Land Rover Parts

Front Lower Suspension Arm is the left-hand lower control arm (wishbone) of the front suspension. It locates the front wheel hub carrier to the su...

Suspension Arm - Front - RH is the right-hand front lower suspension arm, locating the front hub carrier to the subframe and setting front wheel ge...

Crankshaft Pulley mounts on the nose of the crankshaft at the front of the engine and drives the front-end accessory belt. Fitted to the 2.0L 16V ...

Crankshaft Pulley mounts on the front of the crankshaft of the 2.0L 16V Ti-VCT turbocharged petrol engine (240PS). It transfers drive from the cra...

MacPherson Strut is the front suspension damper, forming the main vertical strut that locates the front wheel and controls its vertical movement. ...

Wiper Blade - Front - LHD - RH for the front windscreen wiper assembly. It clips to the wiper arm and clears the driver's sweep area of the windscr...

Wiper Blade for the front windscreen, fitted to the left-hand wiper arm on left-hand-drive vehicles. It forms part of the windscreen wash/wipe sys...

Wiper Blade clears the front windscreen as part of the wash/wipe system. It is the front blade fitted to the left-hand wiper arm, sweeping the pas...

Wiper Blade clears the front windscreen as part of the wash/wipe system. It is the front blade fitted to the right-hand wiper arm, sweeping the dr...

A Pillar Finisher – Outer is the external trim that covers the A-pillar, within the front door, hinges and weatherstrip assembly. It caps the oute...

A Pillar Finisher – Outer is the external trim that covers the A-pillar, within the front door, hinges and weatherstrip assembly. It caps the oute...

Bypass Tube carries engine coolant on the bypass path, within the thermostat and housing assembly of the cooling circuit. It routes coolant around...

Filler Plug closes the lubricant aperture on the axle case, within the front and rear axle and differential assembly. It seals the oil fill and le...

Air Hose routes air within the turbocharger intake system, forming part of the charge-air ducting. It carries air along the turbocharger air path,...

Turbocharger Air Hose for the 2.0L 16-valve turbocharged petrol engine. It carries charge air within the turbocharger induction circuit, connecting...

Coupling Pump is the electro-hydraulic pump that operates the rear axle all-wheel-drive coupling, generating the hydraulic pressure that engages th...

Front Door Latch Release Cable connects the interior front door handle to the door latch, within the front door lock assembly. When the inner hand...

Oil Cooler, part of the engine lubrication system. It draws heat out of the engine oil to hold oil temperature within its operating range under su...

Turbocharger Oil Return Hose carries lubricating oil from the turbocharger back to the engine, within the turbocharger oiling circuit. It returns ...

Cylinder Head Bolt clamps the cylinder head to the engine block, within the cylinder head assembly. It holds the head against the block and head g...

Radiator is the engine coolant radiator, mounted at the front of the vehicle within the cooling pack. It transfers heat from the circulating coola...

Condenser is the air conditioning condenser, mounted at the front of the vehicle ahead of the cooling pack. It dissipates heat from the refrigeran...

Manifold Absolute Pressure (MAP) Sensor mounted on the inlet manifold, part of the engine management system on the 2.0L 16-valve turbocharged petro...

Load Space Cord Hook Pin is a fixing used in the rear load compartment trim. It retains the load-space cord hook and secures the associated packag...

Rear Stop and Flasher Lamp for the left-hand side of the rear lamp assembly. This lamp unit combines the brake (stop) light and the direction indi...

Rear Stop and Flasher Lamp, right-hand side, part of the rear lighting cluster. The unit combines the brake (stop) lamp and the rear direction ind...

Turbocharger Assembly for the 2.0L 16V TiVCT GTDI turbocharged petrol engine (240PS). The turbocharger forms part of the forced-induction system, r...

Exhaust Gas Temperature Sensor monitors exhaust gas temperature within the exhaust and emissions system. Mounted on the exhaust manifold or turboc...

Intake Manifold Gasket seals the joint between the intake manifold and the cylinder head, within the air intake assembly. It maintains an airtight...

Temperature Sensor monitors engine coolant temperature from its mounting in the cylinder block, within the Cylinder Block and Plugs assembly. The ...

Camshaft Position Sensor monitors camshaft rotation for the engine management system. Mounted in the cylinder head and camshaft cover, it signals ...

O-Ring for the oil filter and cooler assembly. It seals a connection within the oil cooler and filter assembly, maintaining oil-tight integrity at...

Cover Gasket for the upper timing chain cover. It seals the joint between the upper timing chain cover and the engine, maintaining an oil-tight se...

Upper Timing Cover Gasket seals the upper timing chain cover to the cylinder head on the 2.0L Ingenium diesel engine (AJ200D / AJ20D4). It forms t...

Sealing Ring sealing a joint within the engine timing gear covers. This O-ring seals a connection at the timing cover assembly, maintaining oil-ti...

Camshaft Cover Gasket sealing the camshaft cover to the cylinder head. It seals the joint between the camshaft (cylinder head) cover and the cylin...

Inlet Valve is a poppet valve in the cylinder head of the 2.0L Ingenium diesel engine (AJ200D / AJ20D4 / AJ21D4). Seated in the intake port, it op...

Exhaust Valve is a poppet valve in the cylinder head of the 2.0L Ingenium diesel engine (AJ200D / AJ20D4 / AJ21D4). Seated in the exhaust port, it...

Valve Stem Seal for the cylinder head valvetrain. It seals around the valve stem where it passes through the valve guide, controlling oil entry in...