Range Rover Sport L494 Parts

Engine mounting bracket for 3.0L six-cylinder petrol applications - supercharged DOHC GDI V6 and AJ20P6 Ingenium. The bracket bolts to the side of...

Front Propshaft Flange in the front driveline, coupling the front propeller shaft to the transfer case output on vehicles fitted with a two-speed t...

Kit - Caliper Brake Pad

Manifold Absolute Pressure (MAP) Sensor - an engine-management sensor mounted on the inlet manifold of the 4.4L DOHC DITC V8 diesel engine. The se...

Timing Chain Tensioner for the timing chain drive of the 5.0L V8 (AJ133) and 3.0L supercharged V6 petrol engines. It bears against the timing chain...

Camshaft Sprocket for the timing drive of the Ingenium engine family - the 2.0L and 3.0L diesel and 3.0L petrol units. Mounted on the end of the ca...

Crankshaft Seal - Rear - 1.5 mm seals the rear of the crankshaft where it exits the cylinder block at the flywheel and drive plate end. Supplied c...

Drive Belt Tensioner for the primary accessory drive at the front of the engine. The spring-loaded tensioner holds the correct tension on the belt ...

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

Drive Belt Tensioner for the secondary (supercharger) belt drive fitted to the supercharged petrol V6 and V8 engines. It uses a spring-loaded pivot...

EGR Cooler Hose for the exhaust gas recirculation (EGR) circuit on the 3.0L 24V DOHC V6 turbo diesel engine. It carries engine coolant to the EGR ...

Manifold Absolute Pressure (MAP) Sensor for the 3.0L V6 diesel engine. Mounted on the throttle housing, it measures the absolute pressure in the i...

Water pump for the 3.0L V6 diesel (TDV6 / SDV6). It drives coolant circulation through the cylinder block and heads, out through the radiator circu...

Brake Discs - Front - Pair for the front disc brake assembly. Each disc bolts to the front wheel hub and rotates with the wheel; the brake caliper ...

Brake Pad Caliper Kit

Oil Filter and Cooler is a combined assembly within the engine lubrication circuit, integrating the oil filter housing with the engine oil cooler. ...

Oil Filter and Cooler is a combined assembly within the engine lubrication circuit, integrating the oil filter housing with the engine oil cooler. ...

Fuel Injector for the 5.0L V8 AJ133 petrol engine. It meters and atomises fuel for combustion under the control of the engine management system. O...

Oil Pump, the pump at the heart of the engine lubrication system. Driven by the engine, it draws oil from the sump and delivers it under pressure ...

Oil Pump, the pump at the heart of the engine lubrication system. Driven by the engine, it draws oil from the sump and delivers it under pressure ...

Brake Pad Set

Brake Pad Set - Front Brakes

Bolt - a structural fastener used at chassis and front suspension mounting points, including the front cross member and stabiliser bar crossmember,...

Oil Filter Housing Cover is the cover for the cartridge-type oil filter assembly on 3.0 GDI petrol and 5.0 AJ-V8 engines. This cover retains the r...

Crankshaft Trigger Wheel for the engine timing and crankshaft position system. The trigger wheel (reluctor ring) mounts on the crankshaft and provi...

Transmission Oil Cooler Pipe for models fitted with the ZF 8-speed automatic gearbox. The rigid tube carries automatic transmission fluid between ...

Ride Height Sensor - electronic air suspension height sensor. The sensor links the suspension arm to the body and continuously reports the ride he...

Water Pump for the 4.4L DOHC V8 turbo-diesel (TDV8) engine. It circulates coolant through the engine block, cylinder heads and radiator to maintain...

Brake Disc - front axle, internally vented. The disc provides the friction surface that the front brake pads clamp against, converting the vehicle...

Fuel Pump Drive Belt Kit for the rear accessory drive of the 3.0L V6 diesel engine. The belt transmits drive to the high-pressure fuel injection p...

Window Control Switch - twin-rocker switch pack for the front driver's door, part of the door trim electrical switch assembly. The unit carries tw...

Crankshaft Pulley with integral torsional vibration damper, mounted on the crankshaft nose of the 2.0L Ingenium AJ200 four-cylinder petrol and dies...

Water Pump is part of the engine cooling system. It circulates coolant through the cylinder block, cylinder head and radiator to carry heat away f...

Wheel Hub is part of the wheel-end assembly at the suspension corner. It carries the wheel bearing and provides the mounting flange for the road w...

Passive Start Module is part of the keyless (passive) start and vehicle anti-theft system. It authenticates the smart key fob and allows the engin...

A/C Compressor Line Tube is a refrigerant line in the air-conditioning circuit, routing between the compressor and the condenser. It carries refri...

Front Seat Cushion Heating Element - the heating pad fitted within the cushion (base) of a front seat. It forms part of the heated-seat circuit, wa...

Symposer intake sound resonator for the 5.0L supercharged V8 petrol engine (AJ133). The symposer draws pressure pulses from the inlet manifold and...

Front Brake Pad Set - the friction pads for the front-axle disc brakes. The pads sit in the caliper and are clamped against the brake disc by the c...

Front Brake Pad Set - the friction pads for the front-axle disc brakes. The pads sit in the caliper and are clamped against the brake disc by the c...