Land Rover Parts

Alternator is the engine-driven charging unit in the vehicle's electrical system. Driven by the accessory belt from the crankshaft pulley, it gene...

Intercooler is the charge-air cooler in the turbocharger induction circuit. Mounted in the airflow at the front of the vehicle, it cools the compr...

Anti-Roll Bar Mounting Bush is the front stabiliser-bar bush that clamps the anti-roll bar into its chassis mounting bracket. It locates the bar l...

Insulator - Stabilizer Bar

Tailgate Gas Strut for the rear tailgate/upper door assembly. The pressurised strut supports the weight of the raised tailgate, assisting the lift...

Crankshaft Position Sensor for the 3.2L DOHC petrol inline-six (MPI) engine, part of the engine management system. The sensor reads a toothed relu...

Crankshaft Position Sensor for the 3.2L DOHC petrol inline-six (MPI) engine, part of the engine management system. The sensor reads a toothed relu...

Fuel Tank Filler Cap closes the fuel filler neck on petrol applications. It seals the top of the filler pipe to retain fuel vapour and maintain ta...

Oxygen Sensor (lambda sensor) in the exhaust system of the 2.0L 16V turbocharged petrol engine. The sensor measures the oxygen content of the exha...

Piston Assembly for the 2.2L diesel engine (DW12). The piston reciprocates within the cylinder bore, transmitting combustion pressure through the ...

Accessory Drive Idler Pulley - Lower in the front end accessory drive (FEAD) belt system of the 2.0L 16V turbocharged petrol engine. The lower idl...

Accessory Drive Idler Pulley - Lower in the front end accessory drive (FEAD) belt system of the 2.0L 16V turbocharged petrol engine. The lower idl...

Crankcase Ventilation Hose forms part of the crankcase ventilation (PCV) system, carrying blow-by gases from the crankcase to the engine intake. F...

Caliper Seal Kit renews the hydraulic seals of the front brake caliper. The kit is used when reconditioning the front brake caliper, replacing the...

Rear Brake Caliper for the left-hand side, part of the rear disc brake assembly. The caliper houses the brake pads and hydraulic piston, clamping ...

Rear Brake Caliper for the right-hand side, part of the rear disc brake assembly. The caliper houses the brake pads and hydraulic piston, clamping...

Thermostat and Housing assembly for the 2.0L 16V TIVCT turbocharged petrol (GTDi) engine. The thermostat regulates coolant flow to bring the engine...

Thermostat Housing Gasket for the 2.0L 16V TIVCT turbocharged petrol (GTDi) engine. It seals the thermostat housing against the engine within the c...

Thermostat and Housing for the 2.0L 16V Ti-VCT petrol engine, supplied complete as a sealed assembly. It sits in the engine cooling circuit and reg...

Electronic Parking Brake Actuator for the electronic parking brake (EPB) system. This motor-driven module replaces the conventional handbrake lever...

Brake Disc - Front, vented single disc. Fitted to the front hub and rotating within the brake caliper assembly, the disc forms the friction surfac...

Brake Disc - Front, vented single disc. Fitted to the front hub and rotating within the brake caliper assembly, the disc forms the friction surfac...

Front Brake Disc, vented and cross-drilled and grooved (CDG), forming part of the front axle braking assembly. The vented rotor aids heat dissipat...

Brake Disc - Coated - Front, vented single disc with corrosion-protective surface coating. Fitted to the front hub and rotating within the brake c...

Brake Disc - Front, vented single disc. Fitted to the front hub and rotating within the brake caliper assembly, the disc forms the friction surfac...

Power Steering Pressure Hose within the power steering hydraulic circuit. It carries pressurised fluid from the power steering pump to the steering...

Cooling Fan and Motor Assembly is the engine cooling fan unit that draws air through the radiator to control coolant temperature. The assembly com...

Switch - Solenoid Control is a solenoid control switch located on the cylinder head of the 3.2L inline-six petrol engine. Two are fitted per engine.

Exhaust Manifold Gasket seals the joint between the turbocharger and the exhaust manifold, containing exhaust gas at the flanged connection. Fitte...

Exhaust Manifold Gasket seals the joint between the turbocharger/exhaust manifold and the cylinder head, containing exhaust gas at the port face. ...

Turbocharger Mounting Nut is a fastener used in the turbocharger mounting assembly, clamping the turbocharger against its gasketed joint at the fla...

Valve Cover Gasket seals the joint between the camshaft cover and the cylinder head on the 2.0L 16V turbocharged petrol engine. It forms the oil-t...

Valve Cover Gasket seals the cylinder head cover (rocker cover) to the cylinder head on the 2.0L 16V petrol engine. It forms the oil-tight joint a...

Oil Filler Cap seals the engine oil filler opening on the camshaft cover of the 2.0L 16V turbocharged petrol engine. It closes the point where eng...

VVT Solenoid is the exhaust-camshaft variable valve timing control solenoid for the 2.0L 16V turbocharged petrol engine. Acting on signals from th...

Oil Separator is the crankcase ventilation (PCV) oil separator for the 2.0L 16V turbocharged petrol engine. It sits in the crankcase breather circ...

Oil Separator is the crankcase ventilation (PCV) oil separator for the 2.0L 16V turbocharged petrol engine. It sits in the crankcase breather circ...

Oil Separator is the crankcase ventilation (PCV) oil separator for the 2.0L 16V turbocharged petrol engine. It sits in the crankcase breather circ...

Tail Lamp Assembly is the complete rear lamp unit for the left-hand (LH) side, supplied as a single serviceable assembly comprising the lens, housi...

Rear Tail Lamp Assembly, right-hand (RH) side. This is the complete rear lamp unit that fits into the rear body panel, providing the vehicle's rear...