Products

Starter Bush Kit - the set of bronze bushes that support the armature shaft of the inertia-type starter motor (Lucas Type 2M100) used on 4-cylinder...

Drain Plug for differential casings and LT230 transfer boxes. The tapered plug seals the oil drain, fill, and level holes in differential and axle...

Temperature Sensor mounted in the air filter (air cleaner) housing. This thermal sensor unit sits within the air intake housing and responds to th...

Vacuum unit

Cold Start Solenoid for the carburettor cold-start enrichment circuit on the V8 petrol carburettor induction system. The solenoid operates the col...

Gearbox Input/Output Member fitted to the Series III main gearbox, suffix A only. This component forms part of the synchromesh assembly within the...

Engine Bush Kit - Diesel

Fuel Filler Cap Seal for the fuel system of the Range Rover Classic. This rubber seal fits the hinged (flip-up) fuel filler cap and creates a fuel...

Track Rod End for the steering linkage, with a right-hand thread. The track rod end is a ball-jointed coupling at the end of the track rod that co...

This camshaft sprocket is designed for Land Rover V8 engines, providing precise timing and reliable performance.

GENUINE LR camshaft sprocket for Rover V8 engines

Carburettor Gasket sealing the inlet manifold adaptor elbow to the carburettor on the Rover V8 twin-carburettor petrol engine. Fitted between the ...

Thermostat Housing Gasket seals the thermostat housing (water outlet elbow) to the intake manifold on the 3.5L carburettor V8 engine. It sits in t...

Rocker Cover Breather Hose - Left-Hand for the crankcase ventilation system of the Rover 3.5L V8 twin-carburettor engine. This hose connects the l...

Drive Belt (V-belt) for the engine accessory drive system, transferring rotation from the crankshaft pulley to a driven accessory. This is a 13 mm...

Rocker Shaft for the valvetrain of the Rover V8 petrol engine. The shaft mounts on the cylinder head and carries the rocker arms, transferring pus...

Rocker Shaft Assembly forms part of the valvetrain (rocker gear) on the overhead-valve V8 petrol engine. Mounted on pedestals above the cylinder h...

Fan belt OEM DAYCO 10mm wide, 1235mm long

Oil Pump Gear for the 3.5L V8 engine oil pump, part of the lubrication system. The oil pump draws oil from the sump and pressurises it for deliver...

Front Brake Pad Set - the friction pads for the front-axle disc brakes. The pads sit in the caliper and are clamped against the brake disc by the c...

Front Brake Pad Set - the friction pads for the front-axle disc brakes. The pads sit in the caliper and are clamped against the brake disc by the c...

Brake Pads - With Springs

Front Brake Pad Set - friction pads for the front axle braking system. Ceramic-based pads that clamp against the front brake discs under caliper p...

Front Brake Pad Set - the friction pads for the front-axle disc brakes. The pads sit in the caliper and are clamped against the brake disc by the c...

Front Brake Pad Set - the friction pads for the front-axle disc brakes. The pads sit in the caliper and are clamped against the brake disc by the c...

Front Brake Pad Set for the front axle. Supplied as an axle set of disc brake pads for the front calipers, together with the pad fitting springs. ...

Tensioner Pulley Bearing for the auxiliary drive belt system on air-conditioned vehicles. It is the bearing carried within the idler/tensioner pul...

Distributor Gear

Bolt securing the exhaust manifold on the Rover V8 petrol engine. A 3/8" UNC x 1 1/8" fastener used to retain the exhaust manifold to the cylinder...

Fuel Pipe Olive is a compression ferrule used to seal a rigid fuel pipe union. The olive is compressed onto the pipe by the union nut to form a le...

Drive Belt for the coolant pump on the 3.5L V8 petrol engine, in the belt configuration used when air conditioning is fitted. The belt transfers d...

Idler Pulley for the auxiliary (ancillary) drive belt of the air-conditioning system. The pulley guides and tensions the belt that drives the air-...

Viscous Fan Assembly for the engine cooling system, mounting to the viscous coupling unit on the front of the engine. This 16", 7-blade white fan ...

Power Steering Pump Belt in the engine accessory drive system, driving the power steering pump. The belt transfers rotation from the crankshaft pu...

Rear Brake Pad Kit - a complete set of disc brake pads for the rear axle, fitted to the rear brake calipers. The pads clamp against the rear brake...