Products

Radius Arm Pair - 3 Degree Caster Correction for the front suspension radius arm assembly on coil-sprung Land Rovers fitted with a 25-75 mm (1-3 in...

Rear Radius Arm locates the axle and controls its fore-and-aft movement, with geometry set for a 2 inch suspension lift. The revised arm restores ...

Handbrake Conversion Kit - converts the drum-type transmission brake to a disc and caliper arrangement on the rear output of the LT230 transfer box...

Designed for use with heavy-duty steering arms, this kit provides the necessary brackets and hardware for a solid fitment, enhancing steering stabi...

Clutch Kit for the 200 TDi and 300 TDi diesel engines, uprated to a heavy-duty specification. The clutch transmits drive from the engine to the ge...

Clutch Kit HD 200/300 TDi

Clutch Kit for the 200 TDi and 300 TDi diesel engines, uprated to a heavy-duty specification. The clutch transmits drive from the engine to the ge...

Front Steel Winch Bumper with a black protective finish, replacing the standard front bumper to add front-end protection and an integral winch moun...

HD Rear Bumper

CV Joint Kit for the front axle drive assembly. The constant velocity joint sits inside the swivel housing and transmits drive from the axle halfsh...

CV Joint Kit for the front axle drive assembly. The constant velocity joint sits inside the swivel housing and transmits drive from the axle halfsh...

CV Joint Kit for the front axle drive assembly. The constant velocity joint sits inside the swivel housing and transmits drive from the axle halfsh...

CV Joint Kit for the front axle drive assembly. The constant velocity joint sits inside the swivel housing and transmits drive from the axle halfsh...

CV Joint Kit for the front axle drive assembly. The constant velocity joint sits inside the swivel housing and transmits drive from the axle halfsh...

CV Joint Kit for the front axle drive assembly. The constant velocity joint sits inside the swivel housing and transmits drive from the axle halfsh...

Front Shock Absorber Turret is the tubular mounting tower that locates the upper end of the front damper in the front suspension. It bolts to the ...

Turret Securing Ring for the front shock absorber turret, supplied as a pair. The rings clamp the turret to its mounting in the front suspension. ...

Propshaft Spacer Kit for the driveline, fitting between the differential drive flange and the propeller shaft to add 15 mm of length. When a suspe...

Propshaft Spacer Kit (25mm) - a driveline spacer fitted between the propshaft flange and the transfer box or differential flange to restore the pro...

Double Cardan Front Propshaft Kit - a heavy-duty front propshaft for the LT230 transfer box, using a double cardan (constant-velocity) joint at the...

Rear Quarter Window Seal Set for the fixed rear quarter (side) glass. Supplied as a matched left- and right-hand pair, these rubber seals locate th...

Protective Coating Kit - Tintable (4 L) for applying a durable, textured surface coating to body panels, underbody areas, wheel arches, load beds, ...

Coating Spray Gun, bottle-mount type, for applying protective coating. This Schutz-style gun screws directly onto the 750ml coating bottle, so no s...

Alloy Wheel, 18 x 8 with ET20 offset and a 5 x 165.1 mm (five-stud) bolt pattern, finished in black. The wheel forms the mounting interface betwee...

Alloy Wheel - road wheel measuring 18 inch diameter by 8J rim width, with an ET20 offset and a 5 x 165 mm PCD stud pattern, finished in silver. Th...

Alloy Wheel - road wheel measuring 16 inch diameter by 7J rim width, with an ET20 offset and a 5 x 165 mm PCD stud pattern. Gloss black finish with...

Limited Slip Differential of the automatic torque-biasing (ATB) type, replacing the standard open differential inside the axle differential assembl...

Transfer Case Cover for the LT230 transfer case assembly, sealing the main housing against contamination and retaining the internal lubricant. The...

Extended Bump Stop - a direct replacement for the standard axle bump stop, mounting to the chassis bracket through two bolt holes. Taller than the...

Steering Damper Bush Kit - polyurethane replacement bushes for the steering damper mountings, fitting in the eyes at each end of the damper where i...

Paint-clearing screw from the standard fastener range. The thread is formed so that it cuts through the paint film as the screw is driven, leaving...

Screw - M6 metric fixing screw, 30 mm long. A general-purpose threaded fastener used to secure body panels, door-frame fittings and other bolted a...

Upgrade or replace your steering wheel boss with this high-quality 36-tooth adapter, designed specifically for Land Rover Defender to 1991 90/110 v...

Steering Wheel - a 14-inch three-spoke replacement wheel with a black vinyl rim and black centre. The wheel mounts to the steering column through ...

Steering Wheel is a 15-inch three-spoke replacement wheel that mounts to the steering column. It is supplied without a boss, so a separate fitting...

Stub Axle Kit - Rear Discovery 1 RRC

Stub Axle Kit - Front - RRC

Stub Axle Kit Rear - Discovery 1 RRC to JA032850

Flasher Relay installed in the indicator and hazard-warning circuit, controlling the flash rate of the turn-signal lamps. This 12V electronic unit...

Emergency Bulb and Fuse Kit - 12 volt, for vehicles using H4 headlamp bulbs. A compact set of replacement bulbs and fuses to carry in the vehicle,...

Steel Road Wheel - 7 x 16 pressed-steel wheel in the 8-spoke pattern, finished in white, ET00 offset. The pressed-steel construction withstands of...

Steel Road Wheel - 7 x 16 pressed-steel wheel in the 8-spoke pattern, finished in silver, ET00 offset. The pressed-steel construction withstands o...

Steel Road Wheel - 7 x 16 pressed-steel wheel in the 8-spoke pattern, finished in black, ET00 offset. The pressed-steel construction withstands of...

Steel Road Wheel - 7 x 16 pressed-steel wheel in the modular pattern, finished in white, ET08 offset. The pressed-steel construction withstands of...

Modular Steel Wheel in silver finish, 7 × 16 inch with ET08 offset, for coil-sprung Land Rover models with the standard 5-stud wheel fixing pattern...

Modular Steel Wheel - Black - 7J x 16 A modular steel road wheel finished in black, sized 7J x 16 with an ET08 offset. The steel construction suit...