Products

Exhaust Valve for the cylinder head valvetrain of the 200TDi and 300TDi 2.5L turbo diesel engines. It seats in the cylinder head exhaust port and ...

Inlet Valve for the cylinder head valvetrain of the 200TDi 2.5L 4-cylinder turbo diesel engine. The valve seals against its seat in the cylinder h...

Oil Pump - 200Tdi is the engine-driven pump responsible for circulating pressurised oil throughout the lubrication system of the 200Tdi 2.5L direct...

Front cover gasket 200tdi Discovery/RR

Banjo Bolt (6mm) for the fuel injector leak-off return circuit on the 200TDi and 300TDi 2.5L turbo diesel engines. The hollow bolt clamps the inje...

Rocker Arm operates on the rocker shaft in the 200TDi diesel valvetrain. Driven by the pushrod, it transfers camshaft motion to actuate the valve.

Rocker Arm Bush is the bearing bush pressed into the rocker arm, carrying it on the rocker shaft. Fitted to 200TDi and 300TDi diesel valvetrains.

Exhaust Manifold Gasket for the 200 TDi diesel engine, sealing the joint between the exhaust manifold and the cylinder head. It seals each exhaust...

Exhaust Manifold Gasket for the 200 TDi diesel engine, sealing the joint between the exhaust manifold and the cylinder head. It seals each exhaust...

Spacer for the rocker shaft assembly, within the cylinder head valvetrain. It fits over the rocker shaft between the rocker arms to set and mainta...

O-Ring seals the joint between the sump and the ladder-frame assembly on the 2.5L 200TDi diesel engine.

Exhaust Downpipe is the cast front section of the exhaust system for the 200TDi and 300TDi diesel engines. It bolts to the turbocharger outlet and...

Copper Sealing Washer used to seal a threaded or banjo joint in the fuel and lubrication circuits. The soft copper deforms under tightening to con...

Coolant Bypass Hose for the engine cooling system of the 200 TDi diesel engine. It carries coolant along the bypass path so that flow continues to...

Piston at standard bore size for the 2.5-litre 200TDi turbo diesel engine. The piston runs in the cylinder bore and transfers combustion pressure ...

Bypass Hose for the engine cooling system of the 200 TDi diesel engine, connecting into the coolant pump. It carries coolant on the bypass route t...

Flywheel Housing Gasket for the 200 TDi diesel engine, sealing the joint between the flywheel (or drive plate) housing and the rear face of the cra...

Flywheel Housing Gasket for the 200 TDi diesel engine, sealing the joint between the flywheel (or drive plate) housing and the rear face of the cra...

Cyclone Breather Filter for the crankcase ventilation system on the four-cylinder 2.5L diesel engine (naturally aspirated, 200TDi and 300TDi). Mou...

Side Cover Gasket sealing the cylinder-block side cover (tappet inspection cover) to the block face on diesel engines. The side cover closes the p...

Front Cover Gasket sealing the timing cover to the front face of the cylinder block on the 300TDi 2.5L turbo diesel engine. It forms the oil-tight...

Oil Separator Drain Hose for the crankcase ventilation system on the 2.5L naturally aspirated diesel and 200TDi turbo diesel engines. It drains th...

Water Pump Inlet Gasket - seals the water pump inlet housing against the engine front cover within the coolant circuit. It forms the joint between...

Flywheel Dowel is a locating dowel that registers the flywheel to the crankshaft rear flange. Pressed into the crankshaft flange, it sets the angu...

Front Crankshaft Oil Seal seals the front of the crankshaft where it passes through the timing cover. It prevents oil loss at the crankshaft pulle...

Pulley

Oil Drain Pipe Gasket for the turbocharger oil return line on the 300TDi 2.5L turbo diesel engine. It seals the flanged joint where the external o...

Connecting Rod Bolt for the Rover V8 EFI petrol engine, part of the connecting rod assembly in the engine bottom end. The bolt clamps the connecti...

Valve Stem Seal for the Rover V8 engine, part of the cylinder head valve train. The seal fits over the top of the valve stem where it passes throu...

Valve Stem Seal for the Rover V8 engine, part of the cylinder head valve train. The seal fits over the top of the valve stem where it passes throu...

Sensor oxygen FAE

Oil Level Indicator (Dipstick) Assembly for the Rover V8 petrol engine. The dipstick locates in the dipstick tube and allows the engine oil level ...

Cylinder Head Bolt for the 300TDi 2.5L turbo diesel engine, part of the cylinder head-to-block assembly. The bolt clamps the cylinder head onto th...

Washer – a flat washer used on the 2.5-litre 300TDi turbo diesel engine. The flat washer distributes the clamping load beneath a bolt or nut head.

Oil Pump Gasket for the Rover V8 petrol engine lubrication system. This gasket seals the oil pump to its mating face, maintaining oil pressure and...

Side Cover Gasket sealing the cylinder-block side cover (tappet inspection cover) to the block face, for petrol and diesel engines. The side cover...

Vacuum Pump Gasket for the 2.5L 300TDi diesel engine, sealing the vacuum pump mounting face to the cylinder block. The vacuum pump is driven from ...

Fuel Lift Pump Gasket seals the mechanical fuel lift pump to the engine on 2.5L diesel applications, including the 200TDi and 300TDi. Fitted betwe...

Drive Belt is the auxiliary drive belt for the 3.5L V8 petrol engine. Running from the crankshaft pulley, it drives the alternator and, where fitt...

Drive Belt is the auxiliary drive belt for the 3.5L V8 petrol engine. Running from the crankshaft pulley, it drives the alternator and, where fitt...

Crankshaft Sensor for the 2.5-litre 300TDi turbo diesel engine. The crankshaft position sensor reads the toothed signal from the rotating cranksha...

Coolant Temperature Sensor threads into the cylinder head and reports engine coolant temperature to the engine management system and the instrument...