-terminal mini relay switches a single normally-open high-current circuit under the c...

Glow Plug - the pre-heat element for one cylinder of the 2.0L four-cylinder AJ200 / AJ20D4 diesel engine, threaded into the cylinder head so its ti...

Valve Stem Seal, Exhaust - cylinder head valve train of the 2.0L 16-valve TiVCT turbocharged petrol engine. Fits over the exhaust valve stem at th...

Stop light switch for the brake pedal box assembly. The switch mounts in the pedal box behind the brake pedal and is operated by the pedal arm as ...

Mini Relay with four blade terminals, rated at 70 amp, grey housing. A four-terminal mini relay switches a single normally-open high-current circu...

Oil Filter Gasket from the oil cooler and filter housing assembly of the 4.4L DOHC DITC V8 diesel. The gasket seals the oil filter housing against...

Grille - Dirty Air Duct for the engine air intake and filtration assembly. Fits over the mouth of the dirty air duct on the front fender support, ...

Door Lock Cap - Front closes off the lock mechanism aperture at the end of the front exterior door handle. It belongs to the front door exterior h...

Coolant Bleed Hose - small-bore hose in the engine cooling system, running from the cylinder head bleed point to the coolant expansion tank. It ve...

Oil Filter Gasket from the oil cooler and filter housing assembly of the 4.4L DOHC DITC V8 diesel. The gasket seals the oil filter housing against...

Glow Plug - cold-start pre-heating system of the 2.0L Ingenium AJ200 four-cylinder turbo diesel engine. Threads into the cylinder head, one per cy...

Oil Filter Element for the 3.0L AJ20 / AJ22 Ingenium six-cylinder engine, fitted in the engine lubrication circuit. The cartridge element seats in...

Camshaft Cover Gasket - moulded gasket sealing the camshaft cover to the cylinder head. It seals the valve train and cam carrier area against oil ...

O-Ring - VVT Solenoid Cover, 47 mm, sealing the variable valve timing solenoid cover to the cylinder head on Ingenium engines - 2.0L AJ20P and AJ20...

Coolant outlet tube forming the water outlet connection at the cylinder head, in the engine cooling circuit of the 2.0L I4 AJ200 Ingenium petrol en...

Oil Cooler Gasket from the oil cooler and filter housing assembly of the 4.4L DOHC DITC V8 diesel. The gasket seals the joint between the oil filt...

Ceramic Glow Plug - cold-start heating element from the diesel pre-heat system, threaded into the cylinder head with the tip projecting into the co...

Timing Chain Guide, Lower Primary from the front timing gear assembly. It bears against the primary drive chain on the run between the crankshaft ...

Oil Filter Element for the 3.0L AJ20 / AJ22 Ingenium six-cylinder engine, fitted in the engine lubrication circuit. The cartridge element seats in...

Mini Relay with four blade terminals, rated at 70 amp, grey housing. A four-terminal mini relay switches a single normally-open high-current circu...

EGR Inlet Gasket for the exhaust gas recirculation circuit of the 2.0L I4 AJ200 Ingenium diesel engine. The gasket seals the EGR inlet joint on th...