Products

Heater Inlet Hose carries hot coolant from the engine to the inlet side of the heater matrix. Part of the heater coolant circuit, it feeds the mat...

Seat Belt Assembly - three-point inertia reel front seat belt for the right-hand front seat, part of the occupant restraint system. The inertia re...

Front Seat Belt Assembly - the left-hand front inertia-reel belt, part of the front seat belt restraint system for soft-top configurations. It is ...

Front Seat Belt Assembly - the left-hand front inertia-reel belt, part of the front seat belt restraint system for soft-top configurations. It is ...

Air Conditioning Compressor for the R134a air-conditioning system. Belt-driven from the engine, it pressurises and circulates refrigerant around th...

Body-Side Name Plate, a moulded plastic decal applied to the body side. Fitted as exterior body-side trim identifying the V8 petrol variant.

Heater Distribution Control Cable - the Bowden cable that links the dashboard heater control to the air-distribution flap in the heater assembly. ...

Demister Outlet Finisher - vent finisher set into the top of the dashboard over the windscreen demister outlet, directing heated and ventilated air...

Rivet used to secure exterior body panels and mouldings, including front wing and body-moulding assemblies. Installed through the panel to retain ...

Gear Knob - gear lever knob for the R380 5-speed manual gearbox. Threads onto the gearchange lever, forming the driver's hand grip and gear-select...

Transmission Tunnel Cover - a moulded rubber cover that fits over the transmission tunnel in the front floor, between the driver and passenger foot...

Decal - ZF Automatic Gearbox is an adhesive identification label associated with the ZF automatic transmission, located in the centre console and c...

Door Trim - Rear Casing - Slate Grey for the Defender rear end door interior. This rear door casing panel fits the interior face of the Defender r...

Rear Door Trim Panel - Dark Granite for the Defender interior door trim assembly. This panel fits the rear door (tailgate) on Defender models equi...

Instrument Finisher for the left-hand side of the facia (dashboard) instrument panel. The finisher frames and trims the instrument area, retaining...

Headlamp Bulb - a 24V dual-filament bulb for the main headlamp, rated 55/50W with a P45T base. The two filaments carry the main and dipped beam wi...

Caliper Bolt is the fixing bolt that secures the brake caliper to its mounting bracket. The same bolt specification is used across several chassis...

Hexagon Bolt - an M10 x 45 mm high-tensile bolt, property class 10.9, used in the suspension top link, fulcrum and ball joint assembly. The 10.9 g...

Bolt, M10 x 45 securing the front drive member to the hub. The drive member transmits torque from the axle shaft to the road wheel, and these bolts...

Camshaft Bolt for the 2.5L 300 Tdi diesel engine. Retains the camshaft drive gear on the camshaft within the timing drive.

Hexagon Bolt - an M16 x 100 mm high-tensile bolt, property class 10.9, used to secure the front radius arm. The 10.9 grade provides the high clamp...

Bolt - threaded fastener with a 7/16" UNF (Unified National Fine) thread and a 2-1/4" length.

Link Clip - an anti-rattle clip for the side door latch linkage. It retains the latch operating rod within the door lock mechanism, holding the li...

Split Pin is a cotter-type retaining pin used to lock a clevis pin or pivot pin in position. It passes through the cross-drilled end of the pin an...

Tailgate Cable is a retaining cable for the drop-down rear tailgate on pick-up bodies. It links the rear body panel to the tailgate and limits how...

Bolt - Rear Door Hinge is an M8 x 25 threaded fastener used to secure the rear end door hinge to the body aperture. It forms part of the rear end ...

Torx Pan Head Bolt, M8 x 50. A pan head bolt with a Torx drive recess, used as a body and hinge fixing - including the cable-operated bonnet assem...

Hinge bolt Defender Torx

Hinge Bolt - M8 x 55 mm Torx-head bolt that secures the side door hinges and door check strap to the body. Fastens the hinge assembly at the door.

Torx Bolt from the Land Rover fixings and fasteners range. A Torx-drive bolt for use in Land Rover assembly applications requiring a Torx head fix...

Door Hinge Bolt, M8 x 55. Secures the front or rear side door hinge to the body.

Bolt - Torx - Countersunk - Rear Door Hinge is a countersunk Torx-head bolt used to secure the rear side door hinge and check strap. It retains th...

Rear Door Hinge Bolt - Lower - Torx 95mm is a 95 mm Torx-head bolt used at the lower fixing point of the rear side door hinge and check strap. It ...

Bolt - M8 x 50 - Torx is an M8 threaded fastener, 50 mm long, with a Torx drive head. It is used as a general-purpose fixing across a range of bod...

Caged Nut securing the front door hinge to the body pillar. The nut is held in a floating sheet-metal cage that retains it against the panel and l...

Lock Nut from the rear end-door grab handle assembly on the Defender. This lock nut secures the grab handle fitted to the rear end door. One nut p...

Screw - Bonnet Hinge - M6 x 20 for the bonnet hinge assembly on the Defender. This M6 x 20 Torx-head screw secures the bonnet hinge. Used on vehic...

Door Latch Striker Screw - fixing screw that secures the door latch striker to the body pillar. The striker is the catch the door latch engages to ...

Door Latch Striker Screw - fixing screw that secures the door latch striker to the body pillar. The striker is the catch the door latch engages to ...

Flanged Head Screw used in the door latch mechanism and the tailgate lock control assembly. The integral flange spreads clamping load, removing th...

O-Ring for the R380 five-speed manual gearbox extension case. Seals the oil pump within the gearbox extension housing.

Grommet - moulded rubber grommet for a panel or component aperture. Fitted into a drilled or pressed hole to line the opening, it provides a seal ...

Castor Correction Kit - 44mm Wide Bush for the front suspension radius arm assembly on the Defender, Discovery 1, and Range Rover Classic. Lifting...

Rear Mud Flap Bracket in stainless steel. This bracket mounts the rear mud flap to the vehicle, holding it in position behind the rear wheel. Made...

Stainless Bracket Only - Defender 110 130