Land Rover Parts

Hub Bearing

Primary Fuel Filter - diesel fuel supply circuit, mounted in-line in the fuel lines between the tank and the engine. As the first filtration stage...

Vacuum Pump Gasket sealing the vacuum pump to the engine. Forms the joint between the vacuum pump and its mounting face, maintaining the seal for ...

Lower Timing Gear Belt for the engine timing system on the 3.0L V6 Diesel Gen 2 engine. This belt drives the lower timing gear assembly on the fro...

Oil Filter Element and Seal

Water Outlet Connection for the engine cooling system, forming a coolant outlet from the engine. The connection provides the port and hose union t...

Camshaft Sprocket is a timing drive gear in the valvetrain, mounted on the end of a camshaft. Driven by the timing chain from the crankshaft, it r...

Radiator Hose - Engine Vent Elbow forms the vent connection between the engine and the radiator within the cooling system pipes and hoses. The elb...

Supercharger Repair Kit for the 3.0L supercharged V6 petrol engine - the front-end overhaul kit for the belt-driven supercharger. The supercharger...

Brake Pad Set

Drive Belt - V-belt in the front-end accessory drive of the 3.0L Ingenium six-cylinder petrol engine, driving the belt-integrated starter generator...

Rear Brake Pad Set - friction pads for the rear disc brake assembly, supplied less springs. The pads locate in the rear caliper carrier and are cl...

Alternator - belt-driven charging unit for the supercharged 3.0L V6 and 5.0L V8 petrol applications. Driven from the crankshaft by the front end a...

Suspension Arm - front lower control arm (wishbone) forming part of the front suspension, locating the wheel hub carrier to the subframe and contro...

Oil Pump, the pump at the heart of the engine lubrication system. Driven by the engine, it draws oil from the sump and delivers it under pressure ...

Radiator Ventilation Hose vents the cooling system at the radiator, within the cooling system pipes and hoses. It allows air to bleed from the coo...

Turbo Gasket sealing the joint between the exhaust manifold and the turbocharger. The same gasket seals both the exhaust manifold and the turbocha...

Coolant Expansion Tank Cap - pressure cap sealing the coolant expansion (overflow) container in the engine cooling circuit. The cap is a working c...

Ignition Coil for the 2.0L four-cylinder petrol engine (AJ200 / AJ20P4, including PHEV). This is a coil-on-plug unit that mounts directly on the sp...

Drive Chain Idler - timing gear idler sprocket for the 2.0L four-cylinder Ingenium engine family (AJ200 / AJ20 series, petrol and diesel). The idl...

Coolant Expansion Tank - the header and overflow reservoir of the engine cooling circuit. It receives coolant displaced from the radiator and engi...

Anti-Roll Bar Link connects the front anti-roll bar to the suspension within the front suspension assembly. Mounted at the front cross member, it ...

Crankshaft position sensor for 3.0L V6 and 4.4L V8 diesel engines, part of the engine management sensing circuit. The sensor sits at the crankshaf...

Glow Plug - the pre-heat element for one cylinder of the 2.0L four-cylinder AJ200 / AJ20D4 diesel engine, threaded into the cylinder head so its ti...

O-Ring for the Exhaust Gas Recirculation (EGR) circuit. This seal maintains a gas-tight joint within the EGR section, sealing the connection betwe...

Fuel Injector Sealing Washer for the fuel injection system. Seals the fuel injector against the cylinder head, maintaining the combustion seal and...

ABS Sensor - front wheel speed sensor, part of the anti-lock braking and vehicle dynamics sensing circuit. The sensor mounts at the front hub carr...

Clip is a fastening used within the body moulding assembly, retaining exterior trim and moulding panels against the bodywork.

Accessory Drive Belt for the front end accessory drive of the 2.0L Ingenium four-cylinder engine (AJ200 / AJ20P4, petrol and diesel applications). ...

Front Lower Suspension Arm, left-hand (LH) side, part of the front independent suspension assembly. The lower control arm connects the front wheel...

Front wheel hub with bearing, part of the front knuckle and hub assembly. The hub locates in the steering knuckle and carries the road wheel and b...

Idler Pulley for the front-end accessory belt drive, 90mm diameter. The idler routes and guides the auxiliary drive belt around the accessory pull...

Crossover Pipe Gasket for the exhaust system, sealing the joint between the exhaust crossover pipe and the exhaust manifold. On the 3.0L V6 (Gen2 ...

Camshaft Sprocket is a timing-drive gear in the valve train of the 2.0L Ingenium diesel engine (AJ200D). Mounted on the end of the camshaft, it is...

Suspension Arm - the rear lower control arm on the right-hand side of the independent rear suspension assembly. It links the rear subframe to the ...

Sealing Ring sealing a joint within the engine timing gear covers. This O-ring seals a connection at the timing cover assembly, maintaining oil-ti...

Antifreeze and Coolant Concentrate - red, extended-life engine coolant concentrate for the cooling system, supplied in a 1 litre container. The fl...

Brake Pad Wear Sensor monitors rear brake pad wear, fitted to the rear brake pads within the rear disc and caliper assembly. As the friction mater...

Heater Manifold - the rigid coolant tube running from the engine block to the heater inlet hose on the 3.0L DOHC GDI supercharged V6 petrol engine,...

Anti-Roll Bar Link connects the rear anti-roll bar to the suspension within the rear suspension assembly. It transfers load between the stabiliser...

Cylinder Head Gasket for the right-hand cylinder bank of the 3.0L supercharged V6 petrol engine (DOHC GDI). It seals the cylinder head to the engin...

Cylinder Head Gasket for the 2.0L I4 (AJ200 / AJ20D4) diesel engine. It seals the joint between the cylinder head and the engine block, sealing com...

Cylinder Head Gasket for the left-hand cylinder bank of the 3.0L supercharged V6 petrol engine (DOHC GDI). It seals the cylinder head to the engine...

Water Valve - coolant control valve in the auxiliary fuel-fired pre-heater circuit. The valve opens and closes the heater loop against the main en...

Throttle Body and Motor for the engine intake assembly on the 3.0L V6 Diesel Gen 2 engine. This assembly houses the throttle valve and its integra...

Bolt securing the fuel injector and high-pressure fuel pipe assembly on the engine fuel system. It clamps the injector and high-pressure pipe unio...